Estimation and validation of atmospheric water vapor content using a MODIS NIR band ratio technique based on AIRS water vapor products

Atmospheric water vapor validation needs simultaneous, well-defined, and independent information which are not easily available causing limitations in the development of remote sensing water vapor retrieval algorithms. This study is concerned with the retrieval of total atmospheric water vapor content and its validation. A band ratio method has been used to estimate the water vapor content based on Moderate Resolution Imaging Spectroradiometer (MODIS) Near InfraRed (NIR) data. The method uses MODIS bands 17, 18, and 19 as NIR bands and band 2 to remove the land cover reflectance. Furthermore, the Atmospheric Infrared Sounder (AIRS) has been used for both algorithm development and analysis of the results. The method has been modified to take into account the dry condition of the central parts of Iran. Using some various datasets, the method is implemented and evaluated quantitatively. The validation of the water vapor estimates has been undertaken by an analysis of AIRS data. The validation results shows error as low as 9 % for the estimated water vapor using the MODIS NIR band ratio method.     

Modelling and predicting the spatial dispersion of skin cancer considering environmental and socio-economic factors using a digital earth approach

ABSTRACT

Almost all causative factors of diseases depend on location. The Digital Earth approach is suitable for studying diseases globally. Geospatial information systems integrated with statistical models can be used to model the relationship between a disease and its causative factors. Through modelling, the most important causative factors can be extracted and the epidemiology of the disease can be observed. In this paper, skin cancer (the most common type of cancer) has been modelled based on its causative factors, including climate factors, people's occupations, nutrition habits, socio-economic factors, and usage of chemical fertiliser. To fit the model, a data framework was first designed, and then data were gathered and processed. Finally, the disease was modelled using Generalised Linear Models (GLM), a statistical model based on the location of the factors. The results of this study identify the most important causative factors together with their relative priority. Furthermore, a model was used to predict the change in skin cancer occurrences caused by a change in one of its causative factors. This work illustrates the ability of the model to predict disease occurrence. Thus, by using this Digital Earth approach, skincancer can be studied in all the key countries around the world.     

Probabilistic rainfall thresholds for flood forecasting: evaluating different methodologies for modelling rainfall spatial correlation (or dependence)

Rainfall threshold (RT) method is one of the evolving flood forecasting approaches. When the cumulative rainfall depth for a given initial soil moisture condition intersects the threshold rainfall curve, the peak discharge is expected to be equal or greater than the threshold discharge for flooding at the target site. Besides the total rainfall depth, spatial and temporal distribution of rainfall impacts the flood peak discharge and the time to peak. To revisit a previous study conducted by the authors, in which spatially independent rainfall pattern was assumed, the spatial distribution of rainfall was simulated following a Monte Carlo approach. The structure of the spatial dependence among sub‐watersheds' rainfalls was taken into account under three different scenarios, namely independent, bivariate copula (2copula) and multivariate Gaussian copula (MGC). For each set of generated random dimensionless rainfalls, the probabilistic RT curves were derived for dry moisture condition. Results were evaluated with both historical and simulated events. For the simulated events, threshold curves were assessed by means of categorical statistics, such as hit rate, false rate and critical success index (CSI). Results revealed that the best performance based on the CSI criterion corresponded to 50% curve in 2copula and MGC scenarios as well as 90% curve in the independent scenario. The recognition of 50% curve in 2copula and MGC scenarios is in agreement with our expectations that the mean probable curve should have the best performance. Moreover, the proposed inclusion of spatially dependent rainfall scenario improved the performance of RT curves by about 25% in comparison with the presumed spatially uniform rainfall scenario. Copyright © 2011 John Wiley & Sons, Ltd.     

Steady critical discharge rates from vertical and horizontal wells in fresh–saline aquifers with sharp interfaces

In this study, the critical (or maximum) discharge rates before saline water enters a well were determined for vertical and horizontal wells in a freshwater aquifer which is separated from a static saline aquifer by a sharp interface. Flow around the well was solved by integration of a point sink solution along the well axis, and both the critical discharge rate and critical interface rise were determined through a comparison of the heads and vertical gradients at the saline–fresh water interface. The rates were determined for vertical and horizontal wells with various lengths and depths for different aquifer salinities. Results were generalized by drawing dimensionless type curves. The results showed that the dimensionless total critical discharge rates are higher for the longer horizontal wells and longer vertical wells with a certain bottom depth, and they almost linearly decrease with well depth at rates of 0.7–0.9. For the dimensionless well length of 0.2, the dimensionless total discharge rate of a horizontal well is about 0.1 more than that of a vertical well with the same length and well-top depth. Also, the critical discharge rates per unit length of well are inversely proportional to well length and remarkably higher for shallower wells. Additionally, the critical pumping rate is proportional to the salinity difference of the aquifers. These results were confirmed by comparison to existing solutions for vertical wells with dimensionless lengths of 0.2, 0.5 and 0.6, and for critical interface rises in the range of 0.75–0.9.     

Missing basics: a study on sanitation and women’s health in urban slums in Lucknow,India

GeoJournal - Sanitation is a multidimensional concept alluding primarily to provision of services for safe disposal of human excreta, provision of clean potable water as well as maintenance of...     

Paleoenvironmental reconstruction using biological markers for the Upper Triassic-Middle Jurassic sedimentary succession in Tabas Basin, central Iran

The Upper Triassic-Middle Jurassic sedimentary succession in the Tabas Basin, with a thickness of about 1600 m, provides a case showing geochemical property changes through the Triassic-Jurassic boundary. The studied section (Kamarmacheh Kuh) is composed of the marine Nayband Formation (Norian-Rhaetian) overlain by siliciclastic sediments of Ab-e-Haji Formation (Lower Jurassic-Aalenian). Detailed geochemical analyses were conducted on selected samples from both formations and the results were used to infer paleo-depositional conditions. Most of the studied samples contain <1 wt% TOC composed mostly of oxidized organic matter with insignificant generative potential. Extract analysis of four representative samples indicate that the rocks also contain minor amounts of preserved algal organic matter along with a secondary contribution of higher plant organic matter from the adjacent watershed. Biomarker analyses show subtle variations in the relative contribution of land plant material that are consistent with the widespread occurrence of coal seams in the upper parts of the Nayband and basal parts of the Ab-e-Haji formations. Although the samples from the Kamarmacheh Kuh Section have low source potential, the extractable hydrocarbons indicate that conditions existed that were conducive to organic matter preservation and that regions of the Tabas Basin with higher primary productivity or lower sedimentation rates may have greater potential.     

Weakly compressible SPH simulation of cnoidal waves with strong plunging breakers

Ocean Dynamics - Hydrodynamics of highly nonlinear cnoidal waves and their subsequent strong plunging breakers are among the least understood and most significant issues in coastal engineering. In...     

The new quasi-geoid model IRQG09 for Iran

Iran is a mountainous country with large lateral density variations of its crust. Constant density value is commonly used to determine the geoid models as well as topographic corrections. The effect of lateral density variation in the geoid can reach up to 14 cm in Iran which is not negligible in a precise geoid modelling. Also, the current height datum of Iran is based on the orthometric system but the effect of gravity variation was not applied in height parameter. Furthermore, the height systems of most neighbouring countries are defined as normal height. Connection of networks can be useful for the unification of height datum, geodynamics researches and optimal adjustment of levelling network. The new quasi-geoid model based on a recent EGM2008 global geo-potential model was created to solve the mentioned problem. The main purpose of the present study is to discuss the results of a research project in which a gravimetric quasi-geoid model for Iran was computed based on the least-squares modification of Stokes' formula. The evaluation is made using 475 GPS/levelling height anomalies covering the major parts of the country except the mountainous areas to the North and West. After a 7-parameter fit, the most promising attempt achieved a RMS value of 19 cm for the residuals based on the GPS/levelling data.     

A practical and efficient numerical scheme for the analysis of steady state unconfined seepage flows

The scaled boundary finite‐element method (SBFEM), a novel semi‐analytical technique, is applied to the analysis of the confined and unconfined seepage flow. This method combines the advantages of the finite‐element method and the boundary element method. In this method, only the boundary of the domain is discretized; no fundamental solution is required, and singularity problems can be modeled rigorously. Anisotropic and nonhomogeneous materials satisfying similarity are modeled without additional efforts. In this paper, SBFE equations and solution procedures for the analysis of seepage flow are outlined. The accuracy of the proposed method in modeling singularity problems is demonstrated by analyzing seepage flow under a concrete dam with a cutoff at heel. As only the boundary is discretized, the variable mesh technique is advisable for modeling unconfined seepage analyses. The accuracy, effectiveness, and efficiency of the method are demonstrated by modeling several unconfined seepage flow problems. Copyright © 2011 John Wiley & Sons, Ltd.