The sources of material comprising a mass ejection coronal transient

The origin of the material which is ejected during a white light coronal transient has not been determined heretofore. Study of a disturbance on 26 and 27 August 1973, during which a slowly ascending prominence and a more rapid accompanying coronal transient were simultaneously observed, helps to resolve this question. Prominence images obtained in Hα 6563 Å and in He II 304 Å are nearly identical. The mass ejection transient observed in white light (3700–7000 Å) appeared to be a loop about 1 R_⊙ higher than the top of the ascending prominence; it accelerated away from the prominence below it. These observations imply: (1) the bulk of the ejected material did not originate in the ascending prominence; (2) therefore, most of the material must have come from the low corona above the prominence, (and was at coronal temperatures during its outward passage); and (3) the total event - ascending prominence accompanied by coronal mass ejection - was far larger, more energetic, and longer lasting than would be inferred from the prominence observations alone. The transient of 26–27 August was slow and of atypical shape compared to other mass ejection transients, but we believe that these three conclusions apply to most, if not all, of the more than 60 loop-shaped coronal transients observed by the High Altitude Observatory's coronagraph during the nine-month flight of Skylab.     

Coronal changes associated with a disappearing filament

This paper describes Skylab/ATM observations of the events associated with a disappearing filament near the center of the solar disk on January 18, 1974. As the filament disappeared, the nearby coronal plasma was heated to a temperature in excess of 6 × 10⁶K. A change in the pattern of coronal emission occurred during the 11/3 hr period that the soft X-ray flux was increasing. This change seemed to consist of the formation and apparent expansion of a loop-like coronal structure which remained visible until its passage around the west limb several days later. The time history of the X-ray and microwave radio flux displayed the well-known gradual-rise-and-fall (GRF) signature, suggesting that this January 18 event may have properties characteristic of a wide class of X-ray and radio events.In pursuit of this idea, we examined other spatially-resolved Skylab/ATM observations of long-duration X-ray events to see what characteristics they may have in common. Nineteen similar long-lived SOLRAD X-ray events having either the GRF or post-burst radio classification occurred during the nine-month Skylab mission. Sixteen of these occurred during HAO/ATM coronagraph observations, and 7 of these 16 events occurred during observations with both the NRL/ATM slitless spectrograph and the MSFC-A/ATM X-ray telescope. The tabulation of these events suggests that all long-lived SOLRAD X-ray bursts involve transients in the outer corona and that at least two-thirds of the bursts involve either the eruption or major activation of a prominence. Also, these observations indicate that long-lived SOLARD events are characterized by the appearance of new loops of emission in the lower corona during the declining phase of the X-ray emission. However, sometimes these loops disappear after the X-ray event (like the post-flare loops associated with a sporadic coronal condensation), and sometimes the loops remain indefinitely (like the emission from a permanent coronal condensation).Visiting Scientist, Kitt Peak National Observatory, Tucson, Ariz. 85726, U.S.A. operated by the Association of Universities for Research in Astronomy, Inc., under contract with the National Science Foundation.Presently located at NASA/MSFC, Space Sciences Laboratory, Marshall Space Flight Center, Ala. 35812, U. S.A.     

Transport and emplacement of crater and basin deposits

Material is ejected from impact craters in ballastic trajectories; it impacts first near the crater rim and then at progressively greater ranges. Ejecta from craters smaller than approximately 1 km is laid predominantly on top of the surrounding surface. With increasing crater size, however, more and more surrounding surface will be penetrated by secondary cratering action and these preexisting materials will be mixed with primary crater ejecta. Ejecta from large craters and especially basin forming events not only excavate preexisting, local materials, but also are capable of moving large amounts of material away from the crater. Thus mixing and lateral transport give rise to continuous deposits that contain materials from within and outside the primary crater. As a consequence ejecta of basins and large highland craters have eroded and mixed highland materials throughout geologic time and deposited them in depressions inside and between older crater structures.Because lunar mare surfaces contain few large craters, the mare regolith is built up by successive layers of predominantly primary ejecta. In contrast, the lunar highlands are dominated by the effects of large scale craters formed early in lunar history. These effects lead to thick fragmental deposits which are a mixture of primary crater material and local components. These deposits may also properly be named regolith though the term has been traditionally applied only to the relatively thin fine grained surficial deposit on mare and highland terranes generated during the past few billion year. We believe that the surficial highland regolith - generated over long periods of time - rests on massive fragmental units that have been produced during the early lunar history.     

库姆塔格沙漠"羽毛状沙丘"形态的示量特征

通过卫星照片判读和实地观测,库姆塔格沙漠的“羽毛状沙丘”由两种风沙地貌构成：东北-西南走向的新月形“沙垄”为“羽轴”；垄间分布的波状微起伏的“大沙波”为“羽枝”,“大沙波”与沙垄的夹角为75°～103°。二者组合成类似“羽毛”的风沙地貌。新月形“沙垄”由单个新月形沙丘的前一沙丘的迎风坡与后一沙丘东翼相连构成“沙垄”。组成“沙垄”的新月形沙丘的两翼平均长37．5m,翼间距30～66m,沙丘高3～19m；在所观测区域内,沙丘沙的分选性由南向北变差。新月形“沙垄”长为3～22km,垄间距为1～3km,其问分布浅色和暗色相间的波状微地貌,暗色部分平均宽24．3m,浅色部分的平均宽11．6m。暗色部分表层沙粒的粒径有60%在1．00～0．25mm之间,以暗色矿物为主,而浅色部分表层沙粒的粒径的90%在1．00～0．25mm之间,分选性相对暗色部分较好,以石英等浅色矿物为主。暗色和浅色微地貌成对出现,相对高差约7cm。这种波状微地貌在库姆塔格沙漠中北部重复出现,类似于风沙地貌分类的沙波,暂称其为“大沙波”。     

Diurnal variation in rates of calcification and carbonate sediment dissolution in Florida Bay

Water quality and criculation in Florida Bay (a shallow, subtropical estuary in south Florida) are highly dependent upon the development and evolution of carbonate mud banks distributed throughout the Bay. Predicting the effect of natural and anthropogenic perturbations on carbonate sedimentation requires an understanding of annual, seasonal, and daily variations in the biogenic and inorganic processes affecting carbonate sediment precipitation and dissolution. In this study, net calcification rates were measured over diurnal cycles on 27 d during summer and winter from 1999 to 2003 on mud banks and four representative substrate types located within basins between mud banks. Substrate types that were measured in basins include seagrass beds of sparse and intermediate densityThalassia sp., mud bottom, and hard bottom communities. Changes in total alkalinity were used as a proxy for calcification and dissolution. On 22 d (81%), diurnal variation in rates of net calcification was observed. The highest rates of net carbonate sediment production (or lowest rates of net dissolution) generally occurred during daylight hours and ranged from 2.900 to −0.410 g CaCO₃ m⁻²d⁻¹. The lowest rates of carbonate sediment production (or net sediment dissolution) occurred at night and ranged from 0.210 to −1.900 g CaCO₃ m⁻² night⁻¹. During typical diurnal cycles, dissolution during the night consumed an average of 29% of sediment produced during the day on banks and 68% of sediment produced during the day in basins. Net sediment dissolution also occurred during daylight, but only when there was total cloud cover, high turbidity, or hypersalinity. Diurnal variation in calcification and dissolution in surface waters and surface sediments of Florida Bay is linked to cycling of carbon dioxide through photosynthesis and respiration. Estimation of long-term sediment accumulation rates from diurnal rates of carbonate sediment production measured in this study indicates an overall average accumulation rate for Florida Bay of 8.7 cm 1000 yr⁻¹ and suggests that sediment dissolution plays a more important role than sediment transport in loss of sediment from Florida Bay.     

Fluid sources for the La Guitarra epithermal deposit (Temascaltepec district, Mexico): Volatile and helium isotope analyses in fluid inclusions

The La Guitarra deposit (Temascaltepec district, South-Central Mexico), belongs to the low/intermediate sulfidation epithermal type, has a polymetallic character although it is currently being mined for Ag and Au. The mineralization shows a polyphasic character and formed through several stages and sub-stages (named I, IIA, IIB, IIC, IID, and III). The previous structural, mineralogical, fluid inclusion and stable isotope studies were used to constrain the selection of samples for volatile and helium isotope analyses portrayed in this study. The N₂/Ar overall range obtained from analytical runs on fluid inclusion volatiles, by means of Quadrupole Mass Spectrometry (QMS), is 0 to 2526, and it ranges 0 to 2526 for stage I, 0 to 1264 for stage IIA, 0 to 1369 for stage IIB, 11 to 2401 for stage IIC, 19 to 324 for stage IID, and 0 to 2526 for stage III. These values, combined with the CO₂/CH₄ ratios, and N₂-He-Ar and N₂-CH₄-Ar relationships, suggest the occurrence of fluids from magmatic, crustal, and shallow meteoric sources in the forming epithermal vein deposit. The helium isotope analyses, obtained by means of Noble Gas Mass Spectrometry, display R/Ra average values between 0.5 and 2, pointing to the occurrence of mantle-derived helium that was relatively diluted or “contaminated” by crustal helium. These volatile analyses, when correlated with the stable isotope data from previous works and He isotope data, show the same distribution of data concerning sources for mineralizing fluids, especially those corresponding to magmatic and crustal sources. Thus, the overall geochemical data from mineralizing fluids are revealed as intrinsically consistent when compared to each other.The three main sources for mineralizing fluids (magmatic, and both deep and shallow meteoric fluids) are accountable at any scale, from stages of mineralization down to specific mineral associations. The volatile and helium isotope data obtained in this paper suggest that the precious metal-bearing mineral associations formed after hydrothermal pulses of predominantly oxidized magmatic fluids, and thus it is likely that precious metals were carried by fluids with such origin. Minerals from base-metal sulfide associations record both crustal and magmatic sources for mineralizing fluids, thus suggesting that base metals could be derived from deep leaching of crustal rocks. At the La Guitarra epithermal deposit there is no evidence for an evolution of mineralizing fluids towards any dominant source. Rather than that, volatile analyses in fluid inclusions suggest that this deposit formed as a pulsing hydrothermal system where each pulse or set of pulses accounts for different compositions of mineralizing fluids.The positive correlation between the relative content of magmatic fluids (high N₂/Ar ratios) and H₂S suggests that the necessary sulfur to carry mostly gold as bisulfide complexes came essentially from magmatic sources. Chlorine necessary to carry silver and base metals was found to be abundant in inclusion fluids and although there is no evidence about its source, it is plausible that it may come from magmatic sources as well.     

Temperature and its control of isotope fractionation by a sulfate-reducing bacterium

A synthesis of previous results, which we dub the “standard model,” provides a prediction as to how isotope fractionation during sulfate reduction should respond to physiological variables such as specific rate of sulfate reduction and environmental variables such as substrate availability and temperature. The standard model suggests that isotope fractionation should decrease with increasing specific rates of sulfate reduction (rate per cell). Furthermore, the standard model predicts that low fractionations should be found at both high and low temperatures whereas the highest fractionations should be found in the intermediate temperature range. These fractionation trends are controlled, as a function of temperature, by the balance between the transfer rates of sulfate into and out of the cell and the exchange between the sulfur pools internal to the organism. We test this standard model by conducting experiments on the growth physiology and isotope fractionation, as a function of temperature, by the sulfate-reducing bacterium Desulfovibrio desulfuricans (DSMZ 642). Our results contrast with the “standard model” by showing a positive correlation between specific rates of sulfate reduction and fractionation. Also by contrast with the standard model, we found the highest fractionations at low and high temperatures and the lowest fractionations in the intermediate temperature range. We develop a fractionation model which can be used to explain both our results as well as the results of the “standard model.” Differences in fractionation with temperature relate to differences in the specific temperature response of internal enzyme kinetics as well as the exchange rates of sulfate in and out of the cell. It is expected that the kinetics of these processes will show strain-specific differences.