Ore transport and deposition in the Red Sea geothermal system: a geochemical model

Thermodynamic calculation of distribution of dissolved aqueous species in the Red Sea geothermal brine provides a model of ore transport and deposition in good agreement with observed accumulations of base metal sulfides, anhydrite, and barite.The Red Sea brine is recirculated seawater that acquires high salinity by low-temperature interaction with Miocene evaporites and is subsequently heated to temperatures in excess of 200°C by interaction with recent rift zone intrusive rocks. At temperatures up to 250°C, NaSO^?₄ and MgSO⁰₄ are the dominant sulfur-bearing species. H₂S forms by inorganic sulfate reduction at the higher temperatures but is maintained at a uniform concentration of about 2 ppm by the strength of the sulfate complexes.Chloride complexes solubilize metals at the higher temperatures, and thus sulfide and metals are carried together into the Atlantis II Deep. Below 150°C, the brine becomes supersaturated with respect to chalcopyrite, sphalerite, galena, and iron monosulfide due to chloride-complex dissociation. Sulfide precipitation rates, based on the rate of brine influx, are in good agreement with measured sedimentation rates. Anhydrite precipitates as crystalline fissure infillings from high-temperature inflowing brine. Barite forms from partial oxidation of sulfides at the interface between the lower hot brine and the transitional brine layer.     

Structural variations in derivatives of the bacteriochlorophylls of Chlorobiaceae: impact of stratigraphic resolution on depth profiles as revealed by methanolysis

Bacteriochlorophylls c and d, recovered from two sedimentary sequences, were converted to bacteriophaeophorbide methyl esters by methanolysis and analysed by atmospheric pressure chemical ionisation liquid chromatography-multistage mass spectrometry (APCI LC-MSⁿ). The distributions in both settings, a moderately consolidated sediment from Kirisjes Pond, Antarctica, and in a finely laminated microbial mat from Les Salines de la Trinitat, Spain, show significant variations within a narrow depth interval. The overall bacteriophaeophorbide c to d ratios in the two sediments are different, as are the ratios of particular C-3¹ diastereoisomers, indicating distinct differences between the bacterial communities that contributed to each sediment. Furthermore, a shift towards more extensive alkylation in homologues within each sediment is consistent either with changing environmental conditions in the depositional environments, or development-related changes in the structure of the bacterial community, leading to increased competition for light or nutrients.     

Geochemistry and petrography of basalt grindstones from the Karak Plateau,central Jordan

Seventeen basalt grindstone fragments from central Jordan's Karak Plateau were studied. Most of these artifacts are vesicular or amygdaloidal with calcite as the dominant mineral filling the voids. The major minerals are olivine (with iddingsite rims), plagioclase, clinopyroxene, magnetite, and apatite. Glass is present in some samples. One basalt fragment is quite different in appearance and composition and may have come from flows closer to the Dead Sea. Grindstone fragment compositions plot in the tephrite‐basanite and basalt fields. A plot of the concentrations of niobium, zirconium, and yttrium reveal that the sample compositions plot in the “within‐plate alkali basalt” and “within‐plate tholeiite” fields. The acquisition of basalts for preparing such implements appears to have been random. Some may have been introduced through trade and migration. Archaeological and environmental studies on the Karak Plateau are urgently needed because Jordan's population growth and economic development are destroying many sites and their environmental contexts. © 2004 Wiley Periodicals, Inc.     

Temporal evolution of backward erosion piping in small-scale experiments

Backward erosion piping (BEP) is a form of internal erosion which can lead to failure of levees and dams. Most research focused on the critical head difference at which piping failure occurs. Two aspects have received less attention, namely (1) the temporal evolution of piping and (2) the local hydraulic conditions in the pipe and at the pipe tip. We present small-scale experiments with local pressure measurements in the pipe during equilibrium and pipe progression for different sands and degrees of hydraulic loading. The experiments confirm a positive relation between progression rate and grain size as well as the degree of hydraulic overloading. Furthermore, the analysis of local hydraulic conditions shows that the rate of BEP progression can be better explained by the bed shear stress and sediment transport in the pipe than by the seepage velocity at the pipe tip. The experiments show how different processes contribute to the piping process and these insights provide a first empirical basis for modeling pipe development using coupled seepage-sediment transport equations.

     

Trace metals and radionuclides reveal sediment sources and accumulation rates in Jordan Cove, Connecticut

Many small estuaries are influenced by flow restrictions resulting from transportation rights-of-way and other causes. The biogeochemical functioning and history of such systems can be evaluated through study of their sediments. Ten long and six short cores were collected from the length of Jordan Cove, Connecticut, a Long Island Sound subestuary, and analyzed for stratigraphy, radionuclides (¹⁴C, ²¹⁰Pb, ²²⁶Ra, ¹³⁷Cs, and ⁶⁰Co), and metals (Ag, Cd, Cu, Pb, Zn, Fe, and Al). For at least 3,800 yr, rising sea level has gradually inundated Jordan Cove, filling it with mud similar to that currently being deposited there. Long-term sediment accumulation in the cove averaged close to 0.1 cm yr⁻¹ over the last three millennia. Recent sediment accumulation rates decrease inland from 0.84 cm yr⁻¹ to 0.40 cm yr⁻¹, and are slightly faster than relative sea-level rise at this site (0.3 cm yr⁻¹). Similarity of depth distributions of trace metals was used to confirm relative sediment accumulation rates. ⁶⁰Co and Ag are derived from sources outside the cove and its watershed, presumably the Millstone nuclear power plant and regional contaminated sediments, respectively. The combined data suggest that Long Island Sound is an important source of sediment to the cove; a minor part of total sediment is supplied from the local watershed. Trace metal levels are strongly correlated with Fe but not with either organic matter or Al. Sediment quality has declined in the cove over the past 60 yr, but only slightly. Cu, Pb, and Zn data correlate strongly with Fe but not with either organic matter or aluminum. Ratios of Ag to Fe and to trace metals suggest that Ag in the cove is derived almost entirely from Long Island Sound. This result supports the notion that Fenormalized Ag can serve as a better tracer of some kinds of contamination than more common and abundant metals, like Cu, Pb, and Zn. *** DIRECT SUPPORT *** A01BY085 00008     

Volatile-induced transport of HFSE, REE, Th and U in arc magmas: evidence from zirconolite-bearing vesicles in potassic lavas of Lewotolo volcano (Indonesia)

Potassium-rich calc-alkaline lavas of Lewotolo volcano, situated in the East Sunda Arc, Indonesia, contain the rare mineral zirconolite (CaZrTi₂O₇). Samples in which tiny grains of this mineral (3–25 μm in size) were found span the entire range of lava compositions (47–62 wt% SiO₂). To the best of our knowledge, this is the first record of primary zirconolite in juvenile arc volcanics. The mineral forms part of a vesicle-filling assemblage consisting of a network of quenched feldspar crystals and an SiO₂ phase, probably cristobalite. High contents of Th, U and REE (up to 9.3, 4.3 and 15.6 wt% oxide respectively) and very high Fe contents (up to 13.5 wt% Fe₂O₃) distinguish these zirconolites from those of other rock types. The extraction of volatile-rich phases with changing compositions in successive stages is considered to be responsible for the zirconolite formation. We hypothesise that a fluid capable of transporting HFSE, REE, Th and U was extracted from the magma and (partly) crystallised within voids which had formed earlier upon saturation of an aqueous fluid. Assuming that zirconolite compositions largely reflect trace metal contents of the coexisting fluid phase, significant amounts of `immobile' elements must have been transported on a macroscopic scale. Our findings thus point to a late-stage transfer of HFSE, REE, Th and U between different domains in a cooling magma body. Such a volatile-induced redistribution of trace elements at shallow levels of high-K volcanic systems may be significant for conventional geochemical modelling of magma evolution and for Th–U disequilibrium studies. Received: 3 November 1999 / Accepted: 29 February 2000     

Revisiting the death of geography in the era of Big Data: the friction of distance in cyberspace and real space

Many scholars have argued that the importance of geographic proximity in human interactions has been diminished by the use of the Internet, while others disagree with this argument. Studies have noted the distance decay effect in both cyberspace and real space, showing that interactions occur with an inverse relationship between the number of interactions and the distance between the locations of the interactors. However, these studies rarely provide strong evidence to show the influence of distance on interactions in cyberspace, nor do they quantify the differences in the amount of friction of distance between cyberspace and real space. To fill this gap, this study used massive amounts of social media data (Twitter) to compare the influence of distance decay on human interactions between cyberspace and real space in a quantitative manner. To estimate the distance decay effect in both cyberspace and real space, the distance decay function of interactions in each space was modeled. Estimating the distance decay in cyberspace in this study can help predict the degree of information flow across space through social media. Measuring how far ideas can be diffused through social media is useful for users of location-based services, policy advocates, public health officials, and political campaigners.     

Practical Postcalibration Uncertainty Analysis: Yucca Mountain, Nevada

The values of parameters in a groundwater flow model govern the precision of predictions of future system behavior. Predictive precision, thus, typically depends on an ability to infer values of system properties from historical measurements through calibration. When such data are scarce, or when their information content with respect to parameters that are most relevant to predictions of interest is weak, predictive uncertainty may be high, even if the model is "calibrated." Recent advances help recognize this condition, quantitatively evaluate predictive uncertainty, and suggest a path toward improved predictive accuracy by identifying sources of predictive uncertainty and by determining what observations will most effectively reduce this uncertainty. We demonstrate linear and nonlinear predictive error/uncertainty analyses as applied to a groundwater flow model of Yucca Mountain, Nevada, the United States' proposed site for disposal of high-level radioactive waste. Linear and nonlinear uncertainty analyses are readily implemented as an adjunct to model calibration with medium to high parameterization density. Linear analysis yields contributions made by each parameter to a prediction's uncertainty and the worth of different observations, both existing and yet-to-be-gathered, toward reducing this uncertainty. Nonlinear analysis provides more accurate characterization of the uncertainty of model predictions while yielding their (approximate) probability distribution functions. This article applies the above methods to a prediction of specific discharge and confirms the uncertainty bounds on specific discharge supplied in the Yucca Mountain Project License Application.     

Generalized Born scattering of elastic waves in 3-D media

It is well known that when a seismic wave propagates through an elastic medium with gradients in the parameters which describe it (e.g. slowness and density), energy is scattered from the incident wave generating low-frequency partial reflections. Many approximate solutions to the wave equation, e.g. geometrical ray theory (GRT), Maslov theory and Gaussian beams, do not model these signals. The problem of describing partial reflections in 1-D media has been extensively studied in the seismic literature and considerable progress has been made using iterative techniques based on WKBJ, Airy or Langer type ansätze. In this paper we derive a first-order scattering formalism to describe partial reflections in 3-D media. The correction term describing the scattered energy is developed as a volume integral over terms dependent upon the first spatial derivatives (gradients) of the parameters describing the medium and the solution. The relationship we derive could, in principle, be used as the basis for an iterative scheme but the computational expense, particularly for elastic media, will usually prohibit this approach. The result we obtain is closely related to the usual Born approximation, but differs in that the scattering term is not derived from a perturbation to a background model, but rather from the error in an approximate Green's function. We examine analytically the relationship between the results produced by the new formalism and the usual Born approximation for a medium which has no long-wavelength heterogeneities. We show that in such a case the two methods agree approximately as expected, but that in a media with heterogeneities of all wavelengths the new gradient scattering formalism is superior. We establish analytically the connection between the formalism developed here and the iterative approach based on the WKBJ solution which has been used previously in 1-D media. Numerical examples are shown to illustrate the examples discussed.