Reduction of reflections from above surface objects in GPR data

During a ground-penetrating radar (GPR) survey, special attention must be paid to objects located above the earth's surface. Due to the low-loss character of electromagnetic propagation in air and high velocity, above-surface reflections or diffractions can overwhelm subsurface events, making the interpretation a difficult task. The relative sensitivity of reflections and diffractions originating from above-surface objects is a function of the antenna radiation characteristics, the lateral and vertical dimensions of the objects and their position with respect to the antennas. The largest amplitude reflections and diffractions are expected when the polarization of the electric field is parallel to the long-axis of the object. Near the surface in the E-plane, the electric field is vertically polarized and has a larger amplitude than the horizontally polarized electric field in the H-plane. Numerical modeling of reflections from three above surface objects (a vertical plane and elongated horizontal and vertical objects) demonstrate that the largest amplitude difference occurs when an elongated vertical object is present in the E- or H-plane. The calculated reflection from the elongated vertical object present in the E-plane was 21 times larger than when it was present in the H-plane. In 60-m long field data sets, reflections from interfering trees present in the E-plane were at several positions >15 times larger and on average 6 times larger than when the trees were present in the H-plane. These large amplitude differences indicate that appropriate orientation of the antennas can be used to minimize the effects of above-surface reflections and diffractions.     

Atmospheric Disturbances that Generate Intermittent Turbulence in Nocturnal Boundary Layers

Using the unprecedented observational facilities deployed duringthe 1999 Cooperative Atmosphere-Surface Exchange Study (CASES-99),we found three distinct turbulent events on the night of 18October 1999. These events resulted from a density current,solitary wave, and internal gravity wave, respectively. Our studyfocuses on the turbulence intermittency generated by the solitarywave and internal gravity wave, and intermittent turbulenceepisodes associated with pressure change and wind direction shiftsadjacent to the ground. Both the solitary and internal gravitywaves propagated horizontally and downward. During the passage ofboth the solitary and internal gravity waves, local thermal andshear instabilities were generated as cold air was pushed abovewarm air and wind gusts reached to the ground. These thermal andshear instabilities triggered turbulent mixing events. Inaddition, strong vertical acceleration associated with thesolitary wave led to large non-hydrostatic pressure perturbationsthat were positively correlated with temperature. The directionaldifference between the propagation of the internal gravity waveand the ambient flow led to lateral rolls. These episodic studiesdemonstrate that non-local disturbances are responsible for localthermal and shear instabilities, leading to intermittentturbulence in nocturnal boundary layers. The origin of thesenon-local disturbances needs to be understood to improve mesoscalenumerical model performance.     

New constraints on the sources and behavior of neodymium and hafnium in seawater from Pacific Ocean ferromanganese crusts

The behavior of dissolved Hf in the marine environment is not well understood due to the lack of direct seawater measurements of Hf isotopes and the limited number of Hf isotope time-series obtained from ferromanganese crusts. In order to place better constraints on input sources and develop further applications, a combined Nd-Hf isotope time-series study of five Pacific ferromanganese crusts was carried out. The samples cover the past 38 Myr and their locations range from sites at the margin of the ocean to remote areas, sites from previously unstudied North and South Pacific areas, and water depths corresponding to deep and bottom waters.For most of the samples a broad coupling of Nd and Hf isotopes is observed. In the Equatorial Pacific ε_Nd and ε_Hf both decrease with water depth. Similarly, ε_Nd and ε_Hf both increase from the South to the North Pacific. These data indicate that the Hf isotopic composition is, in general terms, a suitable tracer for ocean circulation, since inflow and progressive admixture of bottom water is clearly identifiable.The time-series data indicate that inputs and outputs have been balanced throughout much of the late Cenozoic. A simple box model can constrain the relative importance of potential input sources to the North Pacific. Assuming steady state, the model implies significant contributions of radiogenic Nd and Hf from young circum-Pacific arcs and a subordinate role of dust inputs from the Asian continent for the dissolved Nd and Hf budget of the North Pacific.Some changes in ocean circulation that are clearly recognizable in Nd isotopes do not appear to be reflected by Hf isotopic compositions. At two locations within the Pacific Ocean a decoupling of Nd and Hf isotopes is found, indicating limited potential for Hf isotopes as a stand-alone oceanographic tracer and providing evidence of additional local processes that govern the Hf isotopic composition of deep water masses. In the case of the Southwest Pacific there is evidence that decoupling may have been the result of changes in weathering style related to the buildup of Antarctic glaciation.     

Geochemical characterization, correlation, and optical dating of tephra in alluvial sequences of central western Argentina

The synthesis of paleoclimatic archives provided by loess and alluvial sequences of central Argentina has been hindered by the lack of a cohesive lithostratigraphic framework extending across the Chaco-Pampean plains and catchments of the Rios Desaguadero, Colorado, and Negro. This condition originates in part from the dearth of absolute chronological controls. The occurrence of discrete tephra layers across this region may provide an opportunity to address this deficiency if a tephrochronological framework can be established. The potential of such a project is assessed within the context of a pilot study constrained within alluvial sequences of central western Argentina proximal to potential source vents in the Southern Volcanic Zone. The intersite discrimination and correlation of tephra layers on a geochemical basis is examined, with indirect chronological control for the eruption of each generated by optical dating. Alluvial sediments on either side of each of five tephra units at a type site were dated using the optically stimulated luminescence of fine-silt-sized quartz, thus providing an age control on each tephra (ca. 24,000, 30,000, 32,000, 39,000, and 48,000 yr). The geochemical composition of each tephra was derived. Using these data, tephra layers at other sites in the study area were geochemically analyzed and, in instances of statistical concordance in major oxide structure, correlated to the type site and therefore ascribed ages. This methodology identified a further sixth volcanic event between ca. 24,000 and 30,000 yr not registered by type-site tephras. The extension of this initial tephrochronological framework beyond the alluvial sequences of central western Argentina is encouraged by the occurrence of geochemically distinct tephra verified and dated in this study.     

Rapid assessment of field erosion and sediment transport pathways in cultivated catchments after heavy rainfall events

This paper explores a scale‐adapted erosion mapping method which aims at a rapid assessment of field erosion and sediment transport pathways in catchments up to several square kilometres and compares the results with the output of a well‐known erosion model (LISEM). The mapping method is based on an event‐defined classification scheme of erosion intensity (zero, weak, moderate and strong) that is applied to arable fields, in combination with incision measurements of erosion features for each erosion intensity class on a small sample of fields. Sediment deposition is classified on the basis of quantity indicators and abundance. In addition, relevant conditions and erosion factors are determined for each field. The method was applied to an agricultural catchment (4·2 km²) in the Sundgau (Alsace), after a short but violent thunderstorm in May 2001, to illustrate its potential use and its limitations. The rainfall event led to strong erosion on the arable fields and a muddy flow that caused significant damage in the built‐up area. On the basis of the analyses of the incision measurements in combination with the mapping of erosion intensity classes, total erosion for the catchment was estimated as 15 000 t (an average of about 36 t[sol ]ha). Sediment deposition was found to occur in three major locations: (1) in thalwegs at the interface between maize and downslope winter wheat fields, (2) in downslope headlands where the flow direction suddenly changed due to oriented tillage structures in the perpendicular direction, and (3) the lowest corners of fields which collect all the runoff from the field. Preliminary data analyses suggest that erosion intensity is related to field size and[sol ]or tillage direction and to slope morphology. Model output (LISEM) appeared to depend more strongly on slope gradient than the results obtained with the mapping method. The method yields a database, which can be used as a foundation for conservation strategies in small regions with similar land use and geomorphology. The mapping and modelling methods are compared, and their complementary aspects are highlighted. Copyright © 2005 John Wiley & Sons, Ltd.     

Accuracy assessment of InSAR derived input maps for landslide susceptibility analysis: a case study from the Swiss Alps

In recent years SAR interferometry has become a widely used technique for measuring altitude and displacement of the surface of the earth. Both these capabilities are highly relevant for landslide susceptibility studies. Although there are many problems that make the use of SAR interferometry less suitable for landslide inventory mapping, it’s use in landslide monitoring and in the generation of input maps for landslide susceptibility assessment looks very promising. The present work attempts to evaluate the usefulness and limitations of this technique based on a case study in the Swiss Alps. Input maps were generated from ERS repeat pass data using SAR interferometry. A land cover map has been generated by image classification of multi-temporal SAR intensity images. An InSAR DEM was generated and a number of maps were derived from it, such as slope-, aspect, altitude- and slope form classes. These maps were used to generate landslide and rockfall susceptibility maps, which give fairly well acceptable results. However, a comparison of the InSAR DEM with the conventional Swisstopo DEM, indicated significant errors in the absolute height and slope angles derived from InSAR, especially along the ridges and in the valleys. These errors are caused by low coherence mostly due to layover and shadow effects. Visual comparison of stereo images created from hillshading maps and corresponding DEMs demonstrate that a considerable amount of topographic details have been lost in the InSAR-derived DEM. It is concluded that InSAR derived input maps are not ideal for landslide susceptibility assessment, but could be used if more accurate data is lacking.     

Sr and Pb isotopic composition of five USGS glasses (BHVO-2G, BIR-1G, BCR-2G, TB-1G, NKT-1G)

Sr isotopic compositions and Rb / Sr ratios of three USGS glasses (BHVO-2G, BIR-1G, BCR-2G) are identical to those of the original USGS reference materials. NKT-1G and TB-1G give values of 0.70351 and 0.70558, respectively. Pb isotopic ratios were measured by the standard-sample bracketing technique on an MC-ICP-MS, which give results that are comparable in accuracy and reproducibility to double spike analyses. However, assessment of the reproducibility of the technique is hampered by inhomogeneous contamination of all USGS reference materials analysed. This contamination is likely to be the reason why the USGS glasses do not all have the same Pb isotopic composition as their unfused originals. Powdered glasses, distributed for characterisation of the glasses by bulk analytical techniques, do not all have the same Pb isotopic compositions as the solid glass material, and can therefore not be used for this purpose.