The Effects of Ocean Acidification on Feeding and Contest Behaviour by the Beadlet Anemone <Emphasis Type="Italic">Actinia equina</Emphasis>

Increasing concentrations of atmospheric carbon dioxide are causing oceanic pH to decline worldwide, a phenomenon termed ocean acidification. Mounting experimental evidence indicates that near-future levels of CO₂ will affect calcareous invertebrates such as corals, molluscs and gastropods, by reducing their scope for calcification. Despite extensive research into ocean acidification in recent years, the effects on non-calcifying anthozoans, such as sea anemones, remain little explored. In Western Europe, intertidal anemones such as Actinia equina are abundant, lower trophic-level organisms that function as important ecosystem engineers. Changes to behaviours of these simple predators could have implications for intertidal assemblages. This investigation identified the effects of reduced seawater pH on feeding and contest behaviour by A. equina. Video footage was recorded for A. equina feeding at current-day seawater (pH 8.1), and the least (pH 7.9) and most (pH 7.6) severe end-of-century predictions. Footage was also taken of contests over ownership of space between anemones exposed to reduced pH and those that were not. No statistically significant differences were identified in feeding duration or various aspects of contest behaviour including initiating, winning, inflating acrorhagi, inflicting acrorhagial peels and contest duration. Multivariate analyses showed no effect of pH on a combination of these variables. This provides contrast with other studies where anemones with symbiotic algae thrive in areas of natural increased acidity. Thus, novel experiments using intraspecific contests and resource-holding potential may prove an effective approach to understand sub-lethal consequences of ocean acidification for A. equina, other sea anemones and more broadly for marine ecosystems.     

The First Solar Seeing Profile Measurement with Two Apertures and Multiple Guide Regions

The sky brightness is a critical parameter for estimating the coronal observation conditions for a solar observatory. As part of a site-survey project in Western China, we measured the sky brightness continuously at the Lijiang Observatory in Yunnan province in 2011. A sky brightness monitor (SBM) was adopted to measure the sky brightness in a region extending from 4.5 to 7.0 apparent solar radii based on the experience of the Daniel K. Inouye Solar Telescope (DKIST) site survey. Every month, the data were collected manually for at least one week. We collected statistics of the sky brightness at four bandpasses located at 450, 530, 890, and 940 nm. The results indicate that aerosol scattering is of great importance for the diurnal variation of the sky brightness. For most of the year, the sky brightness remains under 20 millionths per airmass before local Noon. On average, the sky brightness is less than 20 millionths, which accounts for 40.41% of the total observing time on a clear day. The best observation time is from 9:00 to 13:00 (Beijing time). The Lijiang Observatory is therefore suitable for coronagraphs investigating the structures and dynamics of the corona.     

Experimental impact cratering: A summary of the major results of the MEMIN research unit

This paper reviews major findings of the Multidisciplinary Experimental and Modeling Impact Crater Research Network (MEMIN). MEMIN is a consortium, funded from 2009 till 2017 by the German Research Foundation, and is aimed at investigating impact cratering processes by experimental and modeling approaches. The vision of this network has been to comprehensively quantify impact processes by conducting a strictly controlled experimental campaign at the laboratory scale, together with a multidisciplinary analytical approach. Central to MEMIN has been the use of powerful two-stage light-gas accelerators capable of producing impact craters in the decimeter size range in solid rocks that allowed detailed spatial analyses of petrophysical, structural, and geochemical changes in target rocks and ejecta. In addition, explosive setups, membrane-driven diamond anvil cells, as well as laser irradiation and split Hopkinson pressure bar technologies have been used to study the response of minerals and rocks to shock and dynamic loading as well as high-temperature conditions. We used Seeberger sandstone, Taunus quartzite, Carrara marble, and Weibern tuff as major target rock types. In concert with the experiments we conducted mesoscale numerical simulations of shock wave propagation in heterogeneous rocks resolving the complex response of grains and pores to compressive, shear, and tensile loading and macroscale modeling of crater formation and fracturing. Major results comprise (1) projectile–target interaction, (2) various aspects of shock metamorphism with special focus on low shock pressures and effects of target porosity and water saturation, (3) crater morphologies and cratering efficiencies in various nonporous and porous lithologies, (4) in situ target damage, (5) ejecta dynamics, and (6) geophysical survey of experimental craters.     

Measuring impact crater depth throughout the solar system

One important, almost ubiquitous, tool for understanding the surfaces of solid bodies throughout the solar system is the study of impact craters. While measuring a distribution of crater diameters and locations is an important tool for a wide variety of studies, so too is measuring a crater's “depth.” Depth can inform numerous studies including the strength of a surface and modification rates in the local environment. There is, however, no standard data set, definition, or technique to perform this data-gathering task, and the abundance of different definitions of “depth” and methods for estimating that quantity can lead to misunderstandings in and of the literature. In this review, we describe a wide variety of data sets and methods to analyze those data sets that have been, are currently, or could be used to derive different types of crater depth measurements. We also recommend certain nomenclature in doing so to help standardize practice in the field. We present a review section of all crater depths that have been published on different solar system bodies which shows how the field has evolved through time and how some common assumptions might not be wholly accurate. We conclude with several recommendations for researchers which could help different data sets to be more easily understood and compared.     

Performance results of HESP physical model

As a continuation to the published work on model based calibration technique with HESP(Hanle Echelle Spectrograph) as a case study, in this paper we present the performance results of the technique. We also describe how the open parameters were chosen in the model for optimization, the glass data accuracy and handling the discrepancies. It is observed through simulations that the discrepancies in glass data can be identified but not quantifiable. So having an accurate glass data is important which is possible to obtain from the glass manufacturers. The model’s performance in various aspects is presented using the ThAr calibration frames from HESP during its pre-shipment tests. Accuracy of model predictions and its wave length calibration comparison with conventional empirical fitting, the behaviour of open parameters in optimization, model’s ability to track instrumental drifts in the spectrum and the double fibres performance were discussed. It is observed that the optimized model is able to predict to a high accuracy the drifts in the spectrum from environmental fluctuations. It is also observed that the pattern in the spectral drifts across the 2D spectrum which vary from image to image is predictable with the optimized model. We will also discuss the possible science cases where the model can contribute.     

Snow carrots after the Chelyabinsk event and model implications for highly porous solar system objects

After the catastrophic disruption of the Chelyabinsk meteoroid, small fragments formed funnels in the snow layer covering the ground. We constrain the pre‐impact characteristics of the fragments by simulating their atmospheric descent with the atmospheric entry model. Fragments resulting from catastrophic breakup may lose about 90% of their initial mass due to ablation and reach the snow vertically with a free‐fall velocity in the range of 30–90 m s^?1. The fall time of the fragments is much longer than their cooling time, and, as a consequence, fragments have the same temperature as the lower atmosphere, i.e., of about ?20 °C. Then, we use the shock physics code iSALE to model the penetration of fragments into fluffy snow, the formation of a funnel and a zone of denser snow lining its walls. We examine the influence of several material parameters of snow and present our best‐fit model by comparing funnel depth and funnel wall characteristics with observations. In addition, we suggest a viscous flow approximation to estimate funnel depth dependence on the meteorite mass. We discuss temperature gradient metamorphism as a possible mechanism which allows to fill the funnels with denser snow and to form the observed “snow carrots.” This natural experiment also helps us to calibrate the iSALE code for simulating impacts into highly porous matter in the solar system including tracks in the aerogel catchers of the Stardust mission and possible impact craters on the 67P/Churyumov‐Gerasimenko comet observed recently by the Rosetta mission.     

Origin and transportation history of lunar breccia 14311

In this paper, we compare the U‐Pb zircon age distribution pattern of sample 14311 from the Apollo 14 landing site with those from other breccias collected at the same landing site. Zircons in breccia 14311 show major age peaks at 4340 and 4240 Ma and small peaks at 4110, 4030, and 3960 Ma. The zircon age patterns of breccia 14311 and other Apollo 14 breccias are statistically different suggesting a separate provenance and transportation history for these breccias. This interpretation is supported by different U‐Pb Ca‐phosphate and exposure ages for breccia 14311 (Ca‐phosphate age: 3938 ± 4 Ma, exposure age: ~550–660 Ma) from the other Apollo 14 breccias (Ca‐phosphate age: 3927 ± 2 Ma, compatible with the Imbrium impact, exposure age: ~25–30 Ma). Based on these observations, we consider two hypotheses for the origin and transportation history of sample 14311. (1) Breccia 14311 was formed in the Procellarum KREEP terrane by a 3938 Ma‐old impact and deposited near the future site of the Imbrium basin. The breccia was integrated into the Fra Mauro Formation during the deposition of the Imbrium impact ejecta at 3927 Ma. The zircons were annealed by mare basalt flooding at 3400 Ma at Apollo 14 landing site. Eventually, at approximately 660 Ma, a small and local impact event excavated this sample and it has been at the surface of the Moon since this time. (2) Breccia 14311 was formed by a 3938 Ma‐old impact. The location of the sample is not known at that time but at 3400 Ma, it was located nearby or buried by hot basaltic flows. It was transported from where it was deposited to the Apollo 14 landing site by an impact at approximately 660 Ma, possibly related to the formation of the Copernicus crater and has remained at the surface of the Moon since this event. This latter hypothesis is the simplest scenario for the formation and transportation history of the 14311 breccia.     

Coral assemblages and reef growth in the Commonwealth of the Northern Mariana Islands (Western Pacific Ocean)

Reef development varies considerably around the high, raised‐limestone islands of the Commonwealth of the Northern Mariana Islands (CNMI). Here we examine the modern assemblages at 30 sites for coral composition, colony density, colony size, and fidelity. We defined four reef types and hypothesize the presence of environmentally driven ecological stasis, whereby the environment continuously selects for coral species membership, defines colony sizes, and over time creates the noted reef types. Our results show that constructional spur‐and‐groove reefs supported significantly larger coral‐colony sizes and higher coral species richness compared with high‐relief interstitial framework, low‐relief incipient, and non‐constructional coral assemblages. Non‐constructional reefs supported much smaller coral colony sizes, despite similar population densities, and were consistently found in association with high wave exposure. The distinct coral assemblages found on interstitial framework and low‐relief incipient reefs were not affiliated with any wave exposure regime, but were located adjacent to large watersheds and on islands with unique geological history. These assemblages were nested within the spur‐and‐groove species pool. Overall, modern coral cover was well predicted by bathymetric slope and watershed size, while species richness was additively influenced by two proxies of pollution, suggesting the latter is better suited for establishing management targets. In contrast with previous studies that suggested modern assemblages were biologically controlled in the CNMI, we show reef assemblages and reef development are highly influenced by long‐term environmental forcing.     

Reprint of: Diagenetic controls on evolution of porosity and permeability in lower Tertiary Wilcox sandstones from shallow to ultradeep (200–6700 m) burial,Gulf of Mexico Basin,U.S.A.

Reservoir quality is a critical risk factor in deep to ultradeep reservoirs at depths >4.5 km. Analysis of Paleogene Wilcox sandstones on the upper Texas Gulf Coast provides insight into the evolution of reservoir quality during shallow to ultradeep burial diagenesis. Reduction of porosity and permeability with burial in Wilcox sandstones was evaluated using subsurface samples from 200 to 6700 m, at temperatures of 25–230 °C. Diagenesis and petrophysical properties were interpreted from petrographic data and core analyses. Wilcox sandstones are mostly lithic arkoses and feldspathic litharenites having an average composition of Q₅₉F₂₂R₁₉. Provenance did not change significantly during Wilcox deposition in this area, nor does average sandstone composition vary among lower, middle, and upper Wilcox sandstones. However, composition does vary with sequence-stratigraphic position; lowstand slope-fan deposits contain more rock fragments than do deposits from highstand or transgressive systems tracts. Given observations from this onshore dataset, Wilcox sandstones deposited in deepwater environments in the Gulf of Mexico are likely to contain more rock fragments than their linked highstand equivalents.     

Open-system chemical behavior in deep Wilcox Group mudstones,Texas Gulf Coast,USA

Wilcox Group mudstones have been mechanically and geochemically transformed over a temperature range of 20–200 °C. Our research controlled for provenance and age by sampling from five wells, parallel to the paleodepositional axis, all within the Houston delta system. Across the sampled depths, mudstone porosity has been reduced from ∼25 to <10% and bulk mineralogical change as documented by quantitative X-ray diffraction includes decreases in quartz, K-feldspar and kaolinite content whereas illite + illite − smectite, chlorite, and plagioclase increase. These mineral transformations transfer elements at a scale of less than 1 mm from one mineralogical form to another, however, X-ray fluorescence data suggest that among major elements only Al₂O₃ and TiO₂ are fully conserved within the system (trace-element ZrO₂ is also conserved). K₂O has been added to and SiO₂ released from the Wilcox Group mudstones. Cathodoluminescence and secondary electron imaging did not find this SiO₂ locally precipitated. We, therefore, document an open-system geochemical behavior.