Rate of strike-slip motion on the Amanos Fault (Karasu Valley, southern Turkey) constrained by K–Ar dating and geochemical analysis of Quaternary basalts

The left-lateral Amanos Fault follows a 200-km-long and up to 2-km-high escarpment that bounds the eastern margin of the Amanos mountain range and the western margin of the Karasu Valley in southern Turkey, just east of the northeastern corner of the Mediterranean Sea. Regional kinematic models have reached diverse conclusions as to the role of this fault in accommodating relative motion between either the African and Arabian, Turkish and African, or Turkish and Arabian plates. Local studies have tried to estimate its slip rate by K–Ar dating Quaternary basalts that erupted within the Amanos Mountains, flowed across it into the Karasu Valley, and have since become offset. However, these studies have yielded a wide range of results, ranging from 0.3 to 15 mm a⁻¹, which do not allow the overall role and significance of this fault in accommodating crustal deformation to be determined. We have used the Cassignol K–Ar method to date nine Quaternary basalt samples from the vicinity of the southern part of the Amanos Fault. These basalts exhibit a diverse chemistry, which we interpret as a consequence varying degrees of partial melting of their source combined with variable crustal contamination. This dating allows us to constrain the Quaternary slip rate on the Amanos fault to 1.0 to 1.6 mm a⁻¹. The dramatic discrepancies between past estimates of this slip rate are partly due to technical difficulties in K–Ar dating of young basalts by isotope dilution. In addition, previous studies at the key locality of Hacılar have unwittingly dated different, chemically distinct, flow units of different ages that are juxtaposed. This low slip rate indicates that, at present, the Amanos Fault takes up a small proportion of the relative motion between the African and Arabian plates, which is transferred southward to the Dead Sea Fault Zone. It also provides strong evidence against the long-standing view that its slip continues offshore to the southwest along a hypothetical left-lateral fault zone located south of Cyprus.     

The Quaternary evolution of the Gulf of Corinth, central Greece: coupling between surface processes and flow in the lower continental crust

The Gulf of Corinth in central Greece is an active normal fault zone with particularly clear evidence of isostatic footwall uplift, constrained by Quaternary marine terraces, and hanging-wall subsidence and sedimentation. It is bounded to the south by a Pliocene to Early Pleistocene sedimentary basin, which is now eroding into the Gulf. Previous work has suggested that the relief across this region has increased dramatically since the Early Pleistocene, due to the isostatic response to increased rates of footwall erosion and hanging-wall sedimentation. It is indeed assumed here that incision accompanying the draw-down of global sea-level at 0.9 Ma, during the first major Pleistocene glaciation, initiated the erosion of the basin south of the Gulf of Corinth and so abruptly increased the sedimentation rate in the Gulf. The resulting transient thermal and isostatic response to these changes is modelled, with the subsiding depocentre and eroding sediment source coupled by flow in the lower continental crust. The subsequent enhancement of relief, involving an increase in bathymetry from near zero to 900 m and 500 m of uplift of the eroding land surface in the sediment source, is shown to be a direct consequence of this change. The model is sensitive to the effective viscosity of the lower crust, and can thus resolve this parameter by matching observations. A value of 6×10¹⁹ Pa s is indicated, suggesting a viscosity at the Moho no greater than 10¹⁸ Pa s. Similar transient topographic effects caused by increased rates of sedimentation and erosion are likely to be widespread within the geological record, suggesting that this coupling process involving flow in the weak lower crust may be of major geological and geomorphological importance.     

Evidence for compressionally induced high subsidence rates in the Kurile Basin (Okhotsk Sea)

A combined volcanological, geochemical, paleo-oceanological, geochronological and geophysical study was undertaken on the Kurile Basin, in order to constrain the origin and evolution of this basin. Very high rates of subsidence were determined for the northeastern floor and margin of the Kurile Basin. Dredged volcanic samples from the Geophysicist Seamount, which were formed under subaerial or shallow water conditions but are presently located at depths in excess of 2300 m, were dated at 0.84±0.06 and 1.07±0.04 Ma with the laser ⁴⁰Ar/³⁹Ar single crystal method, yielding a minimum average subsidence rate of 1.6 mm/year for the northeast basin floor in the Quaternary. Trace element and Sr–Nd–Pb isotope data from the volcanic rocks show evidence for contamination within lower continental crust and/or the subcontinental lithospheric mantle, indicating that the basement presently at 6-km depth is likely to represent thinned continental crust. Average subsidence rates of 0.5–2.0 mm/year were estimated for the northeastern slope of the Kurile Basin during the Pliocene and Quaternary through the determination of the age and paleo-environment (depth) of formation of sediments from a canyon wall. Taken together, the data from the northeastern part of the Kurile Basin indicate that subsidence began in or prior to the Early Pliocene and that subsidence rates have increased in the Quaternary. Similar rates of subsidence have been obtained from published studies on the Sakhalin Shelf and Slope and from volcanoes in the rear of the Kurile Arc. The recent stress field of the Kurile Basin is inferred from the analysis of seismic activity, focal mechanism solutions and from the structure of the sedimentary cover and of the Alaid back-arc volcano. Integration of these results suggests that compression is responsible for the rapid subsidence of the Kurile Basin and that subsidence may be an important step in the transition from basin formation to its destruction. The compression of the Kurile Basin results from squeezing of the Okhotsk Plate between four major plates: the Pacific, North American, Eurasian and Amur. We predict that continued compression could lead to subduction of the Kurile Basin floor beneath Hokkaido and the Kurile Arc in the future and thus to basin closure.     

Burial of redox-sensitive metals and organic matter in the equatorial Indian Ocean linked to precession

Authigenic metals (uranium, cadmium, and molybdenum), organic carbon (OC) and total C₃₇ alkenone (totC₃₇) concentrations were measured for the last 350 kyr in core MD900963, located in the eastern equatorial Arabian Sea. Authigenic metal concentrations on a carbonate-free basis range between 1 and 17 ppm, 0.5 and 6 ppm, and 0.5 and 4 ppm for U, Cd, and Mo, respectively. The profiles are characterized by well-defined 23 kyr cycles between oxic and mildly suboxic conditions. The redox-sensitive metal profiles also follow variations in the concentrations of OC (0.2-0.9%) and alkenones (0.2-6.7 ppm). The coupled variations in inorganic and organic constituents are attributed to a 23-kyr cycle in primary production above site MD900963, as suggested by clear correlations with independent micropaleontologic proxies (primary productivity indices based on foraminifera and coccoliths and fragmentation of foraminiferal shells). The 23-kyr cycles do appear to be primarily driven by productivity rather than changes in bottom water oxygen. Comparison with other records indicates that if this interpretation is correct, productivity variations across much of the Indian Ocean have been dominated by precessional forcing, with high productivity in phase with low summer insolation in the Northern Hemisphere. This interpretation contrasts with the traditional attribution of enhanced productivity in the Indian Ocean with periods of high summer insolation.     

Seismic buffer recognition using wavelet-based features and neural classification

One of the first operations in a seismic signal processing system applied to earthquake data is to distinguish between valid and invalid records. Since valid signals are characterized by a combination of their time and frequency properties, wavelets are natural candidates for describing seismic features in a compact way. This paper develops a seismic buffer pattern recognition technique, comprising wavelet-based feature extraction, feature selection based on the mutual information criterion, and neural classification based on feedforward networks. The ability of the wavelet transform to capture discriminating information from seismic data in a small number of features is compared with alternative feature reduction techniques, including statistical moments. Three different variations of the wavelet transform are used to extract features: the discrete wavelet transform, the single wavelet transform and the continuous wavelet transform. The mutual information criterion is employed to select a relatively small set of wavelets from the time–frequency grid. Firstly, it is determined whether wavelets can capture more informative data in an equal number of features compared with other features derived from raw data. Secondly, wavelet-based features are compared with features selected based on prior knowledge of class differences. Thirdly, a technique is developed to optimize wavelet features as part of the neural network training process, by using the wavelet neural network architecture. The automated classification techniques developed in this paper are shown to perform similarly to human operators trained for this function. Wavelet-based techniques are found to be useful, both for preprocessing of the raw data and for extracting features from the data. It is demonstrated that the definition of wavelet features can be optimized using the classification wavelet network architecture.     

Competitive Adjustment and Advancement in Global Commodity Chains II: The Case of the Singapore Garment Industry

This is the second part of a contribution to the debate on the possibilities of leveraging economic globalisation — through incorporation in international production networks and global commodity chains (GCCs) — as a strategy for developing countries to industrialise and advance their position in the world economy. In the first part, we analysed the experience of the East Asian apparel industry and addressed the issues of sustaining positions, upgrading to more rewarding roles, and advancing to less dependent positions within production networks and GCCs. We developed an analytical framework at both the firm and industry levels, and subsequently identified alternative firm- and industry-level strategies and trajectories. The present paper deals with these issues in the context of the Singapore apparel industry. Based on extensive empirical research, we demonstrate that although the East Asian experience of upgrading and repositioning within the GCC is to some extent emulated in the case of the Singapore apparel industry, the outcomes have been less favourable in terms of the depth, extent and strength of these trajectories. The differing outcomes can be explained in terms of different (systemic) conditions in the Singapore business environment, including the agency of local players, the geography of sourcing networks, and the role of the state and prevailing business attitudes. Our conclusions merit continued attention in both research and policy circles on the development of capabilities at the firm level, and the role of local business and institutional environments in local industry development processes under globalisation.     

The RGS, exploration and Empire and the contested nature of surveying

In 1879, the RGS started courses in practical surveying based on the methods used by navigators. Subsequently, RGS courses, increasingly under the influence of former members of the Survey of India, changed in character. At the same time as the nature of appropriate surveying was being negotiated within the RGS, the debate over the academic nature of geography also took shape. The development of the 'new' geography reflected the conflicts within the RGS Council over the meaning of scientific geography.