Effects of rainfall,overland flow and their interactions on peatland interrill erosion processes

Interrill erosion processes on gentle slopes are affected by mechanisms of raindrop impact, overland flow and their interaction. However, limited experimental work has been conducted to understand how important each of the mechanisms are and how they interact, in particular for peat soil. Laboratory simulation experiments were conducted on peat blocks under two slopes (2.5° and 7.5°) and three treatments: Rainfall, where rainfall with an intensity of 12 mm h^?1 was simulated; Inflow, where upslope overland flow at a rate of 12 mm h^?1 was applied; and Rainfall + Inflow which combined both Rainfall and Inflow. Overland flow, sediment loss and overland flow velocity data were collected and splash cups were used to measure the mass of sediment detached by raindrops. Raindrop impact was found to reduce overland flow by 10 to 13%, due to increased infiltration, and reduce erosion by 47% on average for both slope gradients. Raindrop impact also reduced flow velocity (80–92%) and increased roughness (72–78%). The interaction between rainfall and flow was found to significantly reduce sediment concentrations (73–85%). Slope gradient had only a minor effect on overland flow and sediment yield. Significantly higher flow velocities and sediment yields were observed under the Rainfall + Inflow treatment compared to the Rainfall treatment. On average, upslope inflow was found to increase erosion by 36%. These results indicate that overland flow and erosion processes on peat hillslopes are affected by upslope inflow. There was no significant relationship between interrill erosion and overland flow, whereas stream power had a strong relationship with erosion. These findings help improve our understanding of the importance of interrill erosion processes on peat. Copyright © 2017 John Wiley & Sons, Ltd.     

Paragenesis and geochemistry of ore minerals in the epizonal gold deposits of the Yangshan gold belt,West Qinling,China

Six epizonal gold deposits in the 30-km-long Yangshan gold belt, Gansu Province are estimated to contain more than 300 t of gold at an average grade of 4.76 g/t and thus define one of China's largest gold resources. Detailed paragenetic studies have recognized five stages of sulfide mineral precipitation in the deposits of the belt. Syngenetic/diagenetic pyrite (Py₀) has a framboidal or colloform texture and is disseminated in the metasedimentary host rocks. Early hydrothermal pyrite (Py₁) in quartz veins is disseminated in metasedimentary rocks and dikes and also occurs as semi-massive pyrite aggregates or bedding-parallel pyrite bands in phyllite. The main ore stage pyrite (Py₂) commonly overgrows Py₁ and is typically associated with main ore stage arsenopyrite (Apy₂). Late ore stage pyrite (Py₃), arsenopyrite (Apy₃), and stibnite occur in quartz ± calcite veins or are disseminated in country rocks. Post-ore stage pyrite (Py₄) occurs in quartz ± calcite veins that cut all earlier formed mineralization. Electron probe microanalyses and laser ablation-inductively coupled plasma mass spectrometry analyses reveal that different generations of sulfides have characteristic of major and trace element patterns, which can be used as a proxy for the distinct hydrothermal events. Syngenetic/diagenetic pyrite has high concentrations of As, Au, Bi, Co, Cu, Mn, Ni, Pb, Sb, and Zn. The Py₀ also retains a sedimentary Co/Ni ratio, which is distinct from hydrothermal ore-related pyrite. Early hydrothermal Py₁ has high contents of Ag, As, Au, Bi, Cu, Fe, Sb, and V, and it reflects elevated levels of these elements in the earliest mineralizing metamorphic fluids. The main ore stage Py₂ has a very high content of As (median value of 2.96 wt%) and Au (median value of 47.5 ppm) and slightly elevated Cu, but relatively low values for other trace elements. Arsenic in the main ore stage Py₂ occurs in solid solution. Late ore stage Py₃, formed coevally with stibnite, contains relatively high As (median value of 1.44 wt%), Au, Fe, Mn, Mo, Sb, and Zn and low Bi, Co, Ni, and Pb. The main ore stage Apy₂, compared to late ore stage arsenopyrite, is relatively enriched in As, whereas the later Apy₃ has high concentrations of S, Fe, and Sb, which is consistent with element patterns in associated main and late ore stage pyrite generations. Compared with pyrite from other stages, the post-ore stage Py₄ has relatively low concentrations of Fe and S, whereas As remains elevated (2.05～3.20 wt%), which could be interpreted by the substitution of As^? for S in the pyrite structure. These results suggest that syngenetic/diagenetic pyrite is the main metal source for the Yangshan gold deposits where such pyrite was metamorphosed at depth below presently exposed levels. The ore-forming elements were concentrated into the hydrothermal fluids during metamorphic devolatilization, and subsequently, during extensive fluid–rock interaction at shallower levels, these elements were precipitated via widespread sulfidation during the main ore stage.     

Simulating Stable Isotope Ratios in Plumes of Groundwater Pollutants with BIOSCREEN‐AT‐ISO

BIOSCREEN is a well‐known simple tool for evaluating the transport of dissolved contaminants in groundwater, ideal for rapid screening and teaching. This work extends the BIOSCREEN model for the calculation of stable isotope ratios in contaminants. A three‐dimensional exact solution of the reactive transport from a patch source, accounting for fractionation by first‐order decay and/or sorption, is used. The results match those from a previously published isotope model but are much simpler to obtain. Two different isotopes may be computed, and dual isotope plots can be viewed. The dual isotope assessment is a rapidly emerging new approach for identifying process mechanisms in aquifers. Furthermore, deviations of isotope ratios at specific reactive positions with respect to “bulk” ratios in the whole compound can be simulated. This model is named BIOSCREEN‐AT‐ISO and will be downloadable from the journal homepage.     

2006年国家自然科学基金批准项目一览表(地球科学部分)

~~2006年国家自然科学基金批准项目一览表(地球科学部分)~~     

The lithification and metamorphism of lunar breccias

Experimental data have been used to establish the temperature coordinates for Warner's [1] scale of lunar metamorphic grades. A model of an ejecta blanket with a hot base layer overlain by a cold top layer can produce the observed features of the Apollo 14 breccias. The breccia formation process probably encompassed temperatures between 700°C and at least 1100°C and was a reasonably rapid process (hours to days).     

Monochromatic observations of a coronal loop

An isophotal map of a small coronal loop, obtained from a coronagraph observation through a solid Fabry-Perot interferometer, is used to estimate the variation of emission per unit volume and the pressure gradient at the top and sides of the loop. The magnitude of the magnetic field necessary to maintain the estimated pressure gradients is found to be ¦H ²¦ = 30 G².     

Fractal analysis of long-range paleoclimatic data: Oxygen isotope record of pacific core V28-239

R/S analysis of the oxygen isotope curve of Pacific core V28-239 yields a fractal dimension of 1.22. This value is considered to characterize global climatic change over the last 2 million years as expressed by changing O¹⁸ ratios and confirms that climatic variations are characterized by long-term persistence. The fractal dimension of 1.22 compares favorably with the approximate fractal dimension of 1.26 for annual precipitation records for nine major cities in the United States. Although the precipitation and oxygen isotope data are measured in different physical units and recorded at different time scales, fractal analysis allows for a mathematical comparison of the two phenomena. Additionally, since the fractal dimensions of the oxygen isotope and precipitation records are similar, it is implied that such fractal dimensions are characteristic of climate change over the spectral range of 10 to 10⁶ years. Given this temperature curves based on fractal parameters of long-term O¹⁸ data could be constructed which would allow examination of characteristics of temperature variation over tens and hundreds of years. Such studies may allow the establishment of limits on natural temperature variation and document the persistence of temperature trends through time. If these trends and limits can be resolved, long-range climatic prediction is feasible.