In Situ Measurement of Electro-Osmotic Fluxes and Conductivity Using Single Wellbore Tracer Tests

Electro-osmosis (EO), the movement of water through porous media in response to an electric field, offers a means for extracting contaminated ground water from fine-grained sediments, such as clays, that are not easily amenable to conventional pump-and-treat approaches. The EO-induced water flux is proportional to the voltage gradient in a manner analogous to the flux dependence on the hydraulic gradient under Darcy's law. The proportionality constant, the soil electro-osmotic conductivity or k_eo, is most easily measured in soil cores using bench-top tests, where flow is one-dimensional and interfering effects attributable to Darcy's law can be directly accounted for. In contrast, quantification of EO fluxes and k_eo in the field under deployment conditions can be difficult because electrodes are placed in ground water wells that may be screened across a heterogeneous mixture of lithologies. As a result, EO-induced water fluxes constitute an approximate radial flow system that is superimposed upon a Darcy flow regime through permeable pathways that may or may not be coupled with hydraulic head differences created by the EO-induced water fluxes. A single well comparative tracer test, which indirectly measures EO fluxes by comparing wellbore tracer dilution rates between background and EO-induced water fluxes, may provide a means for routinely quantifying the efficacy of EO systems in such settings. EO fluxes measured in field tests through this technique at a ground water contamination site were used to estimate a mean k_eo value through a semianalytic line source model of the electric field. The resulting estimate agrees well with values reported in the literature and with values obtained with bench-top tests conducted on a soil core collected in the test area.     

Carbonate-hosted siliceous crust type mineralization of Carnic Alps (Italy-Austria)

A carbonate-hosted stratabound siliceous crust type (SCT) mineralization (base metal sulphides, barite, fluorite) occurs over large areas of Carnic Alps and Karawanken in the Eastern Alps. It concerns a pervasively silicified lithological unit, up to some tens of metres thick, which caps the unconformity landscapes developed on epicontinental Devonian–Dinantian carbonates. The SCT mineralization is directly overlaid by different transgressive siliciclastic sediments, which range from Lower Carboniferous to Lower Permian. The presence of fragments of the SCT mineralization in the transgressive siliciclastic sediment bounds its whole lithological evolution within a short stratigraphic interval of Lower Carboniferous age. Selected features of the regional and lithostratigraphic setting are discussed. The chemical characterisation is based on the statistical evaluation of compositional data of 581 selected samples. Three significant groups of elements have been distinguished: (1) the hydrological and metasomatically active elements (Si, Ba, F), which show a strong negative correlation amongst themselves and characterise the silica-saturated aqueous solutions; (2) the terrigenous elements (Al₂O₃, K₂O, Fe_tot, TiO₂, B, Be, Ce, La, Nb, V, Y, Zr), which suggest a continental margin environment for silica deposition; (3) the sulphide metals (Cu, Pb, Zn, Ni, Sb, As, Hg, Cd), which define the metalliferous signature of the SCT mineralization.Some consistent, but still debatable genetic aspects of the SCT mineralization are as follow: (1) silica may be supplied by illitization of clay-rich basinal sediments during their diagenesis. δ¹⁸O of microcrystalline quartz ranges from +18.5‰ and +24.6‰ and is very similar to δ¹⁸O of authigenic quartz deriving from diagenetic processes of illitization of clay-rich basinal sequences. (2) The diagenetic evolution of these sediments may trigger off the movement of silica-rich marine pore waters. δ³⁴S of barite ranges from +15.5‰ to +19.3‰ with an average of +17.7‰ and are in good agreement with δ³⁴S of sulphate in ocean waters of Upper Devonian–Lower Carboniferous age. (3) A convective hydrological system, connected with sinsedimentary transtensive tectonics, active in the Carnic Alps since the Frasnian, may be the transport mechanism of aqueous solutions. (4) A weak drop in pH in the dominant carbonate environment represents the conditions for silica precipitation.SCT mineralization, showing persistent, independent and distinct characters, occurs over large areas also in other sites of the Alpine belt and outside Italy and Austria. Therefore, it points to important markers for some sedimentary sequences as well as to a worldwide significant cyclic metallogenic event. It represents a new ore deposit-type within the carbonate-hosted mineralization.     

Plio-Quaternary volcanotectonic activity in the northern sector of the Main Ethiopian Rift: relationships with oblique rifting

Deformation and magmatism within the 90 km wide northern Ethiopian Rift system is concentrated along a narrow zone - the Wonji Fault Belt. Two key areas (the Nazret-Dera and Asela-Ziway areas), located along the eastern margin of the north-northeast to northeast trending Main Ethiopian Rift, have been investigated in order to reconstruct the recent tectonomagmatic evolution of the northern branch of the Main Ethiopian Rift. In these areas, Early Pleistocene volcanic products (Wonji Group) overlie Pliocene volcanic rocks (Eastern Margin Unit). Detailed stratigraphical reconstructions have revealed the presence of several tectonomagmatic units which can be correlated between the two study areas. The stratigraphical and petrological study of these units outlined (1) the bimodal composition (basalts-pantellerites) of the oldest and youngest units and the unimodal character (pantellerites) of the products erupted during the intervening period; (2) the mainly fissural origin of the ignimbrites and oldest basalts; and (3) a mafic/felsic volumetric ratio of 1:5.The geological data suggest that, around the Pliocene-Quaternary boundary, a change in the stress field occurred in this Main Ethiopian Rift sector, passing from a direction of extension roughly orthogonal to the rift shoulders, to oblique rifting related to an east-west trending extension. In this framework the change in the style of volcanism observed in the Nazret-Dera and Asela-Ziway areas can be related to the change of the stress field. A new geodynamic model is presented for the Late Pliocene to Recent evolution of this sector of the Main Ethiopian Rift. According to this model, a large volume of rhyolitic products was erupted during an oblique rifting phase, following a previous period of pure extension. The change in the tectonic regime favoured partial melting of the underplated basalts as a decrease in the pressure and an elevation of isotherms occurred.     

On gamma-ray emission from CYG X-2

We discuss the importance of hard X- and gamma-ray emission from thermal X-ray sources to obtain a more realistic picture of these objects.In particular, we show that the inverse Compton effect is a possible mechanism of gamma-ray emission from sources of this kind and apply our consideration to the specific case of Cyg X-2.     

Improvement of Nakamura technique by singular spectrum analysis

In this work we investigate the application of the Singular Spectrum Analysis to improve Nakamura Technique. The SSA has a wide and multidisciplinary range of applications; it allows a time series to be decomposed into different components, e.g. the signal itself, as well as various noise components, which can be subsequently removed from the data. Removal of the minor component of the data can lead to significant improvements in the identification of the system. In this paper the use of SSA Technique allows to optimize the signal to noise ratio before computing the classical Nakamura spectral ratios. A number of typical applications are also presented.     

Ordovician igneous and metamorphic units in southeastern Puna: New U–Pb and Sm–Nd data and implications for the evolution of northwestern Argentina

New field, petrological, geochemical, and geochronological data (U–Pb and Sm–Nd) for Ordovician rock units in the southeastern Puna, NW Argentina, indicate two lithostratigraphic units at the eastern–northeastern border of salar Centenario: (1) a bimodal volcanosedimentary sequence affected by low- to medium-grade metamorphism, comprising metasediments associated with basic and felsic metavolcanic rocks, dated 485 ± 5 Ma, and (2) a plutonic unit composed of syenogranites to quartz-rich leucogranites with U–Pb zircon ages between 462 ± 7 and 475 ± 5 Ma. Felsic metavolcanic and plutonic rocks are peraluminous and show similar geochemical differentiation trends. They also have similar Sm–Nd isotopic compositions (T_DM model ages of 1.54–1.78 Ga; ε_Nd(T) values ranging from −3.2 to −7.5) that suggest a common origin and derivation of the original magmas from older (Meso-Paleoproterozoic?) continental crust. Mafic rocks show ε_Nd(T) ranging from +2.3 to +2.5, indicating a depleted mantle source. The data presented here, combined with those in the literature, suggest Ordovician magmatism mainly recycles preexisting crust with minor additions of juvenile mantle-derived material.     

Discussion of: Ortega-Flores et al. (2018) Provenance analysis of Oligocene sandstone from the Cerro Pelón area,southern Gulf of Mexico.https://doi.org/10.1080/00206814.2018.1476922

ABSTRACT

We discuss the 2018 publication that reports petrographic, heavy mineral data, mineral chemistry, and zircon geochronology for Oligocene sandstones in the Cerro Pelón area in southern Mexico Sureste basin. As the title of their paper says, the goal of their study is to establish the source (s) of the voluminous Cenozoic section in this region, reaching several kilometres in thickness and important as a petroleum system. These authors conclude that Oligocene sandstones of La Laja Formation were mostly sourced from eclogite- to greenschist-facies metasedimentary, metaigneous, and ultramafic rocks of the Guatemala suture complex. Minor contributions from the Chiapas Massif Complex, exposed directly to the south ~60 km of the Cerro Pelón area, were also suggested by the authors. They thus conclude that the Palaeogene stratigraphic record in southeastern Mexico was mostly controlled by the development of the Caribbean–North America plate boundary rather than by orogenic processes at the Pacific margin of North America. Presently, we do not agree with the conclusions of Ortega Flores and colleagues who studied the Cerro Pelón section, thus some discussion is required. Serpentinite bearing Nanchital Conglomerate is well exposed in the Cerro Pelón area, and high- to low-grade metamorphic rocks experienced an uplift in the vicinity of the Cerro Pelón area at the time of deposition of the La Laja Formation. We believe the data are better explained by multiple local sources in southern and eastern Oaxaca as well as sources to the south and southwest, which include the Cenozoic coastal batholith, the Grenvillean/Guichicovi basement complexes, the Chiapas Massif, the Mazatlán schist and other units in the Cuicateco Belt, as well as the Mesozoic cover of these areas (Todos Santos Formation, Cretaceous carbonate rocks, and Paleogene strata such as the Soyaló and Bosque Formations).     

Palaeomagnetic and geochronological results from the Cambro-Ordovician Granite Harbour Intrusives inland of Terra Nova Bay (Victoria Land, Antarctica)

Palaeomagnetic investigations and Rb–Sr dating were carried out on samples from two plutons from the Granite Harbour Intrusives of the Transantarctic Mountains inland of Terra Nova Bay. The Rb–Sr whole rock–biotite ages from Teall Nunatak (475±4, 483±4 Ma), a quartz-diorite pluton cropping out to the south of Priestley Glacier, are older than that from the Mount Keinath monzogranite (450±4 Ma), which is located to the north of the glacier. These results are consistent with the literature data, which suggest that during the last phases of the Ross Orogeny the cooling rate of the basement was significantly lower to the north than to the south of Priestley Glacier. The Teall Nunatak quartz-diorite is characterized by a stable magnetization, whose blocking-temperature spectrum ranges from 530 to 570 °C. At one site, the stable magnetization is screened by a large secondary component of opposite polarity, removed by thermal demagnetization below 300 °C. The characteristic directions after thermal demagnetization yielded a southern pole located at lat. 11°S, long. 21°E. The magnetization of Mount Keinath monzogranite consists of several components with overlapping stability spectra. A characteristic direction was isolated at one site only, obtained by demagnetizing the specimens in the temperature range from 380 to 460 °C.
  Comparison with the other East Antarctica poles shows that those from Victoria Land are very well grouped and give a reliable early Ordovician palaeopole (lat. 5°S, long. 23°E, with K =196 and A ₉₅=3.7°), whereas the poles from Wilkes, Enderby and Dronning Maud Land are dispersed. We tentatively advance the hypothesis that the dispersion reflects different magnetization ages due to the slow cooling of these regions during the last stages of the Ross Orogeny.     

Shallow landslides in deeply weathered slates of the Sierra de Collcerola (Catalonian Coastal Range, Spain)

Stability conditions in an area located NW of Barcelona (Spain) are discussed. Here, several mass movements were observed, mainly affecting weathered Paleozoic slates. Many of these failures involved slopes cut along recent infrastructures: debris flows, wedge and plane failures, generally surficial, occurred more frequently. After a detailed geological and geomorphologic survey, geomechanic characterization was carried out, according to RMR and SMR classifications. This rating gave a prediction of slope behaviour, in fairly good agreement with the real observed one.

Stability numerical analysis was carried out for the main cut slopes, based upon the Limit Equilibrium Method. First of all, the deterministic factor of safety was computed using the mean values of parameters. After that, a simulation technique based upon the Monte Carlo Method was applied in order to obtain factor of safety distributions. The probability of failure was estimated as P(F<1).

Finally, results from deterministic and probabilistic approaches were compared. The effectiveness of different possible remedial measures was highlighted by means of a sensitivity analysis, which showed that the more important parameters in the study area are the geometrical ones (height, slope and failure plane angles). The final technical solutions adopted are briefly outlined.