Climate Warming and Water Management Adaptation for California

The ability of California's water supply system to adapt to long-term climatic and demographic changes is examined. Two climate warming and a historical climate scenario are examined with population and land use estimates for the year 2100 using a statewide economic-engineering optimization model of water supply management. Methodologically, the results of this analysis indicate that for long-term climate change studies of complex systems, there is considerable value in including other major changes expected during a long-term time-frame (such as population changes), allowing the system to adapt to changes in conditions (a common feature of human societies), and representing the system in sufficient hydrologic and operational detail and breadth to allow significant adaptation. While the policy results of this study are preliminary, they point to a considerable engineering and economic ability of complex, diverse, and inter-tied systems to adapt to significant changes in climate and population. More specifically, California's water supply system appears physically capable of adapting to significant changes in climate and population, albeit at a significant cost. Such adaptation would entail large changes in the operation of California's large groundwater storage capacity, significant transfers of water among water users, and some adoption of new technologies.     

INTEGRATION OF THE MODELS OF ANNAGNPS AND REMM TO ASSESS RIPARIAN BUFFER SYSTEM FOR SEDIMENT REDUCTION

The United States Department of Agriculture (USDA) Annualized Agricultural Non-Point Source Pollution model (AnnAGNPS) is used to help evaluate a watershed response to agricultural management practices to control water quality. However, AnnAGNPS version 3.5 does not contain features to estimate the effect of a riparian buffer (RB) system on water quality. The Riparian Ecosystem Management Model (REMM) is used to simulate the impact of riparian buffer systems on water quality. However, frequently the lack of measured upland loadings that are required by REMM simulation limits the application of REMM. To address this data gap, a study was conducted to integrate AnnAGNPS with REMM for RB system simulation. AnnAGNPS was used to simulate water and sediment loadings from an upland field into a three-zone RB system at the Gibbs Farm located in the Georgia coastal plain. These AnnAGNPS outputs were used as the inputs to REMM. REMM was used to simulate water and sediment movement along the riparian buffers. The AnnAGNPS simulated amount of annual runoff at the edge of the field was close to observed amounts (Nash-Sutcliffe efficiency of 0.92). It is believed that a substantial portion of sand was removed from the runoff one meter into the grass buffer where the samplers were located; therefore, sand was excluded from the AnnAGNPS simulation for comparison with observed sediment. Excluding sand, the AnnAGNPS predicted amount of annual sediment matches the observed amount fairly well (Nash-Sutcliffe efficiency of 0.46). In addition, based on evaluating the percent reduction of sediment at each zonal interface, the AnnAGNPS/REMM model well simulated the function of the RB system to reduce sediment.     

The Alleret maar (Massif Central, France): A new lacustrine sequence of the early Middle Pleistocene in western Europe

The Alleret maar (Massif Central, France) provides a long lacustrine sequence (40.6 m) attributed to the early Middle Pleistocene. Sediment, pollen and diatoms analysis of its upper part (AL2 core, 14.6 m) indicates two temperate phases marked by high lake levels, forest development and vegetation expansion. They are separated by a cold period during which lake level drops, coarse sediment input increases and steppic and xerophilous plants develop. Pollen data suggests that this sequence belongs to the upper part of the Cromerian complex. These results are in agreement with the 557 ± 3 ka (±12 ka, including all errors) ⁴⁰Ar/³⁹Ar age obtained from an interbedded tephra layer emitted by the Mont-Dore/Sancy strato-volcano and establish that this sequence probably covers the MIS 15 substages.     

New Chilean iron meteorites: Medium octahedrites from Northern Chile are unique

Abstract— We report data on three new iron meteorites from Northern Chile and propose names. All are unnamed iron meteorites from the meteorite collection at the Universidad de La Serena. For two, the provenance is unknown; for the third, the presumed discovery site is in the countryside east of Iquique. The three meteorites have been analyzed by instrumental neutron activation analysis (INAA) and their structures examined with a binocular microscope. La Serena is a complete 663 g iron, a new member of group IIICD; it is not paired with any other iron. Elqui has a mass of 260 g; two faces are fractures, possibly produced by human actions, but fusion crust appears to be present on some of the remaining surface. It is a hexahedrite and a member of group IIAB, but its composition differs from that of all other Chilean hexahedrites. The third iron, Pozo Almonte, is a medium octahedrite member of group IIIAB, one of the most common meteorite groups. To find out whether it is paired, we assembled a full set of IIIAB iron meteorites from Northern Chile. Our compositional data show that Pozo Almonte is not paired with any other IIIAB iron, and that there are no pairings within the full set with the possible exception of Joel's Iron and Sierra Sandon, which differ only in their contents of Ir, 0.39 and 0.34 μg/g, respectively. However, Buchwald's (1975) structural observations rule out this possible pairing. We find appreciable differences in Cu, As and Au between the previously paired IIIAB irons Chañaral and Ilimaës and conclude that these should not be paired.     

Dense-media separation as a more efficient pollen extraction method for use with organic sediment/deposit samples: comparison with the conventional method

Dense-media separation, frequently adopted as a standard pollen extraction method for use with minerogenic sediment samples, was adapted for use with organic-rich sediment and peat samples. A total of 15 organic-rich sediment samples, obtained from sites in Corsica and the Southern European Alps, was treated using both dense-media separation and the conventional preparation method in order to compare the relative efficiencies of the two methods. The dense-media separation method consistently achieved a remarkably higher purity of extracted pollen grains. This was especially true for the Corsican peat samples, the dense-media separations being quite pure, whereas the classical method produced samples that were so severely polluted with organic fragments that it was impossible to carry out a satisfactory pollen analysis. The percentage values of each taxon were generally similar using both methods, showing that the two methods are compatible for pollen analytical studies. Total pollen concentrations were generally higher with the dense-media separation method (especially for gyttja samples). In conclusion, dense-media separation is an efficient method for pollen extraction from organic as well as from minerogenic sediments and deposits.     

Magnesium self-diffusion in orthoenstatite

Magnesium self-diffusion coefficients were determined experimentally for diffusion parallel to each of the three crystallographic directions in natural orthoenstatite (En₈₈Fs₁₂). Experiments were conducted at 1 atm in CO-CO₂ gas mixing furnaces, which provided oxygen fugacities equivalent to the iron-wüstite buffer. Diffusion of ²⁵Mg was induced in polished samples of oriented orthoenstatite using a film of isotopically enriched ²⁵MgO as the source material. Very short (<0.15 μm) diffusional penetration profiles were measured by ion microprobe depth profiling. The diffusion coefficients determined for four temperatures (900, 850, 800, 750 °C) provide the activation energies, E _a , and frequency factors, D _o, where D = D _o exp (−E _a /RT) for Mg self-diffusion parallel to each crystallographic direction: a-axis, E _a  = 360 ± 52 kJ/mole and D _o = 1.10 × 10⁻⁴ m²/s; b-axis, E _a  = 339 ± 77 kJ/mole and D _o = 6.93 × 10⁻⁶ m²/s and c-axis, E _a  = 265 ± 66 kJ/mole and D _o = 4.34 × 10⁻⁹ m²/s. In this temperature range, any possible anisotropy of cation diffusion is very small, however the activation energy for diffusion parallel to the c-axis (001) is the lowest and the activation energies for diffusion parallel to the a-axis (100) and b-axis (010) are higher. Application of these diffusion results to the silicate phases of the Lowicz mesosiderite meteorite provides cooling rates for the silicate portion of the meteorite (4–11 °C/100 years) that are similar, although slower, to previous estimates. These silicate cooling rates are still several orders of magnitude faster than the cooling rates (0.1 °C/10⁶ years) for the metal portions. Received: 22 January 1997 / Accepted: 2 October 1997     

Mass Spectrometric Isotope Dilution Determination of Cadmium in Geochemical Reference Samples

Twenty seven geochemical reference samples have been analysed for cadmium using the stable isotope dilution technique. These include four USGS, one NBS, five CRPG, eleven ANRT and six NIMROC samples. Each sample has been analysed at least in duplicate.
The four USGS samples have previously been measured in this laboratory by Rosman and De Laeter, but the present results are believed to be more accurate than the earlier data. Our results for the other twenty three samples are much lower than most of the published data. There is also evidence of cadmium inhomogeneities in some of the samples.     

Oil pollution and penguins—Is cleaning justified?

Oil pollution has been the main mortality factor of adult Jackass Penguins Spheniscus demersus found dead on St Croix Island, South Africa, over a $\text{3}\text{1}\text{2}$ year period. In July 1979, 150 oiled penguins found on the island were sent to the South African Foundation for the Conservation of Coastal Birds (SANCCOB) to assess the effectiveness of cleaning and rehabilitation attempts. Oil was removed with a detergent and in severe cases with liquid paraffin. The mortality rate before and during treatment was 32%. Once waterproof, the penguins were released at sea near Cape Town. By February 1980, 87% of those released had returned to St Croix Island. They appeared healthy, moulted normally, returned to former nests and mates and six had produced clutches. SANCCOB has treated 6551 oiled penguins since 1968, and, based on these release and rehabilitation rates, attempts to clean and rehabilitate oiled penguins are justified.