AGNs,X-ray background and the possible candidates for great attractor

In the five last years, different structures (density excess 1) have been proposed as the direct cause of our infall toward the direction of Hydra—Centaurus with a velocity of 500 km s^–1. The direct effect of the mentioned matter accumulations on the X-ray background (XRB) can be estimated as a function of the geometry of the structures and of the cosmological evolution of the sources emitting in the X-ray band (2–10 keV) for different universes (₀1). If the XRB comes mostly from AGNs with low luminosity (L _X <10⁴³ erg s^–1 and, therefore, they will have a weak cosmological evolution) and we consider the difference between the intensities coming from both hemispheres (that oriented toward the direction of our motion and the opposite one) obtained by means of different satellites, we can conclude that some candidates are highly unlikely.Paper presented at the 11th European Regional Astronomical Meetings of the IAU on New Windows to the Universe, held 3–8 July, 1989, Tenerife, Canary Islands, Spain     

A combined study of macroseismic data and focal mechanisms applied to the West-Bohemian earthquake,Czechoslovakia

The main shock of the West-Bohemian earthquake swarm, Czechoslovakia, (magnitudem=4.5, depthh=10 km) exhibits an irregular areal distribution of macroseismic intensities 6° to 7° MSK-64. Four lobes of the 6° isoseismal are found and the maximum observed intensity is located at a distance of 8 km from the instrumentally determined epicentre. This distribution can be explained by the energy flux of the directS wave generated by a circular source, the hypocentral location and focal mechanism of which are taken from independent instrumental studies. The theoretical intensity, which is assumed to be logarithmically proportional to the integrated squared ground-motion velocity (i.e.,I=const+log v ² (t)dt), fits the observed intensity with an overall root-mean-square error less than 0.5°. It is important that the present intensity data can also be equally well explained by the isotropic source. The fit was attained by means of a horizontally layered model though large fault zones and an extended sedimentary basin suggest a significant lateral heterogeneity of the epicentral region. The results encourage a broader application of the simple modelling technique used.     

On the structure of Saturn's rings and the ‘real’ rotational period for the planet

An analysis of the Lowell Observatory photographic plates of Saturn gave the following results: (1) ring A and B show peculiar brightness distributions around the planet, from which we conclude that both are composed of particles in synchronous rotation. (2) The leading side of the particles in ring A is brighter than the trailing side by about 4%, which may indicate an interaction between such particles and the interplanetary medium. (3) Scans of the rings across the major axis show a small (～0.3″) region of enhanced brightness, from which we derive a value ofT _s =10^h13 _. ^m 8±5 _. ^m 4 for the actual planetary rotational period of Saturn. (4) In order to explain the synchronous rotation, the particles in ring A have to be at least 42 m in diameter.     

Natural attenuation and bioremediation of Prestige fuel oil along the Atlantic coast of Galicia (Spain)

Heavy fuel oil spilled from the oil tanker Prestige in November 2002 affected hundreds of km of Spanish shoreline. We carried out a two year study at two highly contaminated sites in order to monitor natural attenuation of the residues coating shore rocks and to test the effectiveness of bioremediation with an oleophilic fertilizer (S200). The methodology included an innovative approach for oil load calculation (based on image analysis techniques), the analysis of the fate of hydrocarbons by means of chemical biomarkers and different microbiological techniques for isolating and examining hydrocarbon degraders.Considerable hydrocarbon depletion from shorelines (≈100% for light-medium linear alkanes and ≈35% for aromatics such as pyrene) was observed within the first months after the spill. However, this natural attenuation effect dramatically slowed down in the following year, although partial enhancement (especially for the aromatic fraction) was attained as a result of the application of S200 to stimulate indigenous microorganisms. In addition, one of the main outcomes of this work concerns the remarkable hydrocarbon depletion achieved at points where fresh water flowed through the shore rocks. The study of samples collected where this natural attenuation phenomenon took place made it possible to isolate heterotrophic bacteria and fungi that are likely to cooperate with cyanobacteria in hydrocarbon biodegradation. The overall results strongly advocate the implementation of new bioremediation approaches, including alternatives such as the use of natural fresh water to irrigate polluted areas.     

Study of geothermal water intrusion due to groundwater exploitation in the Puebla Valley aquifer system, Mexico

Significant intrusion of geothermal water into fresh groundwater takes place in the Puebla Valley aquifer system, Mexico. The decline in the potentiometric surface due to the overexploitation of the groundwater induces this intrusion. This hydrological system comprises three aquifers located in Plio-Quaternary volcanic sediments and Mesozoic calcareous rocks. The hydraulic balance of the aquifer shows that the annual output exceeds the natural inputs by 12 million m³. Between 1973 and 2002, a drop in the potentiometric surface, with an 80 m cone of depression, was identified in a 5-km-wide area located southwest of the city of Puebla. Chemical analyses performed on water samples since 1990 have shown an increase in total dissolved solids (TDS) of more than 500 mg/L, coinciding with the region showing a cone of depression in the potentiometric surface. A three-dimensional flow and transport model, based on the hydrogeological and geophysical studies, was computed by using the MODFLOW and MT3D software. This model reproduces the evolution of the aquifer system during the last 30 years and predicts for 2010 an additional drawdown in the potentiometric surface of 15 m, and an increase in the geothermal water intrusion.     

Catastrophic debris flows near Machu Picchu village (Aguas Calientes), Peru

Slope movements together with intensive river erosion and the following accumulation are the leading processes in the landscape evolution in the area of Machu Picchu village (former Aguas Calientes), which is located close to the Machu Picchu Sanctuary. Debris flows affect not only the bottoms of valleys or canyons, but also debris fans at the termini of the drainage basins, which are heavily inhabited at some places. The most recent event in the Machu Picchu village occurred in April 2004, but several others were documented in a broader area in the last 50 years. The field inspections at Machu Picchu (May and September 2004; June and September 2005) together with oral testimony revealed the nature and behavior of the debris flow. Machu Picchu village can be assessed as a zone with high landslide risk in relation to its urban development. Despite that, the village recorded a rapid growth (threefold population increase) without urban control within the past two decades. Precipitation, which is the main triggering factor of the debris flows, and natural hazard management of the Machu Picchu village are discussed in this paper.     

The Spačice eclogite: constraints on the P–T–t history of the Gföhl granulite terrane, Moldanubian Zone, Bohemian Massif

Summary In the Kutná Hora Complex, the Běstvina Formation, which is similar to Gf?hl granulite, contains eclogite that has escaped widespread retrograde recrystallization. The eclogite assemblage, garnet + omphacite + quartz + rutile ± plagioclase, yields an estimate for peak metamorphic conditions of 18–20 kbar and 835–935 °C, which is comparable to that determined from felsic granulite, 14–20 kbar and 900–1000 °C. Garnet in eclogite exhibits both prograde and retrograde compositional zoning, from which constraints on thermal history of the Gf?hl terrane can be derived by diffusion modelling. At 900 °C, a garnet grain of 800–1000 μm radius would homogenize in 7.5–11.7 million years, but the existence of compositional gradients on a length scale of 100–200 μm suggests that the duration of peak metamorphism may have been limited to ∼500,000 years. Diffusion modelling of retrograde zoning in garnet yields a cooling rate of 150–100 °C/m.y. for a radius of 800–1000 μm and initial temperature of 900 °C. The relatively brief duration of high-pressure/high-temperature metamorphism and rapid cooling and exhumation of the Gf?hl terrane may be a consequence of lithospheric delamination during Early Carboniferous collision of Bohemia (Teplá-Barrandia) and Moldanubia (Franke, 2000).     

Factors influencing the presence or absence of tributary-junction fans in the Iberian Range, Spain

This paper analyses the factors which influence the presence or absence of tributary-junction fans in the Iberian Range, northern Spain. Two valleys were selected, both characterised by wide variations in lithology, altitude, land use and plant cover. Two groups of factors were studied: those related to the internal characteristics of the drainage basins, which particularly control sediment generation; and those related to the characteristics of the depositional area which control accommodation space and main river power. Among the internal factors, the development of alluvial fans was related to: (i) the capacity of the basin to yield large volumes of sediment, (ii) the occurrence of intense human pressure until recent times, a good indicator of sediment yield, and (iii) the capacity of the basin to quickly increase discharge during rainstorms (discharge density and torrentiality). It is suggested that the areas that were intensively cultivated in the past, and have therefore been affected by intense erosion, have played a decisive role on the development of alluvial fans. This would imply that many of these alluvial fans have a relatively recent origin, perhaps related to the beginning of a widespread deforestation. The basins without alluvial fans are characterised by relatively steep hillslope gradients (that is, slopes that never were subjected to historical cultivation), low drainage densities and dense forest and shrub cover, mostly coinciding with high altitude basins composed of quartzite and shale bedrocks. Regarding the external factors, the shape, size and longitudinal gradient of the main river to which the fans are tributary are the most relevant conditioning factors determining the development of alluvial fans.     

Avalanche Risk During Backcountry Skiing – An Analysis of Risk Factors

Skier-triggered avalanches are the main cause of avalanche accidents in backcountry skiing. The risk of accidents during backcountry skiing was analysed statistically and related to factors such as elevation level, aspect, stability rating and the time of the year. The analysis is based on a database about terrain usage and avalanche accidents from a large heli-skiing operator in Canada, which makes it possible to study the conditional probability of accidents given the recorded pattern of terrain usage. This study shows that the historical risk of accidentally triggering an avalanche greater than size 1 depends highly on the stability rating, with the highest risk occurring during “poor” stability. The risk is greater at high elevations, and it is lower during the late season than earlier on. Skier risk does not depend as much on aspect as may be indicated from avalanche data alone. However, it is relatively high in the N–NE–E sector. These factors are not independent of each other and therefore analyses of combined factors were also performed. Questionnaires and interviews were used to gain knowledge about the terrain selection of professional mountain guides. These results indicate that when selecting terrain, guides first look at the overall shape and size of the terrain, but avalanche history of terrain and inclination are also important factors. Finally, remarks in avalanche reports were analysed, and common human factors identified.     

Effect of sampling and linkage on fault length and length–displacement relationship

The power-law exponent (n) in the equation: D=cL ⁿ , with D = maximum displacement and L = fault length, would be affected by deviations of fault trace length. (1) Assuming n=1, numerical simulations on the effect of sampling and linkage on fault length and length–displacement relationship are done in this paper. The results show that: (a) uniform relative deviations, which means all faults within a dataset have the same relative deviation, do not affect the value of n; (b) deviations of the fault length due to unresolved fault tip decrease the values of n and the deviations of n increase with the increasing length deviations; (c) fault linkage and observed dimensions either increase or decrease the value of n depending on the distribution of deviations within a dataset; (d) mixed deviations of the fault lengths are either negative or positive and cause the values of n to either decrease or increase; (e) a dataset combined from two or more datasets with different values of c and orders of magnitude also cause the values of n to deviate. (2) Data including 19 datasets and spanning more than eight orders of fault length magnitudes (10⁻²–10⁵ m) collected from the published literature indicate that the values of n range from 0.55 to 1.5, the average value being 1.0813, and the peak value of n _d (double regression) is 1.0–1.1. Based on above results from the simulations and published data, we propose that the relationship between the maximum displacement and fault length in a single tectonic environment with uniform mechanical properties is linear, and the value of n deviated from 1 is mainly caused by the sampling and linkage effects.