Tall building vibration control using a TM‐MR damper assembly: Experimental results and implementation

This paper summarizes the relevant results of the design, construction, testing, and implementation of a nominal 120 kN magnetorheological damper developed to control a free‐plan tall building in Santiago, Chile, equipped with two 160‐ton tuned masses. Cyclic as well as hybrid simulation tests were performed on the prototype damper. Global building responses using measured MR properties showed good correlation with analytical estimations. Also, a proposed physical controller for the MR damper was validated through hybrid and building pull‐back tests. Its performance is essentially equivalent to that of an LQR controller, but the information needed in its implementation is considerably less. Pull‐back tests of 10 cm amplitude were performed on one mass along the flexible edge of the building and its response controlled using the passive and controlled modes of the MR damper. The MR damper was capable of controlling the TM displacements very effectively, as well as the simulated building response for different ground motions and harmonic excitation. Copyright © 2010 John Wiley & Sons, Ltd.     

Discretizing the fracture-matrix interface to simulate solute transport

This article examines the required spatial discretization perpendicular to the fracture-matrix interface (FMI) for numerical simulation of solute transport in discretely fractured porous media. The discrete-fracture, finite-element model HydroGeoSphere ( Therrien et al. 2005 ) and a discrete-fracture implementation of MT3DMS ( Zheng 1990 ) were used to model solute transport in a single fracture, and the results were compared to the analytical solution of Tang et al. (1981) . To match analytical results on the relatively short timescales simulated in this study, very fine grid spacing perpendicular to the FMI of the scale of the fracture aperture is necessary if advection and/or dispersion in the fracture is high compared to diffusion in the matrix. The requirement of such extremely fine spatial discretization has not been previously reported in the literature. In cases of high matrix diffusion, matching the analytical results is achieved with larger grid spacing at the FMI. Cases where matrix diffusion is lower can employ a larger grid multiplier moving away from the FMI. The very fine spatial discretization identified in this study for cases of low matrix diffusion may limit the applicability of numerical discrete-fracture models in such cases.     

Multivariate statistical analysis of geochemical data as indicative of the hydrogeochemical evolution of groundwater in a sedimentary rock aquifer system

The study of groundwater hydrogeochemistry of the Paleozoic Basses-Laurentides sedimentary rock aquifer system in Québec produced a large geochemical dataset. Groundwater samples were collected at 153 sites over a 1500 km² study area and analyzed for major and minor ions. The large number of data can lead to difficulties in the integration, interpretation and representation of the results. Two multivariate statistical methods, hierarchical cluster analysis (HCA) and principal components analysis (PCA), were applied to a subgroup of the dataset to evaluate their usefulness to classify the groundwater samples, and to identify geochemical processes controlling groundwater geochemistry. This subgroup consisted of 144 samples and 14 parameters (Ca²⁺, Mg²⁺, Na⁺, K⁺, , Cl⁻, , Fe²⁺, Mn²⁺, Br⁻, Sr²⁺, F⁻, Ba²⁺, HS⁻). Seven geochemically distinct clusters, C1–C7, resulted from the HCA. Samples from clusters C3, C4, C6 and C7 are mostly located in preferential recharge areas. The majority of these samples have Ca–Mg–HCO₃ recharge groundwater (C3, C6, C7) and Na–HCO₃ evolved groundwater (C4). Samples from the other three clusters (C1, C2, C5) are characteristic of an aquifer system under confined conditions. The majority of these samples have Na–HCO₃ evolved groundwater (C1, C5) and Na–Cl ancient groundwater that exhibits elevated concentrations in Br⁻ (C2). In addition to recognizing the importance of hydrogeological conditions on groundwater geochemistry, the distribution of clusters also showed the importance of the geological formations on minor and trace elements, such as Fe²⁺, Mn²⁺, Sr²⁺, F⁻ and Ba²⁺. The first five components of the PCA account for 78.3% of the total variance in the dataset. Component 1 is defined by highly positive loadings in Na⁺, Cl⁻ and Br⁻ and is related to groundwater mixing with Champlain Sea water and solute diffusion from the marine clay aquitard. The high positive loadings in Ca²⁺ and Mg²⁺ of component 2 suggest the importance of dissolution of carbonate rocks in this aquifer system. From their characteristic loadings, the first two components are defined as the “salinity” and “hardness” components, respectively. Components 3–5 are related to more local and geological effects. The integration of the HCA and the PCA, with conventional classification of groundwater types, as well as with the hydrogeological and geological contexts, allowed the division of the region into four main geochemical areas, providing an improved regional picture of the aquifer system dynamics and hydrogeochemical evolution of groundwater. The following factors were recognized as influencing the evolution of groundwater identified in every geochemical area: (1) geological characteristics including sedimentary rock type and till mineralogy; (2) hydrogeological characteristics represented by the level of confinement and the hydraulic gradient; and (3) the geological history including the latest glaciation and the Champlain Sea invasion. With its integrated approach, this hydrogeochemical study contributes to the characterization and understanding of complex groundwater flow systems, and provides an example of the long-term geochemical evolution of hydrogeological systems after a major perturbation, in this case seawater invasion.     

Airborne laser altimetry survey of Glaciar Tyndall, Patagonia

The first airborne laser altimetry measurements of a glacier in South America are presented. Data were collected in November of 2001 over Glaciar Tyndall, Torres del Paine National Park, Chilean Patagonia, onboard a Twin Otter airplane of the Chilean Air Force. A laser scanner with a rotating polygon-mirror system together with an Inertial Navigation System (INS) were fixed to the floor of the aircraft, and used in combination with two dual-frequency GPS receivers. Together, the laser–INS–GPS system had a nominal accuracy of 30 cm after data processing. On November 23rd, a total of 235 km were flown over the ablation area of Glaciar Tyndall, with 5 longitudinal tracks with a mean swath width of 300 m, which results in a point spacing of approximately 2 m both along and across track. A digital elevation model (DEM) generated using the laser altimetry data was compared with a DEM produced from a 1975 map (1:50,000 scale — Instituto Geográfico Militar (IGM), Chile). A mean thinning of − 3.1 ± 1.0 m a^− 1 was calculated for the ablation area of Glaciar Tyndall, with a maximum value of − 7.7 ± 1.0 m a^− 1 at the calving front at 50 m a.s.l. and minimum values of between − 1.0 and − 2.0 ± 1.0 m a^− 1 at altitudes close to the equilibrium line altitude (900 m a.s.l.). The thinning rates derived from the airborne survey were similar to the results obtained by means of ground survey carried out at  600 m of altitude on Glaciar Tyndall between 1975 and 2002, yielding a mean thinning of − 3.2 m a^− 1 [Raymond, C., Neumann, T.A., Rignot, E., Echelmeyer, K.A., Rivera, A., Casassa, G., 2005. Retreat of Tyndall Glacier, Patagonia, over the last half century. Journal of Glaciology 173 (51), 239–247.]. A good agreement was also found between ice elevation changes measured with laser data and previous results obtained with Shuttle Radar Topography Mission (SRTM) data. We conclude that airborne laser altimetry is an effective means for accurately detecting glacier elevation changes in Patagonia, where an ice thinning acceleration trend has been observed during recent years, presumably in response to warming and possibly also drier conditions.     

Melt inclusions in high-An plagioclase from the Gorda Ridge: an example of the local diversity of MORB parent magmas

 The use of ocean floor basalt chemistry as a tool to investigate mantle composition and processes requires that we work with basalts that have been modified little since leaving the mantle. One source of such basalts is melt inclusions trapped in primitive crystals. However, obtaining information from these melt inclusions is complicated by the fact that melt inclusions in natural basalts are essentially always altered by post-entrapment crystallization. This requires that we develop techniques for reconstructing the original trapped liquid compositions. We conducted a series of experiments to reverse the effects of post-entrapment crystallization by re-heating the host crystals to their crystallization temperature. For these experiments we used plagioclase crystals separated from a single Gorda Ridge lava. The crystallization temperature for these crystals was determined by a set of incremental re-heating experiments to be ∼1240–1260° C. The inclusions are primitive, high Ca-Al basaltic melts, saturated with plagioclase, olivine and Al-rich chromite at low pressure. The inclusion analyses can be linked to the host lava composition by low pressure fractionation. The major element composition of the re-homogenized melt inclusions within each crystal is relatively constant. However, the incompatible element analyses have extremely wide ranges. The range of La/Sm and Ti/Zr from inclusions analyzed from a single sample from the Gorda Ridge exceeds the range reported for lavas sampled from the entire ridge. The pyroxene compositions predicted to be in equilibrium with the melt inclusion trace element signature cover much of the range represented by pyroxenes from abyssal peridotites. The volumetric proportions of the magmas entering the base of the crust can be evaluated using frequency distribution of melt inclusion compositions. This distribution suggests that the array of magmas was skewed towards the more depleted compositions, with little evidence for an enriched component in this system. This pattern is more consistent with a dynamic flow model of the mantle or of a passive flow model where the melts produced in the peripheral areas of the melting regime were not focused to the ridge. Received: 5 January 1995 / Accepted: 13 June 1995     

Mineralogy of Erromango lavas (New Hebrides): Evidence of an early stage of fractionation in island arc basalts

The orogenic volcanic rocks of Erromango island are divided into a Quaternary theoleiitic group and an older Pliocene one showing calc-alkalic affinity. The microprobe mineralogy of these lavas agrees with this geochemical distinction and indicates a marked iron enrichment trend in the recent tholeiitic lavas, whereas titanomagnetite occurs as early formed phenocrysts (Al, Cr, Mg-rich) only in Pliocene basalts. Some Ni and Mg-rich olivine phenocrysts (Fo88) and unusual chemically zoned clinopyroxene megacrysts are described from Pliocene basic lavas and interpreted as deep-fractionated minerals. The large compositional range of these latter (diopside core to augite rim, through salite intermediate zone) leads us to discuss the physical conditions and the corresponding cation substitutions prevailing during their formation. Diopside cores crystallized at depths of about 20 km from a relatively ‘primitive’ melt. The formation of salite is considered to be the result of concomitant fractionation of Mg-rich phases and increase of f_O2. An early stage of fractionation of Cr-bearing diopside + Ni-bearing olivine would account for the typical Cr and Ni depletion of Erromango lavas.     

Variable-density groundwater flow and solute transport in porous media containing nonuniform discrete fractures

Variations in fluid density can greatly affect fluid flow and solute transport in the subsurface. Heterogeneities such as fractures play a major role for the migration of variable-density fluids. Earlier modeling studies of density effects in fractured media were restricted to orthogonal fracture networks, consisting of only vertical and horizontal fractures. The present study addresses the phenomenon of 3D variable-density flow and transport in fractured porous media, where fractures of an arbitrary incline can occur. A general formulation of the body force vector is derived, which accounts for variable-density flow and transport in fractures of any orientation. Simulation results are presented that show the verification of the new model formulation, for the porous matrix and for inclined fractures. Simulations of variable-density flow and solute transport are then conducted for a single fracture, embedded in a porous matrix. The simulations show that density-driven flow in the fracture causes convective flow within the porous matrix and that the high-permeability fracture acts as a barrier for convection. Other simulations were run to investigate the influence of fracture incline on plume migration. Finally, tabular data of the tracer breakthrough curve in the inclined fracture is given to facilitate the verification of other codes.     

Decision Analysis for Leachate Control at a Fractured Rock Landfill

The municipal landfill at the Complexe Environnemental de Saint-Michel (CESM) in Montreal, which is the third largest in North America, is located in a former quarry in fractured limestone. Impressive measures are taken to monitor and control biogas and leachate generated at the site. Leachate containment is presently performed with a pumping well completed within the waste. The efficiency of the well in controlling off-site leachate migration is questioned because field observations strongly suggest that the nearby former Francon quarry is diverting local ground water flow. To address this issue, four additional hydraulic control options are considered: (1) increased pumping at the existing waste well; (2) new pumping wells in the rock on the eastern limit of the site; (3) new injection wells in the rock on the eastern limit; and (4) combination of new injection wells at the same location and new water supply wells upgradient of the landfill. We evaluated the four hydraulic control options at the CESM using two coupled models: (1) a decision model based on an objective function weighting the risk, costs, and benefits of each option translated into dollar units; and (2) a numerical ground water flow model to represent the effect of operational conditions and ascertain success. Decision analysis offers a quantitative unbiased tool to evaluate the potential and relative cost of each option, but qualitative considerations and judgment still must be used for a complete evaluation. Our analysis confirms that scenario 4, which was the intuitively favored option, represents the best containment strategy.