埃及阿赫米姆古墓遗址浅层地球物理勘查

Ground penetrating radar, electromagnetic terrain conductivity, and electric tomography have proven to be effective tools if they are combined together to investigate archeological sites. We have conducted a geophysical survey at the Akhmim archaeological site, the main objective of our survey is to locate additional buried structures for further excavation. Geophysical data were acquired in the area using the GEM-300 multi-frequency terrain conductivity profiler, the SIR 2000 ground penetrating radar, and the Syscal R2 resistivity meter systems. The results of the integrated interpretation show a number of buried features and a strong linear zone about 1 m wide that coincides with the suspected trend of a buried wall. There appears to be two parallel ridges of strong reflections on either side, indicating two parallel walls extended East-West and a room is identified at the bottom left comer of the site. Moreover, the interpretation results of some selected GPR and dipoledipole resistivity profiles adjacent to the open-air museum suggest the existence of a second statue of Ramses Ⅱ to the right of the previously discovered statue which could still be buried in the sand.     

Chemical and isotopic methods for management of artificial recharge in Mazraha Station (Damascus Basin,Syria)

Artificially enhancing recharge rate into groundwater aquifer at specially designed facilities is an attractive option for increasing the storage capacity of potable water in arid and semi‐arid region such as Damascus basin (Syria). Two dug wells (I and II) for water injection and 24 wells for water extraction are available in Mazraha station for artificial recharge experiment. Chemical and stable isotopes (δ²H and δ¹⁸O) were used to evaluate artificial recharge efficiency. 400 to 500*10³ m³ of spring water were injected annually into the ambient shallow groundwater in Mazraha station, which is used later for drinking purpose. Ambient groundwater and injected spring water are calcium bicarbonate type with EC about 880 ± 60 μS/cm and 300 ± 50 μS/cm, respectively. The injected water is under saturated versus calcite and the ambient groundwater is over saturated, while the recovered water is near equilibrium. It was observed that the injection process formed a chemical dilution plume that improves the groundwater quality. Results demonstrate that the hydraulic conductivity of the aquifer is estimated around 6.8*10^?4 m/s. The effective diameter of artificial recharge is limited to about 250 m from the injection wells. Mixing rate of 30% is required in order to reduce nitrate concentration below 50 mg/l which is considered the maximum concentration limit for potable water. Deuterium and oxygen‐18 relationship demonstrates that mixing line between injected water and ambient groundwater has a slope of 6.1. Oxygen‐18 and Cl^? plot indicates that groundwater salinity origin is from mixing process, and no dissolution and evaporation were observed. These results demonstrate the efficiency of the artificial recharge experiments to restore groundwater storage capacity and to improve the water quality. Copyright © 2011 John Wiley & Sons, Ltd.     

Climatic factors controlling chemical and isotopic characteristics of precipitation in Syria

The chemical and isotopic composition of monthly composite rain samples collected at 13 meteoric stations in Syria during two hydrological cycles from 1991 to 1993 have been measured. The chemical analysis of the samples revealed at a number of stations pollution due to industry and sand storms. The temporal and spatial variation of the isotopic composition has been found to be comparable with one of the neighbouring countries such as Jordan and others. The average weighted oxygen‐18 and deuterium values are − 7·5 and − 39·11‰, respectively, and the deuterium excess is 21‰ . The individual isotope values can be divided into two groups. One group is represented by winter precipitation and fits closely the Mediterranean Meteorological Water Line (MMWL). Thus, for winter precipitation, condensation of Mediterranean water vapour appears to be the dominating isotope fractionation process. The other group represents spring precipitation and is spread along an evaporation line below the MMWL, thus indicating the influence of sub‐cloud evaporation. The d‐excess has been found to be lower in the north of Syria (19·9‰ at Tartous, 18·1‰ at Jarablous) than in the south of the country (23·4‰ at Sweida, 24·1‰ at Izra) where Mediterranean air mass dominates. The d‐excess of precipitation in neighbouring countries is also close to the average value of the eastern Mediterranean basin of 22‰ , e.g. for Jordan the value is 23‰ , which signifies that Mediterranean water vapour is, for all these countries, the dominant source of precipitation. The tritium content of precipitation was found to increase with distance from the coast (5·3 TU at coastal station Tartous, 8·8 TU at continental station Palmyra). Low tritium content and high d‐excess at coastal stations clearly indicate a Mediterranean air moisture source. Copyright © 2010 John Wiley & Sons, Ltd.     

Development of a new connection for precast concrete walls subjected to cyclic loading

The Industrialized Building System (IBS) was recently introduced to minimize the time and cost of project construction. Accordingly, ensuring the integration of the connection of precast components in IBS structures is an important factor that ensures stability of buildings subjected to dynamic loads from earthquakes, vehicles, and machineries. However, structural engineers still lack knowledge on the proper connection and detailed joints of IBS structure construction. Therefore, this study proposes a special precast concrete wall-to-wall connection system for dynamic loads that resists multidirectional imposed loads and reduces vibration effects (PI2014701723). This system is designed to connect two adjacent precast wall panels by using two steel U-shaped channels (i.e., male and female joints). During casting, each joint is adapted for incorporation into a respective wall panel after considering the following conditions: one side of the steel channel opens into the thickness face of the panel; a U-shaped rubber is implemented between the two channels to dissipate the vibration effect; and bolts and nuts are used to create an extension between the two U-shaped male and female steel channels. The developed finite element model of the precast wall is subjected to cyclic loads to evaluate the performance of the proposed connection during an imposed dynamic load. Connection performance is then compared with conventional connections based on the energy dissipation, stress, deformation, and concrete damage in the plastic range. The proposed precast connection is capable of exceeding the energy absorption of precast walls subjected to dynamic load, thereby improving its resistance behavior in all principal directions.     

Radio source calibration for the Very Small Array and other cosmic microwave background instruments at around 30 GHz

Accurate calibration of data is essential for the current generation of cosmic microwave background (CMB) experiments. Using data from the Very Small Array (VSA), we describe procedures which will lead to an accuracy of 1 per cent or better for experiments such as the VSA and CBI. Particular attention is paid to the stability of the receiver systems, the quality of the site and frequent observations of reference sources. At 30 GHz the careful correction for atmospheric emission and absorption is shown to be essential for achieving 1 per cent precision.
The sources for which a 1 per cent relative flux density calibration was achieved included Cas A, Cyg A, Tau A and NGC 7027 and the planets Venus, Jupiter and Saturn. A flux density, or brightness temperature in the case of the planets, was derived at 33 GHz relative to Jupiter which was adopted as the fundamental calibrator. A spectral index at ∼30 GHz is given for each.
Cas A, Tau A, NGC 7027 and Venus were examined for variability. Cas A was found to be decreasing at 0.394 ± 0.019 per cent yr⁻¹ over the period 2001 March to 2004 August. In the same period Tau A was decreasing at 0.22 ± 0.07 per cent yr⁻¹. A survey of the published data showed that the planetary nebula NGC 7027 decreased at 0.16 ± 0.04 per cent yr⁻¹ over the period 1967–2003. Venus showed an insignificant (1.5 ± 1.3 per cent) variation with Venusian illumination. The integrated polarization of Tau A at 33 GHz was found to be 7.8 ± 0.6 per cent at position angle =148°± 3°.     

A new approach to interpret self-potential anomaly over a two-dimensional inclined sheet using complex gradient analysis

A new approach is developed to determine the model parameters of a two-dimensional inclined sheet from self-potential anomaly. In this method, the numerical horizontal self-potential gradient obtained from self-potential anomaly is convolved using Hilbert transform to obtain the vertical self-potential gradient. The complex gradient is the sum of horizontal and vertical gradient anomalies. The horizontal and vertical gradients are plotted in one graph to form the complex gradient graph. By defining few characteristic points and distances along the complex gradient profile, procedures are then formulated using the analytical functions of the complex gradients to obtain the model parameters of sheet-like structures. The validity of the new proposed method has been tested on synthetic data with and without random noise. The obtained parameters are in congruence with the model parameters when using noise-free synthetic data. After adding 10% random error in the synthetic data, the maximum error in model parameters is 11.8%. Moreover, the method have been applied to analyze and interpret the self-potential anomaly measured on a graphite ore body at southern Bavarian woods, Germany to prove its efficiency where an acceptable agreement has been noticed between the obtained results and the other published results.     

Some metal concentrations in the edible parts of Tridacna maxima, Red Sea, Egypt

The concentrations of Ca, some essential (Fe, Zn, Mn, and Cu) and non-essential nutritive elements (Cd, Pb, and Ni) were measured in the edible parts (mantle and adductor muscles) of Tridacna maximx collected from south Quseir City (Red Sea). The general trend of metal contents of the different parts follows the order; Ca > Fe > Zn > Pb > Mn > Cu > Cd > Ni. The tissues before cooking recorded the highest average concentrations of Cu, Pb, Fe, Cd, Mn, and Ni (2.658, 5.250, 34.375, 1.464, 3.207, and 0.886 ppm, respectively) relative to tissues after cooking and the water of cooked tissues (WCT). The total cooked tissues recorded higher average contents of Zn and Ca (17.282 and 1,114.679 ppm) than the uncooked tissues. Calcium recorded the highest concentration in the ECT of adductor and mantle muscles (2,081.126 ± 177.39 and 1,893.326 ± 394.28 ppm). Mantle recorded higher concentrations of Pb, Mn, Ni, and Ca (7.489 ± 4.65, 4.241 ± 1.13, 0.980 ± 0.60, and 1,039.362 ± 177.42 ppm, respectively) than adductor muscle before cooking. Ca concentration levels in the WCT increased after cooking tissues especially in adductor muscles. This may attributed to the liberation of larger amount of calcium in ionic form in water. The clams may have intracellular regulatory mechanisms to keep their concentrations in equilibrium, subsequently; the recorded metal concentrations are in the safe limits for human consuming, where these concentrations did not exceed the clam’s capacity of regulation.     

Geophysical and hydrological investigations at the west bank of Nile River (Luxor, Egypt)

Luxor, the modern Egyptian city that occupies the site of ancient Thebes, is famed for its magnificent ancient monuments. Since 1967, the Aswan high dam has prevented the annual flooding of the Nile River, resulting in excessive salt accumulation on the Nile floodplains and on exposed monument surfaces. In addition, the expansion of agricultural land within the Luxor study area has resulted in increased salinity and groundwater level. These conditions accelerate the degradation of buried and exposed monuments that were fairly well preserved in the past. To mitigate this problem, it is necessary to first understand the near-surface setting and the groundwater conditions of the Luxor area. A geophysical investigation was carried out using resistivity and electromagnetic surveys. In addition, a chemical analysis was conducted of some surface water samples collected from canals and the sacred lake of Memnon Temple. Based on the results of the geophysical surveys and the chemical analysis of the water samples, the shallow subsurface was characterized into four geoelecterical units. Groundwater flow directions were determined to be from the central area to the west, causing a rise in the groundwater levels and groundwater salinity in the area of monuments.     

Reliability of Conventional Settlement Evaluation for Circular Foundations on Stone Columns

The unit cell idealization has been long adopted in the settlement prediction of stone column-reinforced soils. This paper tests the accuracy of this modeling concept against trusted settlement values of engineering foundations. It is believed that in order to bestow the outcome of this study adequate generality different soil properties and foundation geometries need to be considered. It was, nevertheless, found impracticable to collect field settlement records for all the analyzed cases. The authors, therefore, appealed to the back analysis concept to construct a reliable mathematical model, calibrated against settlement records of full-scale field load test. This model, which is capable of reproducing the real field settlements, is then employed as a generic tool to obtain trusted settlement values for a variety of cases with essential geometrical similarity. The investigation revealed that the unit cell analysis may, in some cases, lead to erroneous estimation for the settlements of foundations with limited extents. Correction factors, dependent on the treated soil properties as well as the foundation size, are introduced.