A search for natural or artificial objects located at the Earth-Moon libration points

Photographs in the vicinity of the Earth-Moon triangular libration points L4 and L5, and of the solar-synchronized positions in the associated halo orbits (A. A. Kamel, 1969, Ph.D. dissertation, Stanford University), were made during August–September 1979, using the 30-in Cassegrain telescope at Leuschner Observatory, Lafayette, California. An effective 2° square field was covered at each position. No discrete objects, either natural or artificial, were found. The detection limit was about 14th magnitude. The present work extends traditional SETI observations to include the search for interstellar probes (R. A. Freitas, Jr., 1980a, J. Brit. Interplanet. Soc.33, 95–100).     

Particle transport and distribution on the Mars Science Laboratory mission: Effects of triboelectric charging

We report on the nature of fine particle (<150 μm) transport under simulated martian conditions, in order to better understand the Mars Science Laboratory’s (MSL) sample acquisition, processing and handling subsystem (SA/SPaH). We find that triboelectric charging due to particle movement may have to be controlled in order for successful transport of fines that are created within the drill, processed through the Collection and Handling for In situ Martian Rock Analysis (CHIMRA) sample handing system, and delivered to the Sample Analysis at Mars (SAM) and Chemistry and Mineralogy (CheMin) instruments. These fines will be transferred from the surface material to the portioner, a 3 mm diameter, 8 mm deep distribution center where they will drop ∼2 cm to the instrument inlet funnels. In our experiments, movement of different material including terrestrial analogs and martian soil simulants (Mars Mojave Simulant - MMS) resulted in 1-7 nanocoulombs of charge to build up for several different experimental configurations. When this charging phenomenon occurs, several different results are observed including particle clumping, adherence of material on conductive surfaces, or electrostatic repulsion, which causes like-charged particles to move away from each other. This electrostatic repulsion can sort samples based upon differing size fractions, while adhesion causes particles of different sizes to bind into clods. Identifying these electrostatic effects can help us understand potential bias in the analytical instruments and to define the best operational protocols to collect samples on the surface of Mars.     

Flow and form in rehabilitation of large-river ecosystems: An example from the Lower Missouri River

On large, intensively engineered rivers like the Lower Missouri, the template of the physical habitat is determined by the nearly independent interaction of channel form and flow regime. We evaluated the interaction between flow and form by modeling four combinations of modern and historical channel form and modern and historical flow regimes. The analysis used shallow, slow water (shallow-water habitat, SWH, defined as depths between 0 and 1.5 m, and current velocities between 0 and 0.75 m/s) as an indicator of habitat that has been lost on many intensively engineered rivers and one that is thought to be especially important in rearing of young fishes. Two-dimensional hydrodynamic models for modern and historical channels of the Lower Missouri River at Hermann, Missouri, indicate substantial differences between the two channels in total availability and spatial characteristics of SWH. In the modern channel, SWH is maximized at extremely low flows and in overbank flows, whereas the historical channel had substantially more SWH at all discharges and SWH increased with increasing discharge. The historical channel form produced 3–7 times the SWH area of the modern channel regardless of flow regime. The effect of flow regime is evident in increased within-year SWH variability with the natural flow regime, including significant seasonal peaks of SWH associated with spring flooding. Comparison with other reaches along the Lower Missouri River indicates that a) channel form is the dominant control of the availability of habitat even in reaches where the hydrograph is more intensively altered, and b) rehabilitation projects that move toward the historical condition can be successful in increasing topographic diversity and thereby decreasing sensitivity of the availability of habitat to flow regime. The relative efficacy of managing flow and form in creating SWH is useful information toward achieving socially acceptable rehabilitation of the ecosystem in large river systems.     

Density,porosity, and magnetic susceptibility of carbonaceous chondrites

Abstract– We report physical properties (bulk and grain density, magnetic susceptibility, and porosity) measured using nondestructive and noncontaminating methods for 195 stones from 63 carbonaceous chondrites. Grain densities over the whole population average 3.44 g cm^?3, ranging from 2.42 g cm^?3 (CI1 Orgueil) to 5.66 g cm^?3 (CB Bencubbin). Magnetic susceptibilities (in log units of 10^?9 m³ kg^?1) averaged log χ = 4.22, ranging from 3.23 (CV3 Axtell) to 5.79 (CB Bencubbin). Porosities averaged 17%, ranging from 0 (for a number of meteorites) to 41% (for one stone of the CO Ornans). Notably, we found significant differences in porosity between the oxidized and reduced CV subgroups, with the porosities of CV_o averaging approximately 20% and CV_r porosities approximately 4%. Overall, porosities of carbonaceous chondrite falls trend with petrographic type, from type 1 (CI) near 35%, type 2 (CM, CR) averaging 23%, type 3 (CV, CO) 21%, to type 4 (CK and some CO) averaging 15%. There is also a significant decrease in porosity between meteorites of shock stage S1 and those of S2, indicative of shock compression.     

Performance results of HESP physical model

As a continuation to the published work on model based calibration technique with HESP(Hanle Echelle Spectrograph) as a case study, in this paper we present the performance results of the technique. We also describe how the open parameters were chosen in the model for optimization, the glass data accuracy and handling the discrepancies. It is observed through simulations that the discrepancies in glass data can be identified but not quantifiable. So having an accurate glass data is important which is possible to obtain from the glass manufacturers. The model’s performance in various aspects is presented using the ThAr calibration frames from HESP during its pre-shipment tests. Accuracy of model predictions and its wave length calibration comparison with conventional empirical fitting, the behaviour of open parameters in optimization, model’s ability to track instrumental drifts in the spectrum and the double fibres performance were discussed. It is observed that the optimized model is able to predict to a high accuracy the drifts in the spectrum from environmental fluctuations. It is also observed that the pattern in the spectral drifts across the 2D spectrum which vary from image to image is predictable with the optimized model. We will also discuss the possible science cases where the model can contribute.     

Tidally driven stress accumulation and shear failure of Enceladus's tiger stripes

Straddling the south polar region of Saturn's moon Enceladus, the four principal “tiger stripe” fractures are a likely source of tectonic activity and plume generation. Here we investigate tidally driven stress conditions at the tiger stripe fractures through a combined analysis of shear and normal diurnal tidal stresses and accounting for additional stress at depth due to the overburden pressure. We compute Coulomb failure conditions to assess failure location, timing, and direction (right- vs left-lateral slip) throughout the Enceladus orbital cycle and explore a suite of model parameters that inhibit or promote shear failure at the tiger stripes. We find that low coefficients of friction (μf=0.1-0.2) and shallow overburden depths (z=2-4 km) permit shear failure along the tiger stripe faults, and that right- and/or left-lateral slip responses are possible. We integrate these conditions into a 3D time-dependent fault dislocation model to evaluate tectonic displacements and stress variations at depth during a tiger stripe orbital cycle. Depending on the sequence of stress accumulation and subsequent fault slip, which varies as a function of fault location and orientation, frictional coefficient, and fault depth, we estimate resolved shear stress accumulation of ∼70 kPa prior to fault failure, which produces modeled strike-slip displacements on the order of ∼0.5 m in the horizontal direction and ∼5 mm in the vertical direction per slip event. Our models also indicate that net displacements on the order of 0.1 m per orbital cycle, in both right- and left-lateral directions, are possible for particular fault geometries and frictional parameters. Tectonic activity inferred from these analyses correlates with observed plume activity and temperature anomalies at Enceladus's south polar region. Moreover, these analyses provide important details of stress accumulation and the faulting cycle for icy satellites subjected to diurnal tidal stress.     

Evidence of climatic warming in the southern Urals region derived from borehole temperatures and meteorological data

Thirty borehole temperature–depth profiles in the central and southern Urals, Russia were scrutinized for evidence of ground surface temperature histories. We explored two inversion schemes: a simple ramp inversion in which solutions are parameterized in terms of an onset time and magnitude of change and a more sophisticated functional space inverse algorithm in which the functional form of the solution is left unspecified. To enhance and potentially identify latitudinal differences in the ground surface temperature signal, we subdivided the data into three groups based on geographic proximity and simultaneously inverted the borehole temperature–depth logs. The simultaneous inversions highlighted 13 temperature–depth logs that could not both fit a common ground surface temperature history and a priori models within reasonable bounds. Our results confirm that this is an effective way to reduce site-specific noise from an ensemble of boreholes. Each inversion scheme gives comparable results indicating locally variable warming on the order of 1°C starting between 1800 and 1900 AD. Similarly surface air temperature records from 12 nearby meteorological stations exhibit locally variable warming also on the order of 1°C of warming during the 20th century. To explore the degree to which borehole temperatures and surface air temperature (SAT) time series are responding to the same signal, we average the SAT data into the same three groups and used these averages as a forcing function at the Earth's surface to generate synthetic transient temperature profiles. Root mean square (RMS) misfits between these synthetic temperature profiles and averaged temperature–depth profiles are low, suggesting that first-order curvature in borehole temperatures and variations in SAT records are correlated.     

Adding the missing third and fourth dimensions to trajectory analysis in carbonate systems

We developed a seismic geomorphology-based procedure to enhance traditional trajectory analysis with the ability to visualize and quantify lateral variability along carbonate prograding-margin types (ramps and rimmed shelves) in 3D and 4D. This quantitative approach analysed the shelf break geometric evolution of the Oligo-Miocene carbonate clinoform system in the Browse Basin and delineated the feedback between antecedent topography and carbonate system response as controlling factor on shelf break rugosity. Our geometrical analysis identified a systematic shift in the large-scale average shelf break strike direction over a transect of 10 km from 62° to 55° in the Oligo-Miocene interval of the Browse Basin, which is likely controlled by far-field allogenic forcing from the Timor Trough collision zone. Plotting of 3D shelf break trajectories represents a convenient way to visualize the lateral variability in shelf break evolution. Shelf break trajectories that indicate contemporaneous along-strike progradation and retrogradation correlate with phases of autogenic slope system re-organization and may be a proxy for morphological stability of the shelf break. Shelf break rugosity and shelf break trajectory rugosity are not inherited parameters and antecedent topography does not dictate long-term differential movement of the shelf margin through successive depositional sequences. The autogenic carbonate system response to antecedent topography smooths high-rugosity areas by filling accommodation and maintains a relatively constant shelf break rugosity of ~150 m. Color-coding of the vertical component in the shelf break trajectory captures the creation and filling of accommodation, and highlights areas of the transect that are likely to yield inconsistent 2D sequence stratigraphic interpretations.