The luminosity oscillation of X-ray bursters and recurrent novae

Thermo-mechanical oscillations of a radiating spherically-symmetric shell containing a fermion gas (i.e., oscillation where only mechanical, thermodynamical, and eventually radiation phenomena are taken into account) are studied. With a reasonable choice of the three relevant parameters all other observational data are similar to the ones of X-ray bursters and recurrent novae.Therefore, thermo-mechanical oscillations could play an important role in the oscillation spectrum of these astronomical objects.     

Magma mixing and convective compositional layering within the Vesuvius magma chamber

The pumice-fall deposits of the last two Plinian eruptions of Vesuvius-a.d. 79 Pompei and 3700 b.p. Avellino-show a marked vertical compositional variation from white phonolite at the base to grey tephritic phonolite at the top. In both Avellino and Pompei sequences a compositional gap separates white from grey pumice. Grey and white pumice have distinct Sr and Nd isotopic compositions (grey pumice: ⁸⁷Sr/³⁶Sr=0.70749-56, ¹⁴³Nd/¹⁴⁴Nd=0.512507 for Pompei; 0.70760-69, 0.512504 for Avellino; white pumice: 0.70757-78 for Pompei; 0.70729-42 for Avellino). K-feldspar separated from both grey and white pumice has, in all cases, a white ⁸⁷Sr/⁸⁶Sr ratio (0.70766-79 for Pompei, 0.70728-33 for Avellino). The observed variations are interpreted as reflecting a pre-eruptive zonation of the magma chamber. Although mineralogical evidence of interaction between magma and calcareous country rocks exists in both eruptions, crustal contamination has not significantly modified the isotopic signatures of the erupted products. Petrographic and isotopic evidence of syneruptive magma mingling occur in Pompei grey pumice as well as in Avellino white and grey pumice, but they do not fully explain all the observed geochemical and isotopic variations. These variations are related to the complex refilling history of the magmatic system and result by fractional crystallization and mixing processes acting within the magma chamber. Preliminary data from other Plinian and subplinian sruptions of the Somma-Vesuvius point out the repeticive behaviour of ⁸⁷Sr/⁸⁶Sr variation in the last 25 000 years, hence suggesting a single magma chamber and continuity of the feeding system.     

A seismic source zone model for the seismic hazard assessment of the Italian territory

We designed a new seismic source model for Italy to be used as an input for country-wide probabilistic seismic hazard assessment (PSHA) in the frame of the compilation of a new national reference map.

We started off by reviewing existing models available for Italy and for other European countries, then discussed the main open issues in the current practice of seismogenic zoning.

The new model, termed ZS9, is largely based on data collected in the past 10 years, including historical earthquakes and instrumental seismicity, active faults and their seismogenic potential, and seismotectonic evidence from recent earthquakes. This information allowed us to propose new interpretations for poorly understood areas where the new data are in conflict with assumptions made in designing the previous and widely used model ZS4.

ZS9 is made out of 36 zones where earthquakes with M_w > = 5 are expected. It also assumes that earthquakes with M_w up to 5 may occur anywhere outside the seismogenic zones, although the associated probability is rather low. Special care was taken to ensure that each zone sampled a large enough number of earthquakes so that we could compute reliable earthquake production rates.

Although it was drawn following criteria that are standard practice in PSHA, ZS9 is also innovative in that every zone is characterised also by its mean seismogenic depth (the depth of the crustal volume that will presumably release future earthquakes) and predominant focal mechanism (their most likely rupture mechanism). These properties were determined using instrumental data, and only in a limited number of cases we resorted to geologic constraints and expert judgment to cope with lack of data or conflicting indications. These attributes allow ZS9 to be used with more accurate regionalized depth-dependent attenuation relations, and are ultimately expected to increase significantly the reliability of seismic hazard estimates.     

A late Neoproterozoic paleomagnetic pole for the Congo craton: Tectonic setting, paleomagnetism and geochronology of the Nola dike swarm (Central African Republic)

New structural, geochronological and paleomagnetic data were obtained on dolerite dikes of the Nola region (Central African Republic) at the northern border of the Congo craton. In this region, metavolcanic successions were thrust southward onto the craton during the Panafrican orogenic events. Our structural data reveal at least two structural klippes south of the present-day limits of the Panafrican nappe suggesting that it has once covered the whole Nola region, promoting the pervasive hydrothermal greenschist metamorphism observed in the underlying cratonic basement and also in the intrusive dolerite dikes. Paleomagnetic measurements revealed a stable dual-polarity low-inclination magnetization component in nine dikes (47 samples), carried by pyrrhotite and magnetite. This component corresponds to a paleopole at 304.8°E and 61.8°S (dp = 5.4, dm = 10.7) graded at Q = 6. Both metamorphism and magnetic resetting were dated by the ⁴⁰Ar/³⁹Ar method on amphibole grains separated from the dikes at 571 ± 6 Ma. The Nola pole is the first well-dated paleomagnetic pole for the Congo craton between 580 and 550 Ma. It marks a sudden change in direction of the Congo craton apparent polar wander path at the waning stages of the Panafrican orogenic events.     

Experimental solidification of anhydrous latitic and trachytic melts at different cooling rates: The role of nucleation kinetics

Two sets of cooling experiments were run at atmospheric conditions for two anhydrous starting latitic and trachytic melts: 1) five cooling rates (25, 12.5, 3, 0.5, and 0.125 °C/min) between 1300° and 800 °C, and 2) a 0.5 °C/min cooling rate from 1300 °C with quench temperatures at 1200°, 1100°, 1000° and 900 °C. Trachytic run-products are invariably glassy. Nucleation is also suppressed in the latitic run-products at the three highest cooling rates. Conversely, in the 0.5 and 0.125 °C/min runs, latites have a crystal content of  90 vol.%. The phases are: plagioclase, clinopyroxene, glass and iron-bearing oxide (in order of abundance). The variable quench temperatures, investigated by coupling experiments with Pt wire and Pt capsule sample containers in set 2, again did not produce crystallization of trachyte, whereas latitic samples are characterized by  10 vol.% of oxides, pyroxenes and plagioclase (in order of appearance), at temperature < 1000 °C. Effects of (preferential) heterogeneous nucleation on sample holders, of superheating degree, and chemical species loss during cooling are absent for both melt compositions. The difference of solidification paths between these two silicate melts can be ascribed only to their small chemical differences. In comparison with calculated equilibrium conditions all the experimental latitic and trachytic run-products revealed strong kinetic effects, interpretable in the light of the nucleation theory. The glass-forming ability (GFA) of trachyte is higher, whereas their critical cooling rate (Rc) is lower (< 0.125 °C/min), in comparison to latitic melts (Rc > 0.5 °C/min). The experimental results carried out in this study can be applied to lava flows and domes; trachytic lavas are able to flow for longer period with respect to latitic ones in a metastable condition. Glass-rich terrestrial lavas, i.e. obsidians, can be the result of sluggish nucleation kinetics due to the relative high polymerisation of evolved silicate melts.     

The double solid reactant method: II. An application to the shallow groundwaters of the Porto Plain,Vulcano Island (Italy)

This paper presents an example of application of the double solid reactant method (DSRM) of Accornero and Marini (Environmental Geology, 2007a), an effective way for modeling the fate of several dissolved trace elements during water–rock interaction. The EQ3/6 software package was used for simulating the irreversible water–rock mass transfer accompanying the generation of the groundwaters of the Porto Plain shallow aquifer, starting from a degassed diluted crateric steam condensate. Reaction path modeling was performed in reaction progress mode and under closed-system conditions. The simulations assumed: (1) bulk dissolution (i.e., without any constraint on the kinetics of dissolution/precipitation reactions) of a single solid phase, a leucite-latitic glass, and (2) precipitation of amorphous silica, barite, alunite, jarosite, anhydrite, kaolinite, a solid mixture of smectites, fluorite, a solid mixture of hydroxides, illite-K, a solid mixture of saponites, a solid mixture of trigonal carbonates and a solid mixture of orthorhombic carbonates. Analytical concentrations of major chemical elements and several trace elements (Cr, Mn, Fe, Ni, Cu, Zn, As, Sr and Ba) in groundwaters were satisfactorily reproduced. In addition to these simulations, similar runs for a rhyolite, a latite and a trachyte permitted to calculate major oxide contents for the authigenic paragenesis which are comparable, to a first approximation, with the corresponding data measured for local altered rocks belonging to the silicic, advanced argillic and intermediate argillic alteration facies. The important role played by both the solid mixture of trigonal carbonates as sequestrator of Mn, Zn, Cu and Ni and the solid mixture of orthorhombic carbonates as scavenger of Sr and Ba is emphasized.

Geostatistical estimation of chemical contamination in stream sediments: The case study of Vale das Gatas mine (northern Portugal)

Based on an environmental geochemistry case study carried out in the neighbourhood of a W–Sn abandoned mine, the pollution in stream sediments was modelled through a Global Contamination Index. Such an index permits one to summarize the combination of deleterious elements in a single variable, obtained by the projection of samples onto the first axis of a PCASD (Principal Components Analysis of Standardized Data) applied to the entire n × p matrix containing the available concentrations of p = 16 elements in the set of n = 220 collected samples.In order to provide a sound basis for a coherent planning of the remediation process which will be put in operation in the affected area, it is necessary to balance the costs of reclaiming with the probabilities of exceeding the upper limits accepted for concentrations of environmentally harmful elements in sediments. Given these limits, they are back-transformed in the index values, providing a practical threshold between ‘clean’ and ‘contaminated’ samples. On the other hand, the minimum dimension of the cell to be reclaimed is restrained by the selected remediation process to be applied in the affected area. Hence, to meet the constraints of such a remediation process, it is required to estimate the probabilities of exceeding the index threshold in technologically meaningful sub-areas. For this end, the Indicator Block Kriging technique was applied, producing a series of maps where sub-areas to be reclaimed can be spotted for different probability levels. These maps, on which the decision making remediation agency can rely for its cost-benefit analysis, take into account both the spatial structure of ‘clean’ vs. ‘contaminated’ samples and the constraints of the reclaiming process.     

Distrubution of Dissolved and Particulate Iron, copper and Manganese in the Shelf waters of the Ross sea (Antarctica)

Abstract. During the austral summer 1997–98, within the framework of the activities of the Climatic Long-term Interaction for the Massbalance in Antarctica (CLIMA) Project of the Italian National Program for Antarctic Research (PNRA) in the Ross Sea, measurements were conducted to focus on the role of dissolved iron, copper and manganese as micronutrients, and on their distribution in suspended particulate matter in different water masses. Sampling was carried out in two selected shelf areas, both important for formation and mixing processes of the water bodies.
Metal data were evaluated together with physical measurements and classical chemical parameters such as oxygen and nutrients.
In both the studied areas, the distribution of dissolved metals along the waste column confirmed their micronutrient behaviour, showing depletion where phytoplanktonic activities occurred.
The trend of particulate metals underlined the scavenging phenomena along the water column and presented an interesting correlation at intermediate depths with the amount and origin of suspended matter.     

A new methodology developed by cetena to assess the seakeeping behaviour of marine vessels

The paper describes an analytical method to determine an operability index for a marine vehicle when its geometric characteristics, the geographical area in which the vessel is supposed to operate, and the limiting criteria for operations are known. The computer program based on strip theory provides reliable results not only for conventional hullforms, but also for catamarans, offshore vehicles, etc. The results are presented in the form of figures for different vessels, namely, crane barge, naval vessels and SWATH type catamarans. The authors are of the opinion that the proposed method would provide the designer with a valid tool to improve the seakeeping qualities of a vessel, while taking into account the limiting conditions imposed due to seaway operations.