H2S Emissions from a Submerged Pilot‐Scale Fixed Bed Biofilm Reactor

A study was performed in two submerged, pilot‐scale biofilm bioreactors operated under different conditions to determine the relationship between the operating parameters and H₂S emission. H₂S was always detected in the exhaust air at concentrations varying from 1 to 353 ppm_v. The specific aeration rate was the most influencing parameter, with As < 30 kg COD (dissolved oxygen concentrations <4 mg L^?1) increasing noticeably the H₂S production. The periodical removal of the accumulated sludge reduced H₂S emissions by ～14%.     

An approach for valid covariance estimation via the Fourier series

The use of kriging for construction of prediction or risk maps requires estimating the dependence structure of the random process, which can be addressed through the approximation of the covariance function. The nonparametric estimators used for the latter aim are not necessarily valid to solve the kriging system, since the positive-definiteness condition of the covariance estimator typically fails. The usage of a parametric covariance instead may be attractive at first because of its simplicity, although it may be affected by misspecification. An alternative is suggested in this paper to obtain a valid covariance from a nonparametric estimator through the Fourier series tool, which involves two issues: estimation of the Fourier coefficients and selection of the truncation point to determine the number of terms in the Fourier expansion. Numerical studies for simulated data have been conducted to illustrate the performance of this approach. In addition, an application to a real environmental data set is included, related to the presence of nitrate in groundwater in Beja District (Portugal), so that pollution maps of the region are generated by solving the kriging equations with the use of the Fourier series estimates of the covariance.     

Development of an innovative seismic strengthening technique for traditional load-bearing masonry walls

Traditional non-reinforced masonry walls are particularly prone to failure when subjected to out-of-plane loads and displacements caused by earthquakes. Moreover, singularities such as openings in fa?ades may trigger local collapse, for either in-plane or out-of plane motion. Bearing in mind all the former limitations, STAP, with the scientific support of ICIST and LNEC, has been developing a reduced intrusiveness seismic strengthening methodology for traditional masonry structures. The technique consists in externally applying Glass Fibre Reinforced Polymer (GFRP) composite strips to one or both faces of walls. Connection between GFRP composite strips and masonry substrate is enhanced through specifically detailed anchorages or confinement connectors. This technique has been developed and studied through an extensive series of experimental tests, which are briefly reviewed. This paper focuses more deeply on the latest experimental program, aimed at the characterization of the masonry-GFRP composite interface behaviour. This testing program comprised 29 masonry specimens, strengthened with externally bonded GFRP composite strips with anchorages. The testing variables were the number and spacing of anchorages as well as the loading history type: monotonic or repeated. Results clearly show that the use of anchorages dramatically enhances bond behaviour and that its number and spacing have a significant effect on deformation capacity and a less pronounced effect on strength. Based on experimental evidence, this paper also provides a calculation model and ULS safety assessment procedure for out-of-plane strength of reinforced masonry walls. This calculation model leads to interaction curves on strengthened masonry walls subjected to compression and out-of-plane flexure.     

Modern analogues and the early history of microbial life

Revealing the geological history of microbial life is very challenging. Microbes rarely are preserved with morphological fidelity, and even when they are, morphology is a poor guide to phylogeny and metabolism. Biological studies of environments considered analogous to those of paleobiological interest on the ancient Earth can inform interpretations and suggest new approaches. This paper reviews recent advances in our understanding of the biological diversity of two environments relevant to Archean paleobiology: those of extreme acidity and temperature (the Mt. Hood and White Island volcanoes), and high salinity (living stromatolites in Shark Bay). The combination of traditional microbial isolation with the use of modern molecular techniques has revealed that the microbial communities in these environments are much more diverse than originally thought. Through the extraction of whole microbial community DNA, enzymatic amplification of evolutionarily conserved genes, and cloning and sequencing of these genes, more specific and informed inferences concerning functional complexity in these extreme environments have now been made. Studies of the modern stromatolites have demonstrated that they have a very diverse range of micoorganisms, and contrary to previous interpretations, cyanobacteria are not the most abundant microbes present. In addition, many of the microorganisms are unique with no known close relatives, and these microorganisms may also possess novel physiologies vital to the integrity and persistence of stromatolites through space and time. Microbes in the volcanoes studied are present ubiquitously and include geochemically significant sulfur- and iron-cycling taxa. The findings from the studies reviewed here suggest that the Archean biota may have been functionally diverse and much more complex than has yet been revealed. The importance of studying modern analogues is stressed in that the biogeochemical processes occurring in these communities leave morphological, mineralogical, lipid and isotopic signals that could be sought in the rock record.     

Modeling debris flow initiation and run-out in recently burned areas using data-driven methods

In the framework of the landslide susceptibility assessment, the maps produced should include not only the landslide initiation areas, but also those areas potentially affected by the traveling mobilized material. To achieve this purpose, the susceptibility analysis must be separated in two distinct components: (1) The first one, which is also the most discussed in the literature, deals with the susceptibility to failure, and (2) the second component refers to the run-out modeling using the initiation areas as an input. Therefore, in this research we present a debris flow susceptibility assessment in a recently burned area in a mountain zone in central Portugal. The modeling of debris flow initiation areas is performed using two statistical methods: a bivariate (information value) and a multivariate (logistic regression). The independent validation of the results generated areas under the receiver operating characteristic curves between 0.91 and 0.98. The slope angle, plan curvature, soil thickness and lithology proved to be the most relevant predisposing factors for the debris flow initiation in recently burned areas. The run-out is simulated by applying two different methods: the empirical model Flow Path Assessment of Gravitational Hazards at a Regional Scale (Flow-R) and the hydrological algorithm D-infinity downslope influence (DI). The run-out modeling of the 36 initiation areas included in the debris flow inventory delivered a true positive rate of 83.5% for Flow-R and 80.5% for DI, reflecting a good performance of both models. Finally, the susceptibility map for the entire basin including both the initiation and the run-out areas in a scenario of a recent wildfire was produced by combining the four models mentioned above.     

Slope stability analysis in 3D using numerical limit analysis (NLA) and elasto-plastic analysis (EPA)

The present paper addresses the problem of factor of safety (FS) determination in 3D slope stability analysis. For that purpose, use is made of two numerical methods/techniques in three benchmark problems: numerical limit analysis (NLA) and elasto-plastic analysis (EPA). Finite elements are used in both techniques. The primary objective of the study is, by comparing the two techniques, to establish the feasibility of using NLA in the evaluation of 3D slope stability problems and to establish its practical applicability and competitiveness in relation to EPA. Because of their geometry or their boundary conditions, the problems cannot be analysed as plane strain state problems or using the 2D limit equilibrium technique. In both methods, an FS is determined for the slopes by reducing the strength parameters of the geological materials using a scalar factor, known as the strength reduction factor. From the comparison of the FSs and of the computational efforts required for the two numerical techniques, it was possible to establish NLA’s competiveness and viability for the analysis of real 3D slope stability problems when implemented in an efficient manner.     

Brown algae overproduce cell wall polysaccharides as a protection mechanism against the heavy metal toxicity

Brown algae are often used as heavy metal biomonitors and biosorbents because they can accumulate high concentrations of metals. Cation-exchange performed by cell wall polysaccharides is pointed out as the main chemical mechanism for the metal sequestration. Here, we biochemically investigated if the brown alga Padina gymnospora living in a heavy metal contaminated area would modify their polysaccharidic content. We exposed non-living biomass to Cd and Pb and studied the metals adsorption and localization. We found that raw dried polysaccharides, sulfate groups, uronic acids, fucose, mannose, and galactose were significantly higher in contaminated algae compared with the control ones. Metal concentrations adsorbed by non-living biomass were rising comparatively to the tested concentrations. Electron microscopy showed numerous granules in the cell walls and X-ray microanalysis revealed Cd as the main element. We concluded that P. gymnospora overproduces cell wall polysaccharides when exposed to high metal concentrations as a defense mechanism.     

Tracing the temporal evolution of soil redistribution rates in an agricultural landscape using 239+240Pu and 10Be

Two principal groups of processes shape mass fluxes from and into a soil: vertical profile development and lateral soil redistribution. Periods having predominantly progressive soil forming processes (soil profile development) alternate with periods having predominantly regressive processes (erosion). As a result, short-term soil redistribution – years to decades – can differ substantially from long-term soil redistribution; i.e. centuries to millennia. However, the quantification of these processes is difficult and consequently their rates are poorly understood. To assess the competing roles of erosion and deposition we determined short- and long-term soil redistribution rates in a formerly glaciated area of the Uckermark, northeast Germany. We compared short-term erosion or accumulation rates using plutonium-239 and -240 (^239+240Pu) and long-term rates using both in situ and meteoric cosmogenic beryllium-10 (¹⁰Be). Three characteristic process domains have been analysed in detail: a flat landscape position having no erosion/deposition, an erosion-dominated mid-slope, and a deposition-dominated lower-slope site. We show that the short-term mass erosion and accumulation rates are about one order of magnitude higher than long-term redistribution rates. Both, in situ and meteoric ¹⁰Be provide comparable results. Depth functions, and therefore not only an average value of the topsoil, give the most meaningful rates. The long-term soil redistribution rates were in the range of −2.1 t ha^-1 yr^-1 (erosion) and +0.26 t ha^-1 yr^-1 (accumulation) whereas the short-term erosion rates indicated strong erosion of up to 25 t ha^-1 yr^-1 and accumulation of 7.6 t ha^-1 yr^-1. Our multi-isotope method identifies periods of erosion and deposition, confirming the ‘time-split approach’ of distinct different phases (progressive/regressive) in soil evolution. With such an approach, temporally-changing processes can be disentangled, which allows the identification of both the dimensions of and the increase in soil erosion due to human influence. © 2019 John Wiley & Sons, Ltd.     

Establishing a transboundary network of marine protected areas: Diplomatic and management options for the east African context

International conservation efforts and cooperation are increasingly necessary, particularly at an ecoregion level, for the achievement of international targets for protecting biodiversity and degradation of ecosystems. Whereas more than 11 percent of land is protected, less than 1 percent of marine space is similarly protected. Transboundary networks of marine protected areas and transboundary marine protected areas (TBMPAs) are an essential form of cooperation for meeting these international targets. This paper explores the diplomatic and political options for regional and sub-regional cooperation between Tanzania, Mozambique, and South Africa, for the establishment of transboundary conservation mechanisms in the Eastern African Marine Ecoregion (EAME). Five options for the establishment and management of these mechanisms are presented, together with actions to be taken to facilitate cooperation. The paper deal with a proposed strategy for the implementation of transboundary conservation mechanisms, focusing on TBMPAs, between the three countries at a biogeographical/sub-regional level, supported by lessons learnt in other transboundary marine conservation experiences. The paper concludes that although political will may exist among States sharing borders to establish TBMPAs, the complexity of dealing with sub-regional realities is a difficult obstacle to overcome in a single step. The situation at each border must be taken into account in order that different multi-scale and multivariate solutions, supported by a common baseline will ultimately converge in a common trilateral framework. Finally, a two-step approach seems to be in course with the declaration (October 2009) of a TBMPA linking Ponta do Ouro in Mozambique to iSimangaliso Wetland Park in South Africa, following one of the options formerly presented.