On The Origin of The High-Perihelion Scattered Disk: The Role of The Kozai Mechanism And Mean Motion Resonances

We study the transfer process from the scattered disk (SD) to the high-perihelion scattered disk (HPSD) (defined as the population with perihelion distances q > 40 AU and semimajor axes a>50 AU) by means of two different models. One model (Model 1) assumes that SD objects (SDOs) were formed closer to the Sun and driven outwards by resonant coupling with the accreting Neptune during the stage of outward migration (Gomes 2003b, Earth, Moon, Planets 92, 29–42.). The other model (Model 2) considers the observed population of SDOs plus clones that try to compensate for observational discovery bias (Fernández et al. 2004, Icarus , in press). We find that the Kozai mechanism (coupling between the argument of perihelion, eccentricity, and inclination), associated with a mean motion resonance (MMR), is the main responsible for raising both the perihelion distance and the inclination of SDOs. The highest perihelion distance for a body of our samples was found to be q = 69.2 AU. This shows that bodies can be temporarily detached from the planetary region by dynamical interactions with the planets. This phenomenon is temporary since the same coupling of Kozai with a MMR will at some point bring the bodies back to states of lower-q values. However, the dynamical time scale in high-q states may be very long, up to several Gyr. For Model 1, about 10% of the bodies driven away by Neptune get trapped into the HPSD when the resonant coupling Kozai-MMR is disrupted by Neptune’s migration. Therefore, Model 1 also supplies a fossil HPSD, whose bodies remain in non-resonant orbits and thus stable for the age of the solar system, in addition to the HPSD formed by temporary captures of SDOs after the giant planets reached their current orbits. We find that about 12 – 15% of the surviving bodies of our samples are incorporated into the HPSD after about 4 – 5 Gyr, and that a large fraction of the captures occur for up to the 1:8 MMR (a ⋍ 120 AU), although we record captures up to the 1:24 MMR (a ≃ 260 AU). Because of the Kozai mechanism, HPSD objects have on average inclinations about 25°–50°, which are higher than those of the classical Edgeworth–Kuiper (EK) belt or the SD. Our results suggest that Sedna belongs to a dynamically distinct population from the HPSD, possibly being a member of the inner core of the Oort cloud. As regards to 2000 CR₁₀₅ , it is marginally within the region occupied by HPSD objects in the parametric planes (q,a) and (a,i), so it is not ruled out that it might be a member of the HPSD, though it might as well belong to the inner core.     

Determination of selenographic positions

The systematic examination of lunar surface characteristics is entering a new phase requiring detailed measurements of position for purposes of cartography, surface and near-surface navigation, and correlation and data reduction of scientific experiments, such as gravimetry, active seismology, geological sampling, etc.A method of obtaining selenographic positions is described in this paper, and an example of the technique is presented.     

Infrasonic detection of a Leonid bolide: 1998 November 17

Abstract— During the early morning hours of the night of the peak of the annual Leonid meteor shower on 1998 November 17, a bright fireball (approximately ?12 to ?14 visual magnitude at 100 km in the zenith) was observed over northern New Mexico with visual sightings as far away from Los Alamos as Albuquerque (～150 km to the south of Los Alamos), including direct persistent trail observations at the U. S. A. F. Starfire Optical Range (SOR), which is also near Albuqerque. This event did not produce any sonic boom reports, presumably because of its high altitude. It was also detected locally by an infrared radiometer at Sandia National Laboratory and by an intensified charge-coupled device (CCD) camera located in Placitas, New Mexico. Subsequent investigations of the data from the six infrasound arrays used by Los Alamos National Laboratory (LANL) and operated for the Department of Energy as a part of the Comprehensive Test Ban Treaty (CTBT) Research and Development program for the International Monitoring System (IMS) showed the presence of an infrasonic signal from the proper direction at the correct time for this bolide from two of our six arrays (both located in Los Alamos). The infrasound recordings (i.e., the wave amplitude and period data) indicated that an explosion occurred in the atmosphere at a source height of ～93.5 km (with respect to sea level) or ～90 km with respect to the altitude of Los Alamos, having its origins slightly to the north and west of Los Alamos. Purely geometric solutions from the ground observers reports combined with direct measurements from the CCD camera at Placitas produced a source height of 91 ± 7 km. The signal characteristics analyzed from 0.5 to 3.0 Hz include a total duration of about 3–4 s for a source directed from Los Alamos toward 353.6 ± 0.4° measured from true north at a maximum elevation arrival angle of ～72.7°. The latter was deduced on the basis of the observed signal trace velocities (for the part of the recording with the highest cross-correlation) and ranged from a constant value of about 920–1150 m/s (depending on the window length used in the analysis) for a ray trajectory along a direct refractive path between the source and the Los Alamos arrays. The dominant signal frequency at maximum amplitude at Los Alamos was ～0.71 Hz. These highly correlated signals had a peak to peak, maximum amplitude of ～2.1 microbars (0.21 Pa). Using several methods that incorporate various observed signal characteristics, total distance traveled, etc., our analysis indicates that the bolide probably had a source energy of ～1.14 t (TNT equivalent) or 4.77 × 10⁹ J. This is ～14.1× smaller than the source energy estimate made using the infrasonic, empirical source energy relationship for low-altitude stationary point sources developed in the 1960s by the Air Force Technical Applications Center (AFTAC), Patrick Air Force Base, Florida. This relation was originally developed, however, for much larger source energies and at much longer ranges.     

Using existing data to estimate aquifer properties, Great Lakes Region, USA

To determine specific storage and porosity, areally limited and time-consuming aquifer tests are frequently done. Hydrogeologic studies often do not have the resources to collect such data and rely on existing data sources for aquifer properties. An alternative tool for determining these aquifer properties is the analysis of earth tides. The objective of this study was to determine whether existing water-level and barometric-pressure data could be used to determine aquifer properties, such as porosity and specific storage, on a regional scale. In this study, national databases from the Great Lakes Region were queried for continuous records of groundwater-level and barometric-pressure data. Records from 37 selected wells were then analyzed for barometric efficiency and earth-tide responses. Specific-storage (S(s) ) and porosity values were determined, and the quality of the results were assessed with a measure of the "goodness of fit" (percent variance) of reconstruction of the response. Records from wells completed in several aquifer systems were analyzed with varying degrees of success. Aquifer S(s) values ranging from 5.9 × 10(-8) to 3.8 × 10(-6) /m were derived, with percent variance of reconstruction ranging from 1% to 78%. Comparisons with aquifer and laboratory testing of S(s) and porosity are favorable if the percent variance of reconstruction is above about 30%. Although the earth-tide-analysis method is not suitable for every situation, the S(s) and porosity of aquifers can, in many places, be estimated with existing water-level and barometric-pressure data or with data that are relatively inexpensive to collect.     

Paragenesis of unusual Fe-cordierite (sekaninaite)-bearing paralava and clinker from the Kuznetsk coal basin,Siberia, Russia

Sekaninaite (X_Fe > 0.5)-bearing paralava and clinker are the products of ancient combustion metamorphism in the western part of the Kuznetsk coal basin, Siberia. The combustion metamorphic rocks typically occur as clinker beds and breccias consisting of vitrified sandstone–siltstone clinker fragments cemented by paralava, resulting from hanging-wall collapse above burning coal seams and quenching. Sekaninaite–Fe-cordierite (X_Fe = 95–45) is associated with tridymite, fayalite, magnetite, ± clinoferrosilite and ±mullite in paralava and with tridymite and mullite in clinker. Unmelted grains of detrital quartz occur in both rocks (<3 vol% in paralavas and up to 30 vol% in some clinkers). Compositionally variable siliceous, K-rich peraluminous glass is <30% in paralavas and up to 85% in clinkers. The paralavas resulted from extensive fusion of sandstone–siltstone (clinker), and sideritic/Fe-hydroxide material contained within them, with the proportion of clastic sediments ≫ ferruginous component. Calculated dry liquidus temperatures of the paralavas are 1,120–1,050°C and 920–1,050°C for clinkers, with calculated viscosities at liquidus temperatures of 10^1.6–7.0 and 10^7.0–9.8 Pa s, respectively. Dry liquidus temperatures of glass compositions range between 920 and 1,120°C (paralava) and 920–960°C (clinker), and viscosities at these temperatures are 10^9.7–5.5 and 10^8.8–9.7 Pa s, respectively. Compared with worldwide occurrences of cordierite–sekaninaite in pyrometamorphic rocks, sekaninaite occurs in rocks with X_Fe (mol% FeO/(FeO + MgO)) > 0.8; sekaninaite and Fe-cordierite occur in rocks with X_Fe 0.6–0.8, and cordierite (X_Fe < 0.5) is restricted to rocks with X_Fe < 0.6. The crystal-chemical formula of an anhydrous sekaninaite based on the refined structure is | \textK_0.02 |(\textFe_1.54^{2 +} \textMg_0.40 \textMn_0.06 )_{\Upsigma 2.00}^M [(\textAl_1.98 \textFe_0.02^{2 +} \textSi_1.00 )_{\Upsigma 3.00}^T1 (\textSi_3.94 \textAl_2.04 \textFe_0.02^{2 +} )_{\Upsigma 6.00}^T2 \textO₁₈ ]. \left| {{\text{K}}_{0.02} } \right|({\text{Fe}}_{1.54}^{2 + } {\text{Mg}}_{0.40} {\text{Mn}}_{0.06} )_{\Upsigma 2.00}^{M} [({\text{Al}}_{1.98} {\text{Fe}}_{0.02}^{2 + } {\text{Si}}_{1.00} )_{\Upsigma 3.00}^{T1} ({\text{Si}}_{3.94} {\text{Al}}_{2.04} {\text{Fe}}_{0.02}^{2 + } )_{\Upsigma 6.00}^{T2} {\text{O}}_{18} ].     

Energetics of radiation damage in natural zircon (ZrSiO4)

Transposed temperature drop calorimetry at 1000 °C was performed on natural zircons (ZrSiO₄) from Sri Lanka that were partially to completely metamict due to α-decay event damage (0.06 to 11.7×10¹⁵ α-decay events/mg). The enthalpy of annealing at room temperature (ΔH_anneal) varies sigmoidally as a function of radiation dose. ΔH_anneal reaches a saturation plateau at radiation doses greater than 5×10¹⁵ α-decay events/mg. The annealing of several samples to a crystalline structure with broadened diffraction peaks does not significantly affect the enthalpy of annealing. The large magnitude of the enthalpy of annealing plateau, ?59±3 kJ/mol, suggests that the damage to the structure is pervasive on the scale of Angstroms, consistent with the loss of mid-range order characteristic of a glass. The energetics are consistent with, but do not require, chemical heterogeneity caused by micro-domains of amorphous SiO₂-rich and ZrO₂-rich regions in the metamict state.     

Timing and setting of skarn and iron oxide formation at the Smältarmossen calcic iron skarn deposit, Bergslagen, Sweden

Abundant iron oxide deposits including banded iron formations, apatite iron oxide ores, and enigmatic marble/skarn-hosted magnetite deposits occur in the Palaeoproterozoic Bergslagen region, southern Sweden. During the last 100 years, the latter deposit class has been interpreted as contact metasomatic skarn deposits, metamorphosed iron formations, or metamorphosed carbonate replacement deposits. Their origin is still incompletely understood. At the Smältarmossen mine, magnetite was mined from a ca. 50-m-thick calcic skarn zone at the contact between rhyolite and stratigraphically overlying limestone. A syn-volcanic dacite porphyry which intruded the footwall has numerous apophyses that extend into the mineralized zone. Whole-rock lithogeochemical and mineral chemical analyses combined with textural analysis suggests that the skarns formed by veining and replacement of the dacite porphyry and rhyolite. These rocks were added substantial Ca and Fe, minor Mg, Mn, and LREE, as well as trace Co, Sn, U, As, and Sr. In contrast, massive magnetite formed by pervasive replacement of limestone. Tectonic fabrics in magnetite and skarn are consistent with ore formation before or early during Svecokarelian ductile deformation. Whereas a syngenetic–exhalative model has previously been suggested, our results are more compatible with magnetite formation at ca. 1.89 Ga in a contact metasomatic skarn setting associated with the dacite porphyry.