Collision, subduction and accretion events in the Philippines: A synthesis

Abstract The Philippines preserves evidence of the superimposition of tectonic processes in ancient and present‐day collision and subduction zone complexes. The Baguio District in northern Luzon, the Palawan–Central Philippine region and the Mati–Pujada area in southeastern Mindanao resulted from events related to subduction polarity reversal leading to trench initiation, continent‐arc collision and autochthonous oceanic lithosphere emplacement, respectively. Geological data on the Baguio District in Northern Luzon reveal an Early Miocene trench initiation for the east‐dipping Manila Trench. This followed the Late Oligocene cessation of subduction along the west‐dipping proto‐East Luzon Trough. The Manila Trench initiation, which is modeled as a consequence of the counter‐clockwise rotation of Luzon, is attributed to the collision of the Palawan microcontinental block with the Philippine Mobile Belt. In the course of rotation, Luzon onramped the South China Sea crust, effectively converting the shear zone that bounded them into a subduction zone. Several collision‐related accretionary complexes (e.g. Romblon, Mindoro) are present in the Palawan–Central Philippine region. The easternmost collision zone boundary is located east of the Romblon group of islands. The Early Miocene southwestward shift of the collision boundary from Romblon to Mindoro started to end by the Pliocene. Continuous interaction between the Palawan microcontinental block and the Philippine Mobile Belt is presently taken up again along the collisional boundary east of the Romblon group of islands. The Mati–Pujada Peninsula area, on the other hand, is underlain by the Upper Cretaceous Pujada Ophiolite. This supra‐subduction zone ophiolite is capped by chert and pelagic limestones which suggests its derivation from a relatively deep marginal basin. The Pujada Ophiolite could be a part of a proto‐Molucca Sea plate. The re‐interpretation of the geology and tectonic settings of the three areas reaffirm the complex geodynamic evolution of the Philippine archipelago and addresses some of its perceived geological enigmas.     

Thermal history,hydrocarbon generation and migration in the Horn Graben in the Danish North Sea: a 2D basin modelling study

In this study a 2D basin model has been built along a transect crossing the Horn Graben in WNW-ESE direction. The aim of the investigation was to improve the understanding of the thermal evolution of the basin and its influence on possible petroleum systems. The 2D model of the subsurface is based on one seismic line and data from two exploration wells. Both wells TD’ed in Triassic sediments. The updoming of the Ringkøbing-Fyn High began during Late Carboniferous–Early Permian. At the end of the Permian the Horn Graben became active due to regional extension. The subsequent sedimentation history from Triassic to date is well recorded by well reports. A matter of debate has been whether or not significant amounts of Pre-Permian sediments exist in this area of the North Sea. Since organic material rich Paleozoic sediments serve as source rocks in widespread areas of North Germany and the southern North Sea it would be of great importance to know whether the same deposits exist in the Horn Graben. Nielsen et al. (Bull Geol Soc Denmark Copenhagen 45:1–10, 1998) introduced a model, which shows Paleozoic sediments covering the basement at a maximum depth of 6.5 km. Assuming, Paleozoic sediments are underlying the Permian salt deposits there should be an active petroleum system present. The 2D model includes the Paleozoic source rock and tries to explain why two exploration wells have not found petroleum.     

A statistical test on the local effects of spatially structured variance

Spatial variance is an important characteristic of spatial random variables. It describes local deviations from average global conditions and is thus a proxy for spatial heterogeneity. Investigating instability in spatial variance is a useful way of detecting spatial boundaries, analysing the internal structure of spatial clusters and revealing simultaneously acting geographic phenomena. Recently, a corresponding test statistic called ‘Local Spatial Heteroscedasticity’ (LOSH) has been proposed. This test allows locally heterogeneous regions to be mapped and investigated by comparing them with the global average mean deviation in a data set. While this test is useful in stationary conditions, its value is limited in a global heterogeneous state. There is a risk that local structures might be overlooked and wrong inferences drawn. In this paper, we introduce a test that takes account of global spatial heterogeneity in assessing local spatial effects. The proposed measure, which we call ‘Local Spatial Dispersion’ (LSD), adapts LOSH to local conditions by omitting global information beyond the range of the local neighbourhood and by keeping the related inferential procedure at a local level. Thereby, the local neighbourhoods might be small and cause small-sample issues. In the view of this, we recommend an empirical Bayesian technique to increase the data that is available for resampling by employing empirical prior knowledge. The usefulness of this approach is demonstrated by applying it to a Light Detection and Ranging-derived data set with height differences and by making a comparison with LOSH. Our results show that LSD is uncorrelated with non-spatial variance as well as local spatial autocorrelation. It thus discloses patterns that would be missed by LOSH or indicators of spatial autocorrelation. Furthermore, the empirical outcomes suggest that interpreting LOSH and LSD together is of greater value than interpreting each of the measures individually. In the given example, local interactions can be statistically detected between variance and spatial patterns in the presence of global structuring, and thus reveal details that might otherwise be overlooked.     

Volatile organic compounds in coastal seawater

The occurence and temporal variations of a variety of low to medium polarity organic compounds in the volatility range bracketed by n-heptane and n-octadecane have been studied in seawater from a station in Vineyard Sound, Massachusetts, and from a tidal creek in Sippewisset Marsh, Massachusetts. The closed-loop vapor phase stripping method of Grob and Zürcher (J. Chromatogr., v. 117, p. 285–294), high resolution glass capillary gas chromatography, and gas chromatography-mass spectrometry were used. Approximately 50 compounds were found at ≥ 2 ng/kg; most were recovered at less than 10 ng/kg, while the 20 ng/kg level was only rarely exceeded by a few components. The total material recovered was 0.2–1.0 μg organic carbon equivalent/kg seawater. The major compound classes found were normal alkanes, alkenes, aromatic and alkylaromatic hydrocarbons, n-aldehydes, dimethyldisulfide and dimethyltrisulfide, and a few halogenated hydrocarbons. The preliminary results suggest that both biogenic and anthropogenic sources were representted. Also, air-sea gas exchange and other physical processes may be important non-biological sinks.     

Hydrogeochemistry and groundwater origin of the Basses-Laurentides sedimentary rock aquifer system, St. Lawrence Lowlands, Québec, Canada

A comprehensive hydrogeochemical study was carried out in the Paleozoic Basses-Laurentides sedimentary rock aquifer system in Québec over a 1500 km² study area. Groundwater samples were collected at 153 sites, characterizing all geological and hydrogeological units to a maximum depth of 140 m. Groundwater was analyzed for major, minor and trace inorganic constituents, stable isotopes δ ²H, δ ¹⁸O, and δ ¹³C of dissolved inorganic carbon (DIC), and some samples were analyzed for ³H, and ¹⁴C of DIC. The regional distribution of groundwater types shows that the hydrogeological conditions exert a dominant control on the major ions chemistry of groundwater. Preferential recharge areas are characterized by tritiated Ca-Mg-HCO₃ groundwater, and confined conditions by submodern Na-HCO₃ and Na-Cl groundwater types. Two groundwater end-members are identified in the aquifer system, modern meteoric water and Pleistocene Champlain Sea water. The region displays significant variations of groundwater geochemistry and quality controlled by glaciation, Champlain Sea invasion, lithological rock diversity, and flow system scales. This situation leads to varied groundwater types and origins within a restricted area.     

Normal moveout in focus1

Improving the accuracy of NMO corrections and of the corresponding interval velocities entails implementing a better approximation than the formula used since the beginning of seismic processing. The exact equations are not practical as they include many unknowns. The approximate expression has only two unknowns, the reflection time and the rms velocity, but becomes inaccurate for large apertures of the recording system and heterogeneous vertical velocities. Several methods of improving the accuracy have been considered, but the gains do not compensate for the dramatic increase in computing time. Two alternative equations are proposed: the first containing two parameters, the reflection time and the focusing time, is not valid for apertures much greater than is the standard formula, but has a much faster computing time and does not stretch the far traces; the other, containing three parameters, the reflection time, like focusing time and the tuning velocity, retains high frequencies for apertures about twice those allowed by the standard equation. Its computing time can be kept within the same limits. NMO equations, old and new, are designed strictly for horizontal layering, but remain reliable as long as the rays travel through the same layers in both the down and up directions. An equation, similar to Dix's formula, is given to compute the interval velocities. The entire scheme can be automated to produce interval-velocity sections without manual picking.     

Modelling the fine-structure of the geoid: Methods,data requirements and some results

The requirements for precise geoid models on local and regional scales have increased in recent years, primarily due to the ongoing developments in height determination by GPS on land, but also due to oceanographic requirements in using satellite altimetry for recovering dynamic sea-surface topography. Suitable methods for geoid computations from gravity data include Stokes integration, FFT methods, and least-squares collocation. Especially the FFT methods are efficient in handling large amounts of gravity data, and new variants of the methods taking earth curvature rigorously into account provide attractive methods for obtaining continental-scale, high-resolution geoid models. The accuracy of such models may be from 2–5 cm locally, to 50–100 cm on regional scales, depending on gravity data coverage, long wave-length gravity field errors, and datum problems. When approaching the cm-level geoid basic geoid definition questions (geoid or quasigeoid?) become very significant, especially in rugged areas. In the paper the geoid modelling methods and problems are reviewed, and some investigations on local data requirements for cm-level geoid prediction are presented. Some actual results are presented from Scandinavia, where a recent regional high-resolution geoid model yields apparent accuracies of 2–10 cm over GPS baselines of 50 to 2000 km.     

Assessing traffic noise impact based on probabilistic and fuzzy approaches under uncertainty

Traffic noise can cause severe sound pollution for human communities. This paper proposes a hybrid approach to assess traffic noise impact under uncertainty. There are many factors influencing traffic noise level, but only three traffic parameters, namely, traffic flow, traffic speed and traffic component, are highly uncertain. These uncertain parameters are represented by probability distributions, and Monte Carlo simulations are performed to generate a noise distribution after considering about other certain influencing factors. Fuzzy set and binary fuzzy relations as well as probability analysis method are applied to identify the predicted traffic noise impacts in qualitatively and quantitatively. The applicability of this proposed technique is demonstrated using a case study.