The mineralogy and petrology of the Pahnavar Fe skarn, In the Eastern Azarbaijan, NW Iran

The Pahnavar calcic Fe-bearing skarn zone is located in the Eastern Azarbaijan (NW Iran). This skarn zone occurs along the contact between Upper Cretaceous impure carbonates and an Oligocene granodioritic batholith. The skarnification process can be categorized into two discrete stages: prograde and retrograde. The prograde stage began immediately after the initial emplacement of the granodioritic magma into the enclosing impure carbonate rocks. The effect of heat flow from the batholith caused the enclosing rocks to become isochemically marmorized in the pure limestone layers and bimetasomatized (skarnoids) in the impure clay-rich carbonates. Segregation and evolution of an aqueous phase from the magma that infiltrated to the marbles and skarnoids through fractures and micro-fractures took place during the emplacement of magma. The influx of Fe, Si and Mg from the granodiorite to the skarnoids and marbles led to the crystallization of anhydrous calc-silicates (garnet and pyroxene). The retrograde stage can be divided, in turn, into two distinct sub-stages. During earliest sub-stage, the previously formed skarn assemblages were affected by intense hydro-fracturing; in addition, Cu, Pb, Zn, along with H₂S and CO₂ were added. Consequently, hydrous calc-silicates (epidote and tremolite-actinolite), sulfides (pyrite, chalcopyrite, galena and sphalerite), oxides (magnetite and hematite) and carbonates (calcite) deposited the anhydrous calc-silicates. The late-retrograde sub-stage was due the incursion of colder oxidizing fluids into the skarn system, causing the alteration of the previously formed calc-silicate assemblages and the development of fine-grained aggregates of chlorite, illite, kaolinite, hematite and calcite. The lack of wollastonite in the mineral assemblage, along with the garnet-clinopyroxene paragenesis, suggests that the prograde stage formed under temperature and fO₂ conditions of 430?C550°C and 10^?26?C10^?23, respectively.     

Computation of the structure of a magnetized strange quark star

We have calculated some properties of spin polarized strange quark matter(SQM) in a strong magnetic field at zero temperature using the MIT bag model.We showed that the equation of state of spin polarized SQM is stiffer than that for unpolarized cases.We have also computed the structural properties of a spin polarized strange quark star(SQS) and found that the presence of a magnetic field leads to a more stable SQS when compared to the structural properties of an unpolarized SQS.     

Nonlinear site response evaluation of earthquakes: A case study from Sirdjan Balvavard Bridge,Kerman province,Iran

The aim of this study is to illustrate the soil conditions encountered at the proposed bridge sites to analyze and evaluate the test conducted, submit recommendations regarding foundation design. At first by field investigation, the required data was collected and after primary processing the acceptable data was selected. For nonlinear analysis of elastic and rigid half space bed rock, standard hyperbolic model was selected and performed, and the results were compared. The study clearly showed that the effect of bed rock on soil behavior during earthquake is one of the main factors controlling prediction of ground response. A critical aspect of this work was to develop and use a computer code “Abbas Converter” developed by the authors that has several advantages, such as quick installation, acting as a connecter function between the used softwares which can generate the input data corresponding to a defined format and finally, the results of this computer code can be easily exported to the other softwares used in this study. Moreover this code can make it easy to solve the problems encountered.     

Carbonate diagenesis of the upper Jurassic successions in the west of Binalud — Eastern Alborz (NE Iran)

The upper Jurassic carbonate settings in Iran are widely exposed in north and northeastern parts. Five stratigraphic columns were selected in the north eastern Iran. Their thickness ranges from 330 to 500 m. The various diagenetic processes identified include, micritization, cementation, compaction (physical and chemical), dissolution, neomorphism, pyritization, hematitization, silicification and dolomitization, which affected these carbonates. Elemental and stable isotopes analysis indicated that these deposits have undergone both meteoric and burial diagenesis in a relatively open system with moderate water-rock interaction. The positive trend between trace elements and oxygen isotope depletion also support these burial conditions. Lighter δ^l8O values of the dolomite samples may be related to an increase in temperature during the burial, which correspond to coarser euhedral crystals. Relatively higher δ¹⁸O values in finer dolomite crystals indicate their formation at lower burial depths relative to coarser crystals. Petrographic evidences such as coarse euhedral crystals with bright and dull zonation prove this interpretation. Chert nodules also have lighter ¹⁸O values relative to carbonate host rock, thus indicating the influence of burial diagenetic processes in their formation. The average environmental palaeotemperature was estimated to be 26°C on the basis of oxygen isotope values of less altered lime-mudstones.     

Geochemical peculiarities of the formation of the Novoshirokinskii gold-polymetallic deposit,Eastern Transbaikalia,Russia

The fluid inclusions in minerals and isotope composition of sulfur in sulfides and carbon and oxygen in carbonates are studied for the Novoshirokinskii gold-polymetallic deposit. The ore-forming fluids are characterized by the following physico-chemical and isotope-geochemical parameters: temperature of 290–100°C, salinity of 13–2.5 wt % NaCl-equiv., δ¹⁸O from +8 to 0‰, δ¹³C of 2.5 ± 0.5‰, and δ³⁴S of 10.5 ± 1.0‰. It is concluded that the Late Proterozoic-Early Cambrian carbonaceous-terrigenous and carbonate rocks were involved in the Late Jurassic ore-magmatic system.     

Analytical solutions for one-dimensional advection–dispersion equation of the pollutant concentration

We present simple analytical solutions for the unsteady advection–dispersion equations describing the pollutant concentration C(x, t) in one dimension. The solutions are obtained by using Laplace transformation technique. In this study we divided the river into two regions x ≤ 0 and x≥0 and the origin at x = 0. The variation of C(x, t) with the time t from t = 0 up to t → ∞ (the steady state case) is taken into account in our study. The special case for which the dispersion coefficient D = 0 is studied in detail. The parameters controlling the pollutant concentration along the river are determined.     

Assessment of climate change impacts on rainfall using large scale climate variables and downscaling models – A case study

Many of the applied techniques in water resources management can be directly or indirectly influenced by hydro-climatology predictions. In recent decades, utilizing the large scale climate variables as predictors of hydrological phenomena and downscaling numerical weather ensemble forecasts has revolutionized the long-lead predictions. In this study, two types of rainfall prediction models are developed to predict the rainfall of the Zayandehrood dam basin located in the central part of Iran. The first seasonal model is based on large scale climate signals data around the world. In order to determine the inputs of the seasonal rainfall prediction model, the correlation coefficient analysis and the new Gamma Test (GT) method are utilized. Comparison of modelling results shows that the Gamma test method improves the Nash–Sutcliffe efficiency coefficient of modelling performance as 8% and 10% for dry and wet seasons, respectively. In this study, Support Vector Machine (SVM) model for predicting rainfall in the region has been used and its results are compared with the benchmark models such as K-nearest neighbours (KNN) and Artificial Neural Network (ANN). The results show better performance of the SVM model at testing stage. In the second model, statistical downscaling model (SDSM) as a popular downscaling tool has been used. In this model, using the outputs from GCM, the rainfall of Zayandehrood dam is projected under two climate change scenarios. Most effective variables have been identified among 26 predictor variables. Comparison of the results of the two models shows that the developed SVM model has lesser errors in monthly rainfall estimation. The results show that the rainfall in the future wet periods are more than historical values and it is lower than historical values in the dry periods. The highest monthly uncertainty of future rainfall occurs in March and the lowest in July.     

Assessments of Strength Anisotropy and Deformation Behavior of Banded Amphibolite Rocks

Assessment of strength anisotropy in transversely isotropic rocks has been one of the most challenging subjects in rock engineering. However, far too little attention has been paid to banded amphibolite rocks. This study aim to evaluate strength and deformation anisotropy behavior of banded amphibolite rocks. The dynamic mechanical tests including ultrasonic pulse test, uniaxial compressive strength, Brazilian test and deformability test were performed on drilled rock samples as a function of foliation plane angle (β = 0°, 30°, 60° and 90°). The results obtained have shown that the dynamic mechanical properties of amphibolite rocks have different values concerning banding plane. Compression and shear waves taken parallel to the foliation plane show highest values than those obtained in the other directions. Under uniaxial test, the banded amphibolite has a U-shaped anisotropy with maximum strength at β = 90° and minimum strength is obtained when β = 30°. Strength anisotropic index ranges between 0.96 and 1.47. It seems that the high range value of anisotropic index is mainly due to slight undulation of foliation planes, that being not perfectly straight. The results of elastic deformation test show that there is no clear dependence on microstructures characteristics of subtype-amphibolite rocks that controlling modulus “shape-anisotropy”. However, in this study, Young modulus values of amphibolite rocks with β follow both types of shape-anisotropy, “U-shape” and “decreased order-shaped”. Thus, this study recommended that further research be undertaken regarding the role of modulus “shape-anisotropy” within the same lithotype.     

Sensitivity Analysis of Selected Input Parameters for an Advanced Constitutive Model

Experimental results and simulated behavior of a medium plasticity clay were compared to investigate the performance of an advanced soil constitutive model. The soil model employed for this study was the 3-SKH model. The performance of this model was compared to the performance of two other critical state models; the Cam Clay (CC) and Modified Cam Clay (MCC) models. In addition, the influences of some of the input parameters on the performance of the 3-SKH model were investigated by performing sensitivity analyses. The comparisons demonstrated that the CC model was able to predict normally consolidated compressive behavior of the remolded medium plasticity clay. The compression behavior of overconsolidated clay was better captured by both the 3-SKH and CC models. For extension behavior of the normally consolidated samples, the MCC model performed better than the CC and 3-SKH models in predicting the stress path. The 3-SKH model was found to be very sensitive to varying the exponent in the hardening function. In particular, a difference between the evaluated values as small as 0.01 had a noticeable effect on the predicted stress–strain values for the overconsolidated compression and extension samples.     

Mixing processes in hydrothermal spring systems and implications for interpreting geochemical data: a case study in the Cappadocia region of Turkey

Mixing is a dominant hydrogeological process in the hydrothermal spring system in the Cappadocia region of Turkey. All springs emerge along faults, which have the potential to transmit waters rapidly from great depths. However, mixing with shallow meteoric waters within the flow system results in uncertainty in the interpretation of geochemical results. The chemical compositions of cold and warm springs and geothermal waters are varied, but overall there is a trend from Ca–HCO₃ dominated to Na–Cl dominated. There is little difference in the seasonal ionic compositions of the hot springs, suggesting the waters are sourced from a well-mixed reservoir. Based on δ¹⁸O and δ²H concentrations, all waters are of meteoric origin with evidence of temperature equilibration with carbonate rocks and evaporation. Seasonal isotopic variability indicates that only a small proportion of late spring and summer precipitation forms recharge and that fresh meteoric waters move rapidly into the flow system and mix with thermal waters at depth. ³H and percent modern carbon (pmC) values reflect progressively longer groundwater pathways from cold to geothermal waters; however, mixing processes and the very high dissolved inorganic carbon (DIC) of the water samples preclude the use of either isotope to gain any insight on actual groundwater ages.