Recent results on the solar diameter

Using optically identical telescopes at different sites, we have measured the solar diameter with a drift-scan technique. In order to investigate the cause of the observed fluctuations, we not only compare observations made simultaneously by different observers at the same telescope, but also observations made simultaneously at two different sites. Our main results are: (a) The mean error of a single drift time measurement is ±0.08s(or ± 1.1) at Izaña and ±0.11 s (or ± 1.7) at Locarno; this closely corresponds to the angular resolution at those two sites under normal seeing conditions, (b) We find no correlation between observations at different sites; a significant correlation exists, however, between observations made simultaneously by different observers at the same site: This indicates that most of the observed fluctuations are due to atmospheric effects (image motion) rather than personality effects, (c) The mean solar semi-diameter derived from a total of 1122 observations made in 1990 (472 at Izaña, 650 at Locarno) is R = (960.56 ± 0.03) (Izaña: 960.51, Locarno: 960.59); this may be compared with R = (960.32 ± 0.02) which is obtained from a re-analysis of 1773 observations made in 1981 (Izaña: 960.16, Locarno: 960.38). Although a small residual increase of the solar diameter during the last ten years seems to be indicated, we conclude that most - if not all - of the observed variations are due to variable seeing conditions, and that there is still no conclusive evidence for a genuine solar variation with amplitudes in excess of about ±0.3.     

The Mees CCD imaging spectrograph

The Mees CCD (MCCD) instrument is an imaging spectroscopy device which uses the 25 cm coronagraph telescope and the 3.0 m Coudé spectrograph at Mees Solar Observatory (MSO) on Haleakala, Maui. The instrument works with resolving power up to R 200 000 with significant throughput from 3934 Å (Caii K) to 10 000 Å. A fast guiding active mirror stabilizes the image during observations. A rapidly writing magnetic tape storage system allows observations to be recorded at 256 kbytes s^–1. Currently, the MCCD is used for imaging spectroscopy of solar flares at 6563 Å (H), and velocity measurements of umbral oscillations; future plans include emission line studies of active region coronae, and photospheric studies of solar oscillations.     

Geology and tectonics of the Themis Regio-Lavinia Planitia-Alpha Regio-Lada Terra area,Venus: Results from Arecibo image data

New radar images obtained from the Arecibo Observatory (resolution 1.5–4.0 km) for portions of the southern hemisphere of Venus show that: the upland of Phoebe Regio contains the southern extension of Devana Chasma, a rift zone extending 4200 km south from Theia Mons and interpreted as a zone of extension; Alpha Regio, the only large region of tessera within the imaged area, is similar to tessera mapped elsewhere on the planet and covers a smaller percentage of the surface than that observed in the northern high latitudes; the upland made of Ushas, Innini and Hathor Montes consists of three distinct volcanic constructs; Themis Regio is mapped as an ovoid chain of radar-bright arcuate single and double ring structures, edifices and bright lineaments. This area is interpreted as a region of mantle upwelling and on the basis of apparent split and separated features, a zone of localized faulting and extension. Linear zones of deformation in Lavinia Planitia are characterized by lineament belts that are often locally elevated, are similar to ridge belts mapped in the northern high latitudes and are interpreted to be characterized mainly by compression; radar-bright lava complexes within Lavinia Planitia are unique to this part of the planet and are interpreted to represent areas of eruption of high volumes of extremely fluid lava; the upland of Lada Terra is bound to the north by a linear deformation zone interpreted as extensional, is characterized by large ovoids and coronae, is interpreted to be associated with an area of mantle upwelling, and is in contrast to the northern high latitude highland of Ishtar Terra. Regions of plains in the southern hemisphere cover about 78%; of the mapped area and are interpreted to be volcanic in origin. Located within the area imaged (10–78 S) are 52 craters interpreted to be of impact origin ranging from 8 to 157 km in diameter. On the basis of an overall crater density of 0.94 craters/10⁶ km², it is determined that the age of this part of the Venus surface is similar to the 0.3 to 1.0 billion year age calculated for the equatorial region and northern high latitudes. The geologic characteristics of the portion of the Venus southern hemisphere imaged by Arecibo are generally similar to those mapped elsewhere on the planet. This part of the planet is characterized by widespread volcanic plains, large volcanic edifices, and zones of linear belt deformation. The southern hemisphere of Venus differs from northern high latitudes in that tessera makes up only a small percentage of the surface area and the ovoid chain in Themis Regio is unique to this part of the planet. On the basis of the analysis presented here, the southern hemisphere of Venus is interpreted to be characterized by regions of mantle upwelling on a variety of scales (ovoids, region made up of Ushas, Innini and Hathor Montes), upwelling and extension (Themis Regio) and localized compression (lineament belts in Lavinia Planitia).     

The luminosity function of halo white dwarfs

Recently, Liebertet al. (1989) have obtained an approximate observational luminosity function for halo white dwarfs. Certainly, this first attempt will be improved by the forthcoming Very Large Telescopes. Here we construct theoretical luminosity functions of such stars and we examine their dependence on the age of the halo. Finally, we show that accurate observational luminosity functions could provide useful information about the evolution of the galaxy.Paper presented at the 11th European Regional Astronomical Meetings of the IAU on New Windows to the Universe, held 3–8 July, 1989, Tenerife, Canary Islands, Spain.     

Nucleosynthesis in SNIa

The final products of a SNIa explosion critically depend on the degree of neutronization of the incinerated material and on the total amount of burned material. Here we study their dependence on the velocity of the burning front and on the density at which the thermonuclear runaway starts. The abundances of⁵⁴Cr,^{54, 58}Fe,^{58, 62}Ni provide some constraints to the possible values of model parameters.Paper presented at the 11th European Regional Astronomical Meetings of the IAU on New Windows to the Universe, held 3–8 July, 1989, Tenerife, Canary Islands, Spain.     

Mass motions associated with Hα active region arch structures

We have studied mass motions associated with active region arch structures from observations of a developing active region near the center of the solar disk. We present a method for the computation of the line-of-sight velocity from photographs at H ± 0.5 under the assumption of Beckers' cloud model and reasonable assumptions about the Doppler width and optical depth of the arches. Some arches show motions typical to arch filaments (the material moves towards the observer near the apex of the arch and away from the observer near the footpoints), while in others the velocity field is more complex. Assuming a symmetric loop, we reconstructed the velocity vector along an arch filament. The results are consistent with the picture where material is draining out of the filament while the whole structure is ascending with a velocity near that of the apex, which does not exceed 10 km s^–1. The motion is systematically slower than expected from a free-fall model.     

Angular momentum transport in pre-main-sequence stars of intermediate mass

Pre-Main-Sequence stars with masses between 2 and 5 M (Herbig Ae/Be stars) have radiative subphotospheric envelopes. However, they possess strong stellar winds and show definite signs of activity which could be linked to surface magnetic field. Therefore, they must lose angular momentum at a significant rate.We investigate the effect of such angular momentum losses on the internal structure of these stars, and on the distribution of angular velocity inside them. This paper presents a preliminary analysis guided by an analogy with laboratory and geophysical fluids. We propose that the friction exerted at the stellar surface by the angular momentum losses produces a mixed layer below the surface, separated from the unperturbed interior by an interface. Using scaling laws established by experimental studies of sheared stratified fluids, we discuss a simplified model for the evolution of the mixed layer.Although this model is still too preliminary to allow quantitative predictions, we show that for a reasonable choice of parameters, the mixed layer penetrates into the stellar interior on a time-scale of 10⁶ years, comparable to the Kelvin time-scale for the Herbig Ae/Be stars.     

Deep CCD photometry of stars in the globular cluster M3

Preliminary results on new CCD photometry inV andB bands of approximately 5000 stars in four overlapping fields in the globular cluster M3 are presented. The colour-magnitude diagram shows a very well-defined sequence with a small scatter, going fainter than previously published work on this cluster. The turn-off point found atV=19.1±0.2 mag and (B-V)=0.445±0.01, is slightly redder than those obtained in previous studies.Paper presented at the 11th European Regional Astronomical Meetings of the IAU on New Windows to the Universe, held 3–8 July, 1989, Tenerife, Canary Islands, Spain.     

Magneto-atmospheric waves

The nature and properties of magneto-atmospheric (MA) waves are discussed here. A simple model atmosphere, isothermal and permeated by a uniform vertical magnetic field, was used to find that there are two type of modes with avoided crossing of the eigencurves in a K - diagram. The properties of these waves are found to be identical to the uncoupled fast and slow MA waves away from the crossings (specially for small horizontal wave number K 1). The energy density for the fast modes is found to vanish with height and is responsible for the 3-min umbral oscillations, while the slow mode energy density is harmonic.     

Aeolian processes on Venus

In this pre-Magellan review of aeolian processes on Venus we show that the average rate of resurfacing is less than 2 to 4 km/Ga, based on the impact crater size frequency distribution derived from Venera observations, reasonable values of the impact flux, and the assumption of steady state conditions between crater production and obliteration. Viscous relaxation of crater topography, burial by volcanic deposits, tectonic disruption, chemical and mechanical weathering and erosion, and accumulation of windblown sediments probably all contribute to resurfacing. Based on the rate of disappearance of radar-bright haloes around impact craters, the rate of removal of blocky surfaces has been estimated to be about 10^–2 km/Ga. Pioneer-Venus altimetry data show that the average relative permittivity (at 17 cm radar wavelength) of the surface is too high for exposure of soils 10 cm deep, except for ~5% of the planet located primarily in tessarae terrains. The tectonically disrupted tessarae terrains may be sites of soil generation caused by tectonic disruption of bedrock and the presence of relatively steep slopes, or they may be terrains that serve as traps for windblown material. The overall impression is that Venus is a geologically active planet, but one dominated by volcanism and tectonism. On the other hand, theoretical considerations and experimental data on weathering and transport of surface materials suggest rather different conditions. Thermochemical arguments have been advanced that show: (1) CO₂ and SO₂ incorporate into weathering products at high elevation, (2) transport of weathered material by the wind to lower-elevation plains, and (3) re-equilibration of weathered material, releasing both CO₂ and SO₂. In addition, kinetic data suggest a rate of anhydrite formation of 1 km/Ga, a value comparable to the soil erosion rate on Mars, a planet with an active aeolian environment. Experiments and theoretical studies of aeolian processes show that measured surface winds are capable of moving sand and silt on Venus. Assuming that there is a ready sand supply, the flux could be as high as 2.5 × 10^–5 g/cm/s, a value comparable to desert terrains on Earth. In an active aeolian abrasion environment, sand grains could have lifetimes <10³ years. In addition, comminuted debris may be cold-welded to surfaces at the same time as abrasion is occurring. Magellan altimetry and SAR observations should allow assessment of which model for venusian surface modification (active vs. inactive surficial processes) is correct, given the global coverage, high spatial resolution, the calibrated nature of the data, and the potential during extended missions of acquiring multiple SAR views of the surface.Geology and Tectonics of Venus, special issue edited by Alexander T. Basilevsky (USSR Acad. of Sci. Moscow), James W. Head (Brown University, Providence), Gordon H. Pettengill (MIT, Cambridge, Massachusetts) and R. S. Saunders (J.P.L., Pasadena).