Effect of Surface Heterogeneity on the Boundary-Layer Height: A Case Study at a Semi-Arid Forest

We investigate the effects of an isolated meso-\(\gamma \)-scale surface heterogeneity for roughness and albedo on the atmospheric boundary-layer (ABL) height, with a case study at a semi-arid forest surrounded by sparse shrubland (forest area: \(28~\text{ km }^2\), forest length in the main wind direction: 7 km). Doppler lidar and ceilometer measurements at this semi-arid forest show an increase in the ABL height over the forest compared with the shrubland on four out of eight days. The differences in the ABL height between shrubland and forest are explained for all days with a model that assumes a linear growth of the internal boundary layer of the forest through the convective ABL upwind of the forest followed by a square-root growth into the stable free atmosphere. For the environmental conditions that existed during our measurements, the increase in ABL height due to large sensible heat fluxes from the forest (\(600~\text {W~m}^{-2}\) in summer) is subdued by stable stratification in the free atmosphere above the ABL, or reduced by high wind speeds in the mixed layer.     

Discrete models for vertical vibrations of surface and embedded foundations

A five-parameter discrete model that approximates the dynamic force4isplacement relationship for rigid foundations undergoing vertical vibrations on a uniform elastic half-space is presented. The model involves a combination of two springs, two viscous dampers and a mass. Values of the parameters for circular, square and rectangular foundations placed on the surface or embedded in an elastic half-space are listed. The parameters are obtained by minimizing the discrepancy between the force4isplacement relation for the model and that obtained by solution of the mixed boundary-value problem of the rigid foundation on an elastic half-space. The definition of an appropriate input motion to represent wave excitation is also discussed. The input motion to the discrete model differs from the input motion that should be used in a continuum model.     

Meteorological microseisms and stratospheric warmings

Summary The meteorological microseisms recorded at Prague are found to be essentially independent of the occurrence of the major midwinter stratospheric warmings. This finding contributes to studying the downward propagation mechanism of some extraterrestrial influences.     

Numerical modeling of nonlinear water waves over heterogeneous porous beds

The transformation of nonlinear water waves over porous beds is studied by applying a numerical model based on Chen's [2006. Fully nonlinear Boussinesq-type equations for waves and currents over porous beds. Journal of Engineering Mechanics, 132:2, 220–230] Boussinesq-type equations for highly nonlinear waves on permeable beds. The numerical model uses a high-order time-marching solution and fourth-order finite-difference schemes for discretization of first-order spatial derivatives to obtain a computational accuracy consistent with the model equations. By forcing the wave celerity and spatial porous-damping rate of the linearized model to match the exact linear theory for horizontal porous bed over a prescribed range of relative depths, the values of the model parameters are optimally determined. Numerical simulations of the damped wave propagation over finite-thickness porous layer demonstrate the accuracy of both the numerical model and governing equations, which have been shown by prior theoretical analyses to be accurate for both nominal and thick porous layers. These simulations also elucidate on the significance of the higher-order porous-damping terms and the influence of the hydraulic parameters. Application of the model to the simulation of the wave field around a laboratory-scale submerged porous mound provides a measure of its capability, as well as useful insight into the scaling of the porous-resistance coefficients. For application to heterogeneous porous beds, the assumption of weak spatial variation of the porous resistance is examined using truncated forms of the governing equations. The results indicate that the complete set of Boussinesq-type equations is applicable to porous beds of nonhomogeneous makeup.     

The submarine volcano of Capelinhos and the tectonics of the Azores

Bulletin of Volcanology - In another paper of the author, a picture of the tectonics of the Azores was presented. The morphological analysis showed evidence of a folded and faulted structure and...     

Crustal and upper mantle structures of the brazilian coast

The Rayleigh wave phase and group velocities in the period range of 24–39 sec, obtained from two earthquakes which occurred in northeastern brazil and which were recorded by the Brazilian seismological station RDJ (Rio de Janeiro), have been used to study crustal and upper mantle structures of the Brazilian coastal region. Three crustal and upper mantle models have been tried out to explain crustal and upper mantle structures of the region. The upper crust has not been resolved, due basically to the narrow period range of the phase and group velocities data. The phase velocity inversions have exhibited good resolutions for both lower crust and upper mantle, with shear wave velocities characteristic of these regions. The group velocity data inversions for these models have showed good results only for the lower crust. The shear wave velocities of the lower crust (3.86 and 3.89 km/sec), obtained with phase velocity inversions, are similar to that (=3.89 km/sec) found byHwang (1985) to the eastern South American region, while group velocity inversions have presented shear velocity (=3.75 km/sec) similar to that (=3.78 km/sec) found byLazcano (1972) to the Brazilian shield. It was not possible to define sharply the crust-mantle transition, but an analysis of the phase and group velocity inversions results has indicated that the total thickness of the crust should be between 30 and 39 km. The crustal and upper mantle model, obtained with phase velocity inversion, can be used as a preliminary model for the Brazilian coast.     

Physical model for dynamic analysis of structures with FPS isolators

This article presents a physical model for frictional pendulum isolators (FPS) that is ready to be implemented in most commercial software. The model is capable of accounting for effects such as large deformations, sticking, and uplift and impact by sensing the normal loads in the isolators through a gap element. Sticking has been incorporated into the model by extending the Park–Wen hysteretic model to the case of large deformations. The proposed model has been tested against a theoretically ‘exact’ formulation leading to essentially identical results. To facilitate its use, the physical FPS model has been cast into a typical non‐linear structural element format, i.e. with deformation as input and restoring force as output. Examples of a building and a bridge have been chosen to show the potential of the element and to provide further insight into the earthquake response of structures with FPS isolators; in particular, in aspects such as the orientation in placement of the isolator, sticking, P? Δ, and other large deformation effects. Copyright © 2003 John Wiley & Sons, Ltd.     

通辽CK－9井水位动态及影响因素的分析

本文在对通辽ＣＫ－９井、水文地质条件和水动态特征初步分析的基础上，采用ＰＣ－１５００计算机，对该井的观测数据与气压、蒸发、降雨、开采、河水位、固体潮、地震波和潜水位等相互关系，进行了定量的相互分析．研究所得结果，对该井水位动态变化和影响因素的关系，提出了新的结论．     

北羌塘盆地中部上侏罗统研究新进展

北羌塘盆地腹地自然条件恶劣 ,地层研究难度极大。经在北羌塘盆地腹地东湖、河湾山、长水河及半岛湖等地进行了详细的岩石地层及生物地层研究工作 ,依据岩石特征和生物化石特征 ,将上侏罗统二分 :下部灰岩层为索瓦组 ,含 L acunosella triobatiformis- Pentithyris vulgaris、Radulopecten fibrosus- Gervillella aviculoides组合 ,其时限为牛津期 ;上部灰岩、碎屑岩互层为白龙冰河组 ,具 Radulopecten scarburgensis、R.moondanensis、Cladophylliaqeibulaensis、Stylosmilia chaputi化石 ,其主体时限为基默里奇期—提塘期 ,顶部可能跨入早白垩世。白龙冰河组的确立 ,是北羌塘盆地上侏罗统岩石地层与生物地层研究上一个新进展