Biodegradation of phenol from a synthetic aqueous system using acclimatized activated sludge

Phenol is one of the aromatic hydrocarbons. Phenol and its derivatives are highly toxic. These pollutants can be observed in the effluents of many industries. This research investigates the removal of phenol by the use of activated sludge in a batch system. The effects of influencing factors on biodegradation efficiency have been evaluated. The main factors considered in this study were the volume of acclimatized activated sludge inoculation, pH, temperature, and initial concentration of phenol. The inoculation volumes of 1, 3, and 5 mL of acclimatized activated sludge were taken into account. Different pH values of 3, 5, 7, 9, and 11 were examined. The experiments were conducted for temperatures of 25, 30, 35, and 40 °C and initial phenol concentrations of 400, 800, 1,000, and 1,500 ppm. The results show that the acclimatized activated sludge has a high capacity for the removal of phenol. From a 100-mL aqueous solution was removed 1,500 ppm of phenol after 80 h. Furthermore, maximum phenol removal was observed for an inoculation volume of 5 mL for three different phenol concentrations of 100, 400, and 800 ppm. The best pH was 7 for the biodegradation process, and the optimum temperature was 30 °C. It was further found that an increase in the phenol concentration increased its removal time. Moreover, the activated sludge could effectively remove about 99.9 % of phenol from a synthetic aqueous solution in a batch system.     

Assessment of hydrochemistry and heavy metals pollution in the groundwater of Ardestan mineral exploration area,Iran

The aim of this research is to determine the effective factors on the hydrogeochemistry and assessment of heavy metals pollution indices in the groundwater of Ardestan copper exploration area, Iran. In this study, in total, 111 groundwater samples from one well and several qanats and springs were collected. Piper and Stiff diagrams and statistical methods and quality indices were applied to hydrochemical data. Afterward, the water samples were classified into four groups, namely CaHCO3, CaCl, NaCl, and NaHCO3. According to evaluation indices, considering the fact that only a few points are in the high risk level, the groundwater of the study area has a low level of pollution. On the other hand, the pH of the groundwater of the region was mostly neutral and acid mine drainage was not found. Since the condition of the area is in pre-mining process, two factors are possibly influential: (1) rocks or minerals having sulfides are not exposed to an atmosphere (normally below groundwater) and H⁺ release does not occur and (2) the existence of minerals containing silicate and carbonate that can rapidly reduce acidification of water. Finally, it seems that during mining and in post-mining conditions, acid rock drainage which results from the oxidation of sulfides will probably influence the quality of water resources in Ardestan city. This is because the groundwater flow direction is from the mine toward Ardestan plain.     

Correlation of lineaments and groundwater quality in Dasht-e-Arjan Fars,SW of Iran

The NE-oriented Dasht-e-Arjan graben is located 65 km west of Shiraz and has resulted from the active Kare-e-Bas fault segmentations. This extensional graben bounded by two fault system east-Arjan and west-Arjan to the Shahneshin and Salamati anticline. In these study using Landsat 7 ETM images with resolution 2.5 m and directional filtering in the four azimuths and semi-automatic technique for linear structure in the study area. Using the obtained data from extracted lineaments, the rose diagrams of the main strike lineaments are well confirm with field measurements of faults with N56° ± 4°E direction. The structural lineaments of the study area show that the Dasht-e-Arjan area is underlain by the limestone, sandstone, and marl. LANDSAT imagery of the area has been analyzed and interpreted in order to determine the lineament and groundwater quality across the area. The fracture is structurally controlled and mostly influences both the groundwater and surface water pollution and flow directions in the Dasht-e-Arjan. Using visual interpretation, determining the lineaments on the satellite image is very difficult and subjective, and it requires an experienced interpreter. In this study, the lineament analysis is undertaken to examine the orientation of the lineament, the relationship between lineaments and tectonic features and groundwater quality. Lineament density maps show that the lineament density is high around areas. Areas having high lineament density represent areas with relatively high groundwater pollution. Field observations agreed with the results from the analysis of the imagery.     

Biodegradation of cellulose acetate/poly(butylene succinate) membrane

Applying biodegradable polymers in membrane preparation for separation processes is expected to be helpful in solving waste disposal problem. In this study, biodegradable blend membranes of cellulose acetate (CA)/poly(butylene succinate) (PBS) were prepared and the microorganisms possessing the ability of degrading them were isolated from soil. The isolates were classified into two groups of bacteria and fungi. The membranes biodegradation after cultivation by the isolates in liquid media was further confirmed by weight loss measurement, Fourier transform infrared analysis and scanning electron microscopy. Findings revealed that CA degradation could be improved in the blend membrane structure. Moreover, strain BG106 and BG111 could degrade the membranes at the fastest rate among the other bacteria and fungi, respectively. To our knowledge, BG111 was found to belong to Alternaria sp. and this is the first report of its PBS degradation activity. Moreover, the PBS degradability of BG104 (B. Safensis), BG105 (Achromobacter insuavis) and BG106 (Brevibacterium halotolerans) strains was reported for the first time.     

Assessing factors affecting drought,earthquake, and flood risk perception: empirical evidence from Bangladesh

Natural Hazards - Understanding household disaster risk perception is crucial to formulate and apply disaster risk reduction strategies. Using survey data from 300 households from three highly...     

Application of frequency ratio,statistical index,and weights-of-evidence models and their comparison in landslide susceptibility mapping in Central Nepal Himalaya

The Mugling–Narayanghat road section falls within the Lesser Himalaya and Siwalik zones of Central Nepal Himalaya and is highly deformed by the presence of numerous faults and folds. Over the years, this road section and its surrounding area have experienced repeated landslide activities. For that reason, landslide susceptibility zonation is essential for roadside slope disaster management and for planning further development activities. The main goal of this study was to investigate the application of the frequency ratio (FR), statistical index (SI), and weights-of-evidence (WoE) approaches for landslide susceptibility mapping of this road section and its surrounding area. For this purpose, the input layers of the landslide conditioning factors were prepared in the first stage. A landslide inventory map was prepared using earlier reports, aerial photographs interpretation, and multiple field surveys. A total of 438 landslide locations were detected. Out these, 295 (67 %) landslides were randomly selected as training data for the modeling using FR, SI, and WoE models and the remaining 143 (33 %) were used for the validation purposes. The landslide conditioning factors considered for the study area are slope gradient, slope aspect, plan curvature, altitude, stream power index, topographic wetness index, lithology, land use, distance from faults, distance from rivers, and distance from highway. The results were validated using area under the curve (AUC) analysis. From the analysis, it is seen that the FR model with a success rate of 76.8 % and predictive accuracy of 75.4 % performs better than WoE (success rate, 75.6 %; predictive accuracy, 74.9 %) and SI (success rate, 75.5 %; predictive accuracy, 74.6 %) models. Overall, all the models showed almost similar results. The resultant susceptibility maps can be useful for general land use planning.     

Storage dam’s locality placing by MCDM techniques (case study: three dams in Iran)

MCDM (multi-criteria decision making) techniques are used to choose the best alternative among the relevant ones and rank the others. In this research, MCDM techniques were used to choose and rank the best places for constructing storage dams in Iran. To achieve this goal, the relevant information and data about dam construction situations were collected. Then, the recommended places for constructing storage dams were ranked by using MCDM techniques and according to the most suitable criteria which have been chosen based on experts’ opinions. To rank dam constructing project, three MCDM techniques, i.e., TOPSIS, AHP, and DEMATEL, were used. The results showed that the application of MCDM models by putting emphasis on economic, social, political, and technical criteria enables government and watershed managers to choose the best alternative(s) for constructing a storage dam.     

Soil organic carbon mapping using remote sensing techniques and multivariate regression model

Soil organic carbon (SOC) is an important aspect of soil quality and plays an imperative role in soil productivity in the agriculture ecosystems. The present study was applied to estimate the SOC stock using space-borne satellite data (Landsat 4–5 Thematic Mapper [TM]) and ground verification in the Medinipur Block, Paschim Medinipur District and West Bengal in India. In total, 50 soil samples were collected randomly from the region according to field surveys using a hand-held Global Positioning System (GPS) unit to estimate the surface SOC concentrations in the laboratory. Bare soil index (BSI) and normalized difference vegetation ndex (NDVI) were explored from TM data. The satellite data-derived indices were used to estimate spatial distribution of SOC using multivariate regression model. The regression analysis was performed to determine the relationship between SOC and spectral indices (NDVI and BSI) and compared the observed SOC (field measure) to predict SOC (estimated from satellite images). Goodness fit test was performed to determine the significance of the relationship between observed and predicted SOC at p ≤ 0.05 level. The results of regression analysis between observed SOC and NDVI values showed significant relationship (R² = 0.54; p < 0.0075). A significant statistical relationship (r = ?0.72) was also observed between SOC and BSI. Finally, our model showed nearly 71% of the variance of SOC distribution could be explained by SOC and NDVI values. The information from this study has advanced our understanding of the ongoing ecological development that affects SOC dissemination and might be valuable for effective soil management.     

Approximate formulas for rotational effects in earthquake engineering

The paper addresses the issue of researching into the engineering characteristics of rotational strong ground motion components and rotational effects in structural response. In this regard, at first, the acceleration response spectra of rotational components are estimated in terms of translational ones. Next, new methods in order to consider the effects of rotational components in seismic design codes are presented by determining the effective structural parameters in the rotational loading of structures due only to the earthquake rotational components. Numerical results show that according to the frequency content of rotational components, the contribution of the rocking components to the seismic excitation of short period structures can never be ignored. During strong earthquakes, these rotational motions may lead to the unexpected overturning or local structural damages for the low-rise multi-story buildings located on soft soil. The arrangement of lateral-load resisting system in the plan, period, and aspect ratio of the system can severely change the seismic loading of wide symmetric buildings under the earthquake torsional component.     

Rain-fed fig yield as affected by rainfall distribution

Variable annual rainfall and its uneven distribution are the major uncontrolled inputs in rain-fed fig production and possibly the main cause of yield fluctuation in Istahban region of Fars Province, I.R. of Iran. This introduces a considerable risk in rain-fed fig production. The objective of this study was to find relationships between seasonal rainfall distribution and rain-fed fig production in Istahban region to determine the critical rainfall periods for rain-fed fig production and supplementary irrigation water application. Further, economic analysis for rain-fed fig production was considered in this region to control the risk of production. It is concluded that the monthly, seasonal and annual rainfall indices are able to show the effects of rainfall and its distribution on the rain-fed fig yield. Fig yield with frequent occurrence of 80 % is 374 kg ha^?1. The internal rates of return for interest rate of 4, 8 and 12 % are 21, 58 and 146 %, respectively, that are economically feasible. It is concluded that the rainfall in spring especially in April and in December has negatively affected fig yield due to its interference with the life cycle of Blastophaga bees for pollination. Further, it is concluded that when the rainfall is limited, supplementary irrigation can be scheduled in March.