Calorimetry of silicate melts at 1773 K: measurement of enthalpies of fusion and of mixing in the systems diopside-anorthite-albite and anorthite-forsterite

Transposed-temperature-drop calorimetry, using a Setaram HT 1500 calorimeter, was used to study directly the melting at 1773 K of mixtures of crystalline albite, anorthite, and diopside and of anorthite and forsterite. The enthalpy of albite at 1000–1773 K, starting with both crystalline and glassy samples, was also measured. The results confirm previously measured enthalpies of fusion of albite, diopside and anorthite (Stebbins et al. 1982, 1983; Richet and Bottinga 1984,1986). The new results use thermochemical cycles which completely avoid the glassy state by transforming crystals directly to melts. The enthalpy of fusion of forsterite is estimated to be 89±12 kJ/mol at 1773 K and 114±20 kJ/mol at its melting point of 2163 K. The data allow semiquantitative evaluation of heats of mixing in the molten silicates. Along the Ab-An join, enthalpies of mixing in the liquid at 773 K are the same or somewhat more negative than those in the glass at 986 K, whereas along Ab-Di and An-Di, enthalpies of mixing in the liquid are distinctly more positive than in the glass. These differences correlate with excess heat capacities in the liquids suggested by Stebbins et al. (1984).     

The use of optimization to construct critical accelerograms for given structures and sites

In this paper a methodology has been presented for constructing the most critical accelerogram from among a be class of candidate accelerograms for a given site and structure. This most critical accelerogram could be used to assess seismic resistance of a structure with a high level of confidence. Specifically, the method superimposes accelerograms recorded at similar sites to create the candidate accelerograms, then uses optimization and approximation techniques find the most critical accelerogram. The most critical accelerogram is defined as the one which maximizes damage is structure, as computed by non-linear dynamic structural analysis, as well as satisfies constraints on ground parameters to ensure credibility. The damage has been defined as cumulative inelastic energy dissipation or sure of interstorey drifts. The method is applied to ten examples in the paper.     

Experimental melting of crustal xenoliths from Kilbourne Hole,New Mexico and implications for the contamination and genesis of magmas

Experiments (P=6.9 kb; T=900–1000°C) on four crustal xenoliths from Kilbourne Hole demonstrate the varying melting behavior of relatively dry crustal lithologies in the region. Granodioritic gneisses (samples KH-8 and KH-11) yield little melt (<5–25%) by 925°C, but undergo extensive (30–50%) melting between 950 and 1000°C. A dioritic charnockite (KH-9) begins to melt, with the consumption of all modal K-feldspar, by 900°C. It is as fertile a melt source as the granodiorites at lower temperatures, but is outstripped in melt production by the granodiorite gneisses at high temperature, yielding only 26% melt by 1000°C. A pelitic granulite (KH-12) proved to be refractory (confirming earlier predictions based on geochemistry) and did not yield significant melt even at 1000°C. All melts have the composition of metaluminous to slightly peraluminous granites and are unlikely to be individually recognizable as magma contaminants on the basis of major element chemistry. However, the relative stability of K-feldspar during partial melting will produce recognizable signatures in Ba, Eu, K/Ba, and Ba/Rb. Melts of KH-11, which retains substantial K-feldspar throughout the melting interval, are generally low in Ba (<500–800 ppm), have high K/Ba and low Ba/Rb (est.) (62–124 and 1–3, respectively). Melts of KH-9, in which all K-feldspar disappears with the onset of melting, are Ba-rich [2000–2600 ppm, K/Ba=16–22; Ba/Rb (est.) =25–47]. Melts of KH-8 have variable Ba contents; <500 ppm Ba at low temperature but >900 ppm Ba in high-temperature melts coexisting with a K-feldspar-free restite. Although REE were not measured in either feldspar or melt, the high Kspar/melt Kds for Eu suggests that the melts coexisting with K-feldspar will have strong negative Eu anomalies. Isotopic and trace element models for magma contamination need to take into account the melting behavior of isotopic reservoirs. For example, the most radiogenic (and incompatible element-rich) sample examined here (the pelitic granulite,⁸⁷Sr/⁸⁶Sr=0.757) is refractory, while samples with far less radiogenic Sr (⁸⁷Sr/⁸⁶Sr=0.708-0.732) produced substantial melt. This suggests that, in this area, the isotopic signature of contamination may be more subtle than expected. The experimental results can be used to model the petrogenesis of Oligocene volcanic rocks exposed 150 km to the NW of Kilbourne Hole, in the Black Range in the Mogollon-Datil volcanic field. The experimental results suggest that a crustal melting origin for the Kneeling Nun and Caballo Blanco Tuffs is unlikely, even though such an interpretation is permitted by Sr isotopes. Curstal contamination of a mantle-derived magma best explains the chemical and isotopic characteristics of these tuffs. Both experimental and geochemical data suggest that the rhyolites of Moccasin John Canyon and Diamond Creek could represent direct melts of granodiorite basement similar, but not identical, to the Kilbourne Hole granodiorites, perhaps slightly modified by crystal fractionation. The absence of volcanic rocks having⁸⁷Sr/⁸⁶Sr>0.74 in the region is consistent with the refractory character of the pelitic granulite.     

Two bioerosion ichnofacies produced by early and late burial associated with sea-level change

In bioerosion, as in trace fossils as a whole, deeply emplaced structures have greater survival value than shallow structures. That is to say, tiering (the relative depth to which rasping, etching and boring organisms penetrate their substrate) is of paramount importance for the preservation potential of individual trace fossils. An Entobia ichnofacies is established for trace fossil assemblages dominated by deep tier borings and arising from long-term bioerosion, such as occurs on sediment-free submarine cliffs or hardgrounds. A Gnathichnus ichnofacies comprises assemblages containing all tiers, including superficial sculptures produced by radulation that have very little preservation potential. Such assemblages occur in short-term bioerosion situations as on shell surfaces and hardgrounds buried early by sedimentation. Correspondence to: R. G. Bromley     

Multiphase inclusions in plagioclase from anorthosites in the Stillwater Complex,Montana: implications for the origin of the anorthosites

Multiphase inclusions, consisting of clinopyroxene+ilmenite+apatite, occur within cumulus plagioclase grains from anorthosites in the Stillwater Complex, Montana, and in other rocks from the Middle Banded series of the intrusion. The textures and constant modal mineralogy of the inclusions indicate that they were incorporated in the plagioclase as liquid droplets that later crystallized rather than as solid aggregates. Their unusual assemblage, including a distinctive manganiferous ilmenite and the presence of baddeleyite (ZrO₂), indicates formation from an unusual liquid. A process involving silicater liquid immiscibility is proposed, whereby small globules of a liquid enriched in Mg, Fe, Ca, Ti, P, REE, Zr and Mn exsolved from the main liquid that gave rise to the anorthosites, became trapped in the plagioclase, and later crystallized to form the inclusions. The immiscibility could have occurred locally within compositional boundaries around crystallizing plagioclase grains or it could have occurred pervasively throughout the liquid. It is proposed that the two immiscible liquids were analogous, n terms of their melt structures, to immiscible liquid pairs reported in the literature both in experiments and in natural basalts. For the previously reported pairs, immiscibility is between a highly polymerized liquid, typically granitic in composition, and a depolymerized liquid, typically ferrobasaltic in composition. In the case of the anorthosites, the depolymerized liquid is represented by the inclusions, and the other liquid was a highly polymerized aluminosilicate melt with a high normative plagioclase content from which the bulk of the anorthosites crystallized. Crystallization of the anorthosites from this highly polymerized liquid accounts for various distinctive textural and chemical features of the anorthosites compared to other rocks in the Stillwater Complex. A lack of correlation between P contents and chondrite-normalized rare earth element (REE) ratios of plagioclase separates indicates that the amount of apatite in the inclusions is too low to affect the REE signature of the plagioclase separates. Nevertheless, workers should use caution when attempting REE modelling studies of cumulates having low REE contents, because apatite-bearing inclusions can potentially cause problems.     

A Raman spectroscopic study of H/D isotopically substituted hydrous aluminosilicate glasses

We have obtained high quality Raman spectra for two H/D isotopically substituted hydrous aluminosilicate glasses with compositions along the NaAlSi₃O₈-SiO₂ join. Consistent with the results of previous studies, the isotope shift for the band near 900 cm^–1, whose intensity grows with increasing water content, is extremely small: v _h /v _d = 1.004 ± 0.004. The lack of a definite H/D isotope shift for this band does not, however, preclude its association with a vibration of a hydrous species in the glass, because of likely strong coupling between different vibrational modes of hydrated framework species. The 900 cm^–1 band could well be due to a T — OH (T = Si, Al) stretching or bending vibration in the hydrous glass, as required by the presence of a combination band near 4500 cm^–1 in near-infrared spectra.     

An integrated data-directed numerical method for estimating the undiscovered mineral endowment in a region

An integrated data-directed numerical method has been developed to estimate the undiscovered mineral endowment within a given area. The method has been used to estimate the undiscovered uranium endowment in the San Juan Basin, New Mexico, U.S.A. The favorability of uranium concentration was evaluated in each of 2,068 cells defined within the Basin. Favorability was based on the correlated similarity of the geologic characteristics of each cell to the geologic characteristics of five area-related deposit models. Estimates of the undiscovered endowment for each cell were categorized according to deposit type, depth, and cutoff grade. The method can be applied to any mineral or energy commodity provided that the data collected reflect discovered endowment.     

Structural chemistry of synthetic cordierite: Evidence for solid solutions and disordered compositional domains in Bi-flux-grown Mg-cordierites

The structure, crystal chemistry, and microstructure of disordered and ordered Mg-cordierites synthesized in a bismuth oxide flux system have been studied by a combination of x-ray and neutron powder diffraction and quantitative x-ray microanalysis using analytical electron microscopy. Microchemical data obtained on Bi-flux cordierites using energy-dispersive x-ray analysis is interpreted through comparison with data collected on stoichiometric Mg₂Al₄Si₅O₁₈ glass and α- and β-cordierite samples synthesized by subsolidus crystallization of the glass. Bi-flux cordierites crystallize in both the hexagonal and orthorhombic polymorphs and contain 5 to 10 at% occupancy of bismuth on the C1 and C2 channel sites. The microstructure of Bi-flux α-cordierite is characterized by the existence of local domains of disordered cordierite solid solutions with variable composition and significant vacancy concentrations on the octahedral site. The β-cordierites have a more homogeneous microstructure but are still Al-deficient, Si-rich solid solutions.     

Dynamics of epiphytic photoautotrophs and heterotrophs inZostera marina (eelgrass) microcosms: Responses to nutrient enrichment and grazing

The combined effects of nutrient enrichment and grazing by isopods and amphipods on abundances of seagrass epiphytes were tested inZostera marina L. (eelgrass) microcosms. Using epifluorescence microscopy, densities of epiphytic diatoms, cyanobacteria, heterotrophic flagellates, and heterotrophic bacteria were enumerated after 1 mo and 2 mo of treatment. In general, numbers of diatoms decreased, in the presence of grazers and showed little response to nutrient enrichment, whereas numbers of cyanobacteria increased with nutrient enrichment and showed little response to grazing. Thus, macrofaunal grazing maintained a photoautotrophic community domainated by cyanobacteria, particularly under nutrient enriched conditions. Following 2 mo of treatment, dense macroalgal growth under nutrient-enriched conditins with grazers absent appeared to limit populations of both epiphytic autotrophs. Patterns of abundance of heterotrophic bacteria suggested that the original bacteria population was nutrient limited. Bacteria populations may have been limited by organic carbon supplies at the end of the experiment. Abundances of heterotrophic flagellates and bacteria were strongly correlated on both sampling dates. Results suggest that heterotrophic flagellates might serve as a link between heterotrophic bacterial production and higher trophic levels in seagrass epiphyte food webs.     

Environmental impacts of shrimp farming with special reference to the situation in the continental United States

Shrimp culture technology has resulted in development of a major shrimp farming industry worldwide. Without the shrimp farming industry, increasing demands for shrimp by consumers could not be met, resulting in increased pressure on wild shrimp resources. Unfortunately, there are realized and potential adverse environmental effects on estuarine ecosystems as a result of shrimp farming. The effects can be categorized as wetland destruction for construction of shrimp farms, hypernutrification of estuarine ecosystems by shrim pond effluent, “biological pollution” of native shrimp stocks through escapement of aquaculture stocks, water use and entrainment of estuarine biota, and impacts of shrimp farm chemicals on estuarine systems. While the shrimp farming industry in the United States is small, the United States is effectively addressing all the realized and potential environmental impacts through regulation and research at the federal and state levels. Areas of regulation and research include stringent prohibitions on wetland destruction, regulation of effluents and support of research to eliminate and/or reduce effluents, escapement prevention technology and development of high-health stocks, minimizing entrainment of estuarine biota through water conservation and screening technology, and regulation of chemical use in the shrimp farming industry and support of research on shrimp pathology and environmentally safe disease control. Work is still in progress and not all problems have been resolved to the complete satisfaction of shrimp farmers and estuarine conservationists. However, the situation in the United States should serve as a model of how to encourage sustainable economic development through commercial shrimp farming while abating adverse environmental impacts on estuarine systems. To further improve the situation, the development and adoption of “best management practices” for shrimp aquaculture are recommended.