Growth mechanisms and geochemistry of carbonate concretions from the Cambrian Wheeler Formation (Utah,USA)

Carbonate concretions provide unique records of ancient biogeochemical processes in marine sediments. Typically, they form in organic‐rich mudstones, where a significant fraction of the bicarbonate required for carbonate precipitation is supplied from the decomposition of organic matter in the sediments. As a result, carbonates that comprise concretions are usually characterized by broad ranges in δ¹³C and include values that are significantly depleted relative to seawater. This article reports results from a physical, petrographic and geochemical analysis of 238 concretions from the Wheeler Formation (Cambrian Series 3), Utah, USA, which are unusual in several respects. Most prominently, they formed in organic‐poor mudstones (total organic carbon = 0·1 to 0·5%) and are characterized by a narrow range of δ¹³C that onlaps the range of contemporaneous seawater values. Subtle centre to edge trends in δ¹³C demonstrate that concretion precipitation was initiated by local chemical gradients set up by microbial activity in the sediments, but was sustained during growth by a large pool of inorganic bicarbonate probably derived from alkaline bottom waters. The large inorganic pool appears to have been important in facilitating rapid precipitation of the concretion matrix, which occurred via both displacive and replacive carbonate precipitation during early diagenesis. Stable isotope data from cogenetic pyrite (δ³⁴S) and silica (δ¹⁸O) phases provide insight into the evolution of biogeochemical processes during concretion growth, and suggest that concretions were formed almost entirely during sulphate reduction, with only minor modification thereafter. Concretions of the Wheeler Formation appear to represent an end‐member system of concretion formation in which rapid growth was promoted by ions supplied from sea‐water. As such, they offer insight into the spectrum of processes that may influence the growth of carbonate concretions in marine sediments.     

Archean greenstone-tonalite duality: Thermochemical mantle convection models or plate tectonics in the early Earth global dynamics?

Mantle convection and plate tectonics are one system, because oceanic plates are cold upper thermal boundary layers of the convection cells. As a corollary, Phanerozoic-style of plate tectonics or more likely a different version of it (i.e. a larger number of slowly moving plates, or similar number of faster plates) is expected to have operated in the hotter, vigorously convecting early Earth. Despite the recent advances in understanding the origin of Archean greenstone–granitoid terranes, the question regarding the operation of plate tectonics in the early Earth remains still controversial. Numerical model outputs for the Archean Earth range from predominantly shallow to flat subduction between 4.0 and 2.5 Ga and well-established steep subduction since 2.5 Ga [Abbott, D., Drury, R., Smith, W.H.F., 1994. Flat to steep transition in subduction style. Geology 22, 937–940], to no plate tectonics but rather foundering of 1000 km sectors of basaltic crust, then “resurfaced” by upper asthenospheric mantle basaltic melts that generate the observed duality of basalts and tonalities [van Thienen, P., van den Berg, A.P., Vlaar, N.J., 2004a. Production and recycling of oceanic crust in the early earth. Tectonophysics 386, 41–65; van Thienen, P., Van den Berg, A.P., Vlaar, N.J., 2004b. On the formation of continental silicic melts in thermochemical mantle convection models: implications for early Earth. Tectonophysics 394, 111–124]. These model outputs can be tested against the geological record. Greenstone belt volcanics are composites of komatiite–basalt plateau sequences erupted from deep mantle plumes and bimodal basalt–dacite sequences having the geochemical signatures of convergent margins; i.e. horizontally imbricated plateau and island arc crust. Greenstone belts from 3.8 to 2.5 Ga include volcanic types reported from Cenozoic convergent margins including: boninites; arc picrites; and the association of adakites–Mg andesites- and Nb-enriched basalts.Archean cratons were intruded by voluminous norites from the Neoarchean through Proterozoic; norites are accounted for by melting of subduction metasomatized Archean continental lithospheric mantle (CLM). Deep CLM defines Archean cratons; it extends to  350 km, includes the diamond facies, and xenoliths signify a composition of the buoyant, refractory, residue of plume melting, a natural consequence of imbricated plateau-arc crust. Voluminous tonalites of Archean greenstone–granitoid terranes show a secular trend of increasing Mg#, Cr, Ni consistent with slab melts hybridizing with thicker mantle wedge as subduction angle steepens. Strike-slip faults of 1000 km scale; diachronous accretion of distinct tectonostratigraphic terranes; and broad Cordilleran-type orogens featuring multiple sutures, and oceanward migration of arcs, in the Archean Superior and Yilgarn cratons, are in common with the Altaid and Phanerozoic Cordilleran orogens. There is increasing geological evidence of the supercontinent cycle operating back to  2.7 Ga: Kenorland or Ur  2.7–2.4 Ga; Columbia  1.6–1.4 Ga; Rodinia  1100–750 Ma; and Pangea  230 Ma. High-resolution seismic reflection profiling of Archean terranes reveals a prevalence of low angle structures, and evidence for paleo-subduction zones. Collectively, the geological–geochemical–seismic records endorse the operation of plate tectonics since the early Archean.     

Modeling Bedload Transport of Juvenile Bivalves: Predicted Changes in Distribution and Scale of Postlarval Dispersal

The potential consequences of bedload transport of postlarvae for patterns of distribution of marine invertebrates were explored by developing a bedload transport model for juvenile bivalves in a small estuary in New Jersey, USA. A simple numerical model of tidal current hydrodynamics was developed based on field measurements of shear stresses near the bottom. Burrowing behavior of bivalves was incorporated into the model of bedload transport by using estimates of entrainment rates of Gemma gemma and Mya arenaria in a laboratory flume, and jump lengths of the bivalves were estimated by methods previously developed for noncohesive particles. Based on the flood domination and strong gradient of shear stresses in the Navesink estuary, our model predicted that juvenile bivalves would accumulate in the center of the estuary, traveling up to several kilometers over 30 days. Field distributions of juvenile bivalves were consistent with the model predictions for other species of bivalves but not for G. gemma, for which field distributions of both <500- and >500-μm individuals were concentrated in the eastern end of the estuary. Differences between the bedload model and G. gemma distributions suggest that spatial variation in burrowing behavior or biological interactions are playing an important role in maintaining distribution patterns of this species in spite of high levels of bedload transport. This modeling approach is applicable to other juvenile benthic invertebrates that disperse as bedload and is a useful model against which to compare field observations of rates of transport and patterns of distribution and abundance.     

Carbon catalysed hydrogen exchange in petroleum source rocks

Exchange of carbon bound hydrogen has been observed when alkenes, saturated and aromatic hydrocarbons are heated at moderate temperatures on carbonaceous surfaces (activated carbon and coal). Isomerisation of alkenes and the formation of hydrogenated/dehydrogenated products from the saturated and aromatic reactants resulted. A suite of crude oils from the Carnarvon Basin (Western Australia) have been analysed with a view to comparing their relative abundances of structurally similar hydrocarbons. The consistent relationships between hydrocarbons in crude oils that are chemically related via hydrogenation/dehydrogenation reactions suggest that a hydrogen exchange process similar to that demonstrated in laboratory experiments occurs during crude oil formation in sedimentary rocks.     

Annual estimates of water and solute export from 42 tributaries to the Yukon River

Annual export of 11 major and trace solutes for the Yukon River is found to be accurately determined based on summing 42 tributary contributions. These findings provide the first published estimates of tributary specific distribution of solutes within the Yukon River basin. First, we show that annual discharge of the Yukon River can be computed by summing calculated annual discharges from 42 tributaries. Annual discharge for the tributaries is calculated from the basin area and average annual precipitation over that area using a previously published regional regression equation. Based on tributary inputs, we estimate an average annual discharge for the Yukon River of 210 km³ year^–1. This value is within 1% of the average measured annual discharge at the U.S. Geological Survey gaging station near the river terminus at Pilot Station, AK, for water years 2001 through 2005. Next, annual loads for 11 solutes are determined by combining annual discharge with point measurements of solute concentrations in tributary river water. Based on the sum of solutes in tributary water, we find that the Yukon River discharges approximately 33 million metric tons of dissolved solids each year at Pilot Station. Discharged solutes are dominated by cations calcium and magnesium (5.65 × 10⁹ and 1.42 × 10⁹ g year^–1) and anions bicarbonate and sulphate (17.3 × 10⁹ and 5.40 × 10⁹ g year^–1). These loads compare well with loads calculated independently at the three continuous gaging stations along the Yukon River. These findings show how annual solute yields vary throughout a major subarctic river basin and that accurate estimates of total river export can be determined from calculated tributary contributions. Copyright © 2011. This article is a U.S. Government work and is in the public domain in the USA.     

The origin of high-amplitude magnetic anomalies at the intersection of the Juan de Fuca ridge and Blanco fracture zone

The intersection of the Juan de Fuca ridge and Blanco fracture zone is characterized by unusually high amplitude magnetic anomalies (over 1500 nT) which appear to be associated with a body roughly 50 km in length and 20 km in width aligned along the fracture zone. Simple three-dimensional magnetic models indicate that this anomaly is probably caused by a highly magnetized block of material situated in the western end of the Blanco fracture zone near its intersection with the Juan de Fuca ridge. Rock magnetization studies of tholeiitic basalts dredged from this area confirm the presence of highly magnetized basalts near the ridge crest/transform fault intersection. These tholeiitic basalts are enriched in iron and titanium relative to “normal” oceanic tholeiites, apparently the result of extensive shallow fractionation involving olivine, plagioclase, and clinopyroxene. Magnetic model studies indicate that an average thickness of no more than 500 m of these iron-rich basalts is necessary to produce the observed anomaly pattern. Comparison of these basalts with samples previously dredged from the Juan de Fuca ridge crest suggests that these Fe-rich, highly magnetized basalts probably “leaked” out of the southernmost portion of the Juan de Fuca ridge.     

PHYSICAL GEOGRAPHY OF TROPICAL LATIN AMERICA: THE SPATIAL AND TEMPORAL HETEROGENEITY OF ENVIRONMENTS

For the past 40 years, studies of physical geography in tropical Latin America have concentrated on the spatial and temporal diversity of biophysical environments and biota. Environmental heterogeneity arises from historical and present-day interaction between climatic, geomorphologic, edaphic, and biogeographic systems. Recent research emphasizes three major themes involving these systems: Quaternary climate change; human-altered biophysical environments; and geomorphologic activity. Findings on these themes are evaluated with respect to the tropical highlands, the tropical lowlands and related extra-tropical areas. Research on physical geography in Latin America promises numerous contributions toward a better understanding of environmental conservation.     

Copper(II) carbonate complexation in seawater

Cupric carbonate and cupric bicarbonate complexation constants were determined in natural seawater and in a variety of synthetic media. The formation constants of CuHCO₃⁺, CuCO₃⁰ and Cu(CO₃)₂^2? at 25°C and zero ionic strength are: log β_H⁰ = 1.8, log β₁⁰ = 6.82 and log β⁰₂ = 10.6. Formation constants of these species appropriate to 0.7 molar ionic strength and 25°C are log β_H ～- 1, log β₁ = 5.73, log β₂ = 9.3. Our results indicate that the inorganic speciation scheme of Cu(II) in seawater is dominated by CuCO₃⁰ and that the ternary species, CuCO₃OH^?, is of substantial importance.