MELTWATER FLUXES AT AN ARCTIC FOREST-TUNDRA SITE

Models of surface energy balance and snow metamorphism are utilized to predict the energy and meltwater fluxes at an Arctic site in the forest–tundra transition zone of north-western Canada. The surface energy balance during the melt period is modelled using an hourly bulk aerodynamic approach. Once a snowcover becomes patchy, advection from the bare patches to the snow-covered areas results in a large spatial variation in basin snowmelt. In order to illustrate the importance of small-scale, horizontal advection, a simple parameterization scheme using sensible heat fluxes from snow free areas was tested. This scheme estimates the maximum horizontal advection of sensible heat from the bare patches to the snow-covered areas. Calculated melt was routed through the measured snowcover in each landscape type using a variable flow path, meltwater percolation model. This allowed the determination of the spatial variability in the timing and magnitude of meltwater release for runoff. Model results indicate that the initial release of meltwater first occurred on the shallow upland tundra sites, but meltwater release did not occur until nearly two weeks later on the deep drift snowcovers. During these early periods of melt, not all meltwater is available for runoff. Instead, there is a period when some snowpacks are only partially contributing to runoff, and the spatial variation of runoff contribution corresponds to landscape type. Comparisons of melt with and without advection suggests that advection is an important process controlling the timing of basin snowmelt.     

2060 Chiron back to a minimum of brightness

The results of photometric observations of comet/asteroid 2060 Chiron at the Observatório do Pico dos Dias (Brazil-OPD) and the Observatoire de Haute-Provence (France-OHP) during 1994 and 1995 are presented. The analysis of the data shows a decrease of 2060 Chiron brightness from its peak values of 1988–1991. The absolute magnitude, H_v, varies from a maximum of 6.6 in February 1994 up to a minimum of 6.8 in June 1995. Therefore 2060 Chiron is back to a minimum of activity close to that of 1983–1985. The slope parameter G is found to be G = 0.71 ± 0.15. It is suggested that the H-G magnitude system, generally adopted to present 2060 Chiron brightness, is not the most appropriate due to the cometary activity of this object.     

Sulfuric Acid Production on Europa: The Radiolysis of Sulfur in Water Ice

Europa's surface is chemically altered by radiolysis from energetic charged particle bombardment. It has been suggested that hydrated sulfuric acid (H₂SO₄·nH₂O) is a major surface species and is part of a radiolytic sulfur cycle, where a dynamic equilibrium exists between continuous production and destruction of sulfur polymers S_x, sulfur dioxide SO₂, hydrogen sulfide H₂S, and H₂SO₄·nH₂O. We measured the rate of sulfate anion production for cyclo-octal sulfur grains in frozen water at temperatures, energies, and dose rates appropriate for Europa using energetic electrons. The measured rate is G_Mixture(SO₄²⁻)=f_Sulfur (r₀/r)^βG₁ molecules (100 eV)⁻¹, where f_Sulfur is the sulfur weight fraction, r is the grain radius, r₀=50 μm, β≈1.9, and G₁=0.4±0.1. Equilibrium column densities N are derived for Europa's surface and follow the ordering N(H₂SO₄) » N(S)>N(SO₂)>N(H₂S). The lifetime of a sulfur atom on Europa's surface for radiolysis to H₂SO₄ is τ(−S)=120(r/r₀)^β years. Rapid radiolytic processing hides the identity of the original source of the sulfurous material, but Iogenic plasma ion implantation and an acidic or salty ocean are candidate sources. Sulfate salts, if present, would be decomposed in <3800 years and be rapidly assimilated into the sulfur cycle.     

On molecules in sunspots

Spectra of umbrae of several sunspots in the wavelength region 4000–8000 Å scanned photoelectrically at the Göttingen Locarno Observatory were used in order to search for absorption lines of molecules. Several thousands of lines of known molecules were reidentifled (see Table II and Table III). Newly identified molecules are CoH, NiH and H₂O (see Table IV and Wöhl (1969a)). The Zeemann effect on molecular lines (of MgH and CaH; see Table V and Wöhl (1969b)) in spectra of umbrae was detected.     

Spectral development of a solar X-ray burst observed on OSO-7

The UCSD solar X-ray instrument on the OSO-7 satellite observes X-ray bursts in the 2–300 keV range with 10.24 s time resolution. Spectra obtained from the proportional counter and scintillation counter are analyzed for the event of November 16, 1971, at 0519 UT in terms of thermal (exponential spectrum) and non-thermal (power law) components. The energy content of the approximately 20 × 10⁶K thermal plasma increased with the 60 s duration hard X-ray burst which entirely preceded the 5 keV soft X-ray maximum. If the hard X-rays arise by thick target bremsstrahlung, the nonthermal electrons above 10 keV have sufficient energy to heat the thermally emitting plasma. In the thin target case the collisional energy transfer from non-thermal electrons suffices if the power law electron spectrum is extrapolated below 10 keV, or if the ambient plasma density exceeds 4 × 10¹⁰ cm^–3.Formerly at UCSD.     

A current ribbon model for energy storage and release with application to the flare of 7 January 1992

Observations of the flare on 7 January 1992 are interpreted using a topological model of the magnetic field. The model, developed here, applies a theory of three-dimensional reconnection to the inferred magnetic field configuration for 7 January. In the model field a new bipole ( 10²¹ Mx) emerges amidst pre-existing active region flux. This emergence gives rise to two current ribbons along the boundaries (separators) separating the distinct, new and old, flux systems. Sudden reconnection across these boundary curves transfers 3 ×10²⁰ Mx of flux from the bipole into the surrounding flux. The model also predicts the simultaneous (sympathetic) flaring of the two current ribbons. This explains the complex two-loop structure noted in previous observations of this flare. We subject the model predictions to comparisons with observations of the flare. The locations of current ribbons in the model correspond closely with those of observed soft X-ray loops. In addition the footpoints and apexes of the ribbons correspond with observed sources of microwave and hard X-ray emission. The magnitude of energy stored by the current ribbons compares favorably to the inferred energy content of accelerated electrons in the flare.     

Heights of formation of non-magnetic solar lines suitable for velocity studies

Heights of formation of lines that do not exhibit Zeeman splitting are calculated using an LTE, partial non-LTE, and full non-LTE approach. Non-magnetic (g=0) lines are valuable for velocity investigations in quiet-Sun magnetic field regions, and a knowledge of their formation heights is useful for obtaining three dimensional velocity profiles in these regions. Presently at Sacramento Peak Observatory. Operated by the Association of Universities for Research in Astronomy, Inc., under contract with the National Science Foundation.     

The stellar content of a spiral arm of NGC 4321

The effects of the passage of a spiral arm through the disc of the giant Virgo Sc galaxy NGC 4321 are investigated with Hubble Space Telescope WFPC2 images in two colours. Concentrating on a portion of the southern spiral arm of NGC 4321, we have applied a new program to solve for the star formation histories in the arm and interarm regions separately. The observational uncertainties and the variable crowding across the spiral arm are taken into account using the results of artificial star tests. In the interarm regions the data are consistent with a constant star formation rate for the last 50 Myr while the stars in the arm region show a star formation rate four times larger than in the interarm regions in the last 5 Myr.     

Shock metamorphism of quartz in nature and experiment: II. Significance in geoscience*

Abstract— The occurrence of shock metamorphosed quartz is the most common petrographic criterion for the identification of terrestrial impact structures and lithologies. Its utility is due to its almost ubiquitous occurrence in terrestrial rocks, its overall stability and the fact that a variety of shock metamorphic effects, occurring over a range of shock pressures, have been well documented. These shock effects have been generally duplicated in shock recovery experiments and, thus, serve as shock pressure barometers. After reviewing the general character of shock effects in quartz, the differences between experimental and natural shock events and their potential effects on the shock metamorphism of quartz are explored. The short pulse lengths in experiments may account for the difficulty in synthesizing the high-pressure polymorphs, coesite and stishovite, compared to natural occurrences. In addition, post-shock thermal effects are possible in natural events, which can affect shock altered physical properties, such as refractive index, and cause annealing of shock damage and recrystallization. The orientations of planar microstructures, however, are unaffected by post-impact thermal events, except if quartz is recrystallized, and provide the best natural shock barometer in terms of utility and occurrence. The nature of planar microstructures, particularly planar deformation features (PDFs), is discussed in some detail and a scheme of variations in orientations with shock pressure is provided. The effect of post-impact events on PDFs is generally limited to annealing of the original glass lamellae to produce decorated PDFs, resulting from the exsolution of dissolved water during recrystallization. Basal (0001) PDFs differ from other PDF orientations in that they are multiple, mechanical Brazil twins, which are difficult to detect if not partially annealed and decorated. The occurrence and significance of shock metamorphosed quartz and its other phases (namely, coesite, stishovite, diaplectic glass and lechatelierite) are discussed for terrestrial impact structures in both crystalline (non-porous) and sedimentary (porous) targets. The bulk of past studies have dealt with crystalline targets, where variations in recorded shock pressure in quartz have been used to constrain aspects of the cratering process and to estimate crater dimensions at eroded structures. In sedimentary targets, the effect of pore space results in an inhomogeneous distribution in recorded shock pressure and temperature, which requires a different classification scheme for the variation of recorded shock compared to that in crystalline targets. This is discussed, along with examples of variations in the relative abundances of planar microstructures and their orientations, which are attributed to textural variations in sedimentary target rocks. Examples of the shock metamorphism of quartz in distal ejecta, such as at the K/T boundary, and from nuclear explosions are illustrated and are equivalent to that of known impact structures, except with respect to characteristics that are due to long-term, post-shock thermal effects. Finally, the differences between the deformation and phase transformation of quartz by shock and by endogenic, tectonic and volcanic processes are discussed. We confirm previous conclusions that they are completely dissimilar in character, due to the vastly different physical conditions and time scales typical for shock events, compared to tectonic and volcanic events. Well-characterized and documented shock effects in quartz are unequivocal indicators of impact in the natural environment.