Floodgate Operations and Fish Communities in Tidal Creeks of the Lower Fraser River (British Columbia,Canada)

Tidal creeks in large coastal deltas can be important habitat for fish but are often highly modified by human activities. Connectivity between tributary creeks and mainstem channels is often constrained by structures such as dikes and floodgates, designed to protect urban and agricultural areas from flooding. While they play important roles in flood mitigation, floodgates can diminish habitat quality and block fish from accessing tidal creeks. It is likely that floodgates differ in their operations and may consequently open for different amounts of time; however, floodgate operations and their effects are not well quantified. We asked the question: how does the mechanical functioning of these floodgates affect fish communities in tidal creeks? We used time-lapse cameras and quantified the timing of gate openings for 22 tributaries of the Lower Fraser River in British Columbia, Canada, and related these operational data to differences in fish communities above and below floodgates. Floodgate operations varied substantially, with some floodgates opening daily while others opened less than 20% of the day, on average. Sites with floodgates that seldom opened were associated with greater differences in fish communities and with reduced upstream native species richness by about one species on average. Where floodgates opened infrequently, we also found lower upstream dissolved oxygen concentrations than at sites where floodgates opened for longer periods of time. Thus, floodgate operations can influence fish communities as well as water quality. These data indicate a large scope for improving floodgate operations for connectivity.     

New density measurements on carbonate liquids and the partial molar volume of the CaCO<Subscript>3</Subscript> component

Density measurements on nine liquids in the CaCO₃–Li₂CO₃–Na₂CO₃–K₂CO₃ quaternary system were performed at 1 bar between 555 and 969 °C using the double-bob Archimedean method. Our density data on the end-member alkali carbonate liquids are in excellent agreement with the NIST standards compiled by Janz (1992). The results were fitted to a volume equation that is linear in composition and temperature; this model recovers the measured volumes within experimental error (±0.18% on average, with a maximum residual of ±0.50%). Our results indicate that the density of the CaCO₃ component in natrocarbonate liquids is 2.502 (±0.014) g/cm³ at 800 °C and 1 bar, which is within the range of silicate melts; its coefficient of thermal expansion is 1.8 (±0.5)×10^–4 K^–1 at 800 °C. Although the volumes of carbonate liquids mix linearly with respect to carbonate components, they do not mix linearly with silicate liquids. Our data are used with those in the literature to estimate the value of in alkaline silicate magmas (20 cm³/mol at 1400 °C and 20 kbar), where CO₂ is dissolved as carbonate in close association with Ca. Our volume measurements are combined with sound speed data in the literature to derive the compressibility of the end-member liquids Li₂CO₃, Na₂CO₃, and K₂CO₃. These results are combined with calorimetric data to calculate the fusion curves for Li₂CO₃, Na₂CO₃, and K₂CO₃ to 5 kbar; the calculations are in excellent agreement with experimental determinations of the respective melting reactions.Editorial responsibility: I Carmichael     

Direct measurements of latent heat during crystallization and melting of a ugandite and an olivine basalt

Step-scanning calorimetric measurements using a Setaram HT1500 calorimeter were performed between 800 and 1400°C on two natural samples: a ugandite from the East African rift and an olivine basalt from the western Mexican arc. Our measurements provide the first in-situ quantitative assessment of enthalpy during melting of initially crystalline natural samples. The distribution of latent heat across the liquidus-solidus intervals of the two samples is distinctly different, reflecting significant variation in the sequence and abundance of mineral phases during melting (clinopyroxene and leucite in the ugandite; olivine, clinopyroxene, and plagioclase in the basalt). Our data further indicate that the common assumption of a uniform distribution of latent heat across the liquidus-solidus interval of a magma is a reasonable approximation for the olivine basalt, but is grossly in error for the ugandite. This is due to cotectic precipitation of leucite and clinopyroxene, leading to a large, disproportionate release of latent heat early in the crystallization sequence. The implication for the thermal history of a crystallizing ugandite magma is that therate of heat loss during conductive cooling will unitially be more rapid than the average rate. The net result will be to produce lower magmatic temperatures after a given cooling interval relative to models assuming a uniform release of latent heat. An additional series of scanning calorimetric experiments were performed at variable rates (1,2 and 3°/min) to evaluate the role of kinetics on the distribution of enthalpy during both melting and crystallization of the ugandite and olivine basalt. The results indicate that clinopyroxene is the most important mineral phase in controlling the shapes of the enthalpy profiles during cooling; this is due to its large enthalpy of fusion and its tendency for sluggish nucleation, followed by rapid crystallization at temperatures that vary with cooling rate. The resolution of the calorimeter (in terms of heat detected per unit time) is also important in determining the shapes of theobserved enthalpy profiles during these rapid scans. Estimates based on the observed calorimetric signal associated with melting of olivine, and the lack of a calorimetric signal during melting of leucite, combined with known enthalpies of fusion for the two phases, indicate detection limits of approximately 0.6–1.2 kJ per 5 min increments.     

The influence of solar‐induced thermal stresses on the mechanical weathering of rocks in humid mid‐latitudes

The role of solar‐induced thermal stresses in the mechanical breakdown of rock in humid‐temperate climates has remained relatively unexplored. In contrast, numerous studies have demonstrated that cracks in rocks found in more arid mid‐latitude locations exhibit preferred northeast orientations that are interpreted to be a consequence of insolation‐related cracking. Here we hypothesize that similar insolation‐related mechanisms may be efficacious in humid temperate climates, possibly in conjunction with other mechanical weathering processes. To test this hypothesis, we collected rock and crack data from a total of 310 rocks at a forested field site in North Carolina (99 rocks, 266 cracks) and at forested and unforested field sites in Pennsylvania (211 rocks, 664 cracks) in the eastern United States. We find that overall, measured cracks exhibit statistically preferred strike orientations (47° ± 16), as well as dip angles (52° ± 24°), that are similar in most respects to comparable datasets from mid‐latitude deserts. There is less variance in strike orientations for larger cracks suggesting that cracks with certain orientations are preferentially propagated through time. We propose that diurnally repeating geometries of solar‐related stresses result in propagation of those cracks whose orientations are favorably oriented with respect to those stresses. We hypothesize that the result is an oriented rock heterogeneity that acts as a zone of weakness much like bedding or foliation that can, in turn, be exploited by other weathering processes. Observed crack orientations vary somewhat by location, consistent with this hypothesis given the different latitude and solar exposure of the field sites. Crack densities vary between field sites and are generally higher on north‐facing boulder‐faces and in forested sites, suggesting that moisture‐availability also plays a role in dictating cracking rates. These data provide evidence that solar‐induced thermal stresses facilitate mechanical weathering in environments where other processes are also likely at play. Copyright © 2015 John Wiley & Sons, Ltd.     

Local Groundwater Withdrawal Permitting Laws in the South‐Western U.S.: California in Comparative Context

The Sustainable Groundwater Management Act (SGMA) aims to control, for the first time in California's history, the state's significant use and depletion of groundwater. SGMA gives local agencies a high degree of discretion in relation to a new permitting power, but the discretion is a double‐edged sword: agencies gain maximum flexibility to tailor their regime to local conditions, yet the statute provides no direction on appropriate components of a groundwater permitting regime. We introduce SGMA and the broader legislative context to its permitting power, and we explain the continuing common law context in which the legislation operates. This information is used as the foundation for a comparative legal analysis of fundamental elements of permitting regimes. We compare a selection of six other south‐western permitting regimes established in legislation for areas recognized as requiring intensive management through permitting: “special permitting areas” (SPAs). We find that permitting regimes in south‐western SPAs share a structure containing several almost universal elements, although the policy settings that apply to those elements vary widely. The established permitting regimes in the other south‐western states' SPAs may inform Californian agencies seeking to use their new permitting power for the first time, as well as water agencies further afield, as to important components of a permitting regime, and the different policy settings that could apply to those components. Californian local agencies, and its Department of Water Resources, which is charged with providing local agencies technical advice, should have regard to these permitting possibilities.     

Flexure of the Indian plate and intraplate earthquakes

The flexural bulge in central India resulting from India's collision with Tibet has a wavelength of approximately 670 km. It is manifest topographically and in the free-air gravity anomaly and the geoid. Calculations of the stress distribution within a flexed Indian plate reveal spatial variations throughout the depth of the plate and also a function of distance from the Himalaya. The wavelength (and therefore local gradient) of stress variation is a function of the effective elastic thickness of the plate, estimates of which have been proposed to lie in the range 40–120 km. The imposition of this stress field on the northward moving Indian plate appears fundamental to explaining the current distribution of intraplate earthquakes and their mechanisms. The current study highlights an outer trough south of the flexural bulge in central India where surface stresses are double the contiguous compressional stresses to the north and south. The Bhuj, Latur and Koyna earthquakes and numerous other recent reverse faulting events occurred in this compressional setting. The N/S spatial gradient of stress exceeds 2 bars/km near the flexural bulge. The overall flexural stress distribution provides a physical basis for earthquake hazard mapping and suggests that areas of central India where no historic earthquakes are recorded may yet be the locus of future damaging events.     

Intraspecific Variation in Growth of Marsh Macrophytes in Response to Salinity and Soil Type: Implications for Wetland Restoration

Genetic diversity within plant populations can influence plant community structure along environmental gradients. In wetland habitats, salinity and soil type are factors that can vary along gradients and therefore affect plant growth. To test for intraspecific growth variation in response to these factors, a greenhouse study was conducted using common plants that occur in northern Gulf of Mexico brackish and salt marshes. Individual plants of Distichlis spicata, Phragmites australis, Schoenoplectus californicus, and Schoenoplectus robustus were collected from several locations along the coast in Louisiana, USA. Plant identity, based on collection location, was used as a measure of intraspecific variability. Prepared soil mixtures were organic, silt, or clay, and salinity treatments were 0 or 18 psu. Significant intraspecific variation in stem number, total stem height, or biomass was found in all species. Within species, response to soil type varied, but increased salinity significantly decreased growth in all individuals. Findings indicate that inclusion of multiple genets within species is an important consideration for marsh restoration projects that include vegetation plantings. This strategy will facilitate establishment of plant communities that have the flexibility to adapt to changing environmental conditions and, therefore, are capable of persisting over time.