Relation between temperature changes of the mid-upper troposphere over Eurasian mid-high latitudes and solar irradiance in the twentieth century

The δ¹⁸O data obtained from an 18.7 m ice core drilled in Chongce Ice Cap at an elevation of 6,530 m a.s.l. in the West Kunlun Mountains on the northern Tibetan Plateau show a strong correlation with the summer temperature of the middle to upper troposphere over the mid-high latitudes of Eurasia. Based on this, the δ¹⁸O record can be used as a proxy of the June–September mean temperature of the mid-upper troposphere (MUT) from 1903 to 1992. The time span of the ice core record is much longer than the meteorological data available only after 1948. Using the empirical mode decomposition method (EMD), the δ¹⁸O record is decomposed into various frequency components and compared with the solar irradiance variations of the same period. The results show that (1) The June–September mean temperature of the MUT over Eurasian mid-high latitudes is completely decomposed into four IMF (intrinsic mode function) components and an increasing trend. (2) Solar irradiance is decomposed into the Schwabe cycle, the Hale cycle, the Gleissberg cycle, and an increasing trend. (3) The correlation coefficients between the June and September mean temperatures of the MUT over Eurasian mid-high latitudes and solar irradiance on the longer timescales (at least more than 11-year) show the significant correlations; their phase changes are basically identical in general, and (4) the 11-year Schwabe cycle exists in the June–September mean temperature of the MUT over Eurasian mid-high latitudes during most of the time from 1903 to 1992, and only in the two high-temperature phases (1929–1944 and from 1975 to the present) may global warming disturb this relation. A full understanding of this phenomenon would shed insight into the potential consequence of global warming on the MUT.     

Comparison of net primary productivity in karst and non-karst areas: a case study in Guizhou Province,China

Green plants play an important role in energy flows and material cycles. The net primary productivity (NPP) reflects the capability of vegetation to convert solar energy into photosynthate (fixed carbon). Understanding the factors that contribute to variations in NPP is of key importance for improving the rock-desertification environment in karst areas. In this paper, the NPP model (Light Use Efficiency model) is modified on the basis of remote sensing data [moderate resolution imaging spectroradiometer (MODIS)], climate data and observed information. Then the model is employed to estimate the spatial–temporal variations of NPP in the Guizhou Province, China. Finally, the NPP differences between karst area and non-karst area, and the relationships between NPP and climate factors are analyzed. The results show that the NPP estimated using MODIS data are reasonable. The mean NPP of territorial vegetation is 421.46 gC m⁻² year⁻¹; the NPP in the non-karst area is 13.3% higher than that in the karst area; the correlation degree between NPP and precipitation is better in southeastern and western districts.     

Mechanism and geochemical implications of the Late Holocene organic carbon burial event: an example from the southwest coast of India

Carbonaceous clay found in the palaeo-deposits of Meenachil River basin was analysed for the total organic carbon, nitrogen and textural characters. Radiocarbon dating of this clay formation and the embedded carbonized wood fragments was also done. The values obtained for the organic carbon, nitrogen and C/N ratio of the carbonaceous clay exhibited a very remarkable range, suggestive of different environmental conditions of formation. It is evident from the present study that since the lignin and cellulose are the dominant components of terrestrial higher plants, allochthonous and submerged organic matter have high C/N ratio. The radio carbon dating of the sediment and wood samples suggested that the palaeo-deposits of Meenachil River basin were formed as result of many transgrassive–regressive episodes, which had started even before the formation of Vembanad Lake. The formation of carbonaceous clay, as found sandwiched in palaeo-deposits, was due to the global eustatic sea-level fluctuations and tectonism.     

Hydrologic characteristics of floods in Ganges–Brahmaputra–Meghna (GBM) delta

In the middle of 2007, a severe flood affected the People’s Republic of Bangladesh. This is a natural disaster that takes people’s lives, destroys livestock, infrastructures and communication systems and, damages crops and fish ponds. Despite many adverse impacts, the flood situation is an accepted phenomenon to the citizens of Bangladesh, due to the immense increase of soil fertility due to the flood, plus, the recharge of aquifer, ecosystem and fish. The flood of 2007 was the 5th major flood of the last 20 years when more than thirty-five percent of the area of the country was inundated with flood water. As in the past, the flood of 2007 had its own significance. The geography of the country contains a floodplain delta of three major river basins: the Ganges, the Brahmaputra and the Meghna (GBM). The mean monthly rainfall plot from the TRMM satellite data has shown that for both the Meghna and Brahmaputra basins, the rainfall was higher during July 2007 than any other months of the last 2 years. This excess rainfall had accumulated in the Brahmaputra and Meghna rivers and carried downstream to Bangladesh. This was the main cause of the flooding in 2007. The first crossing above the danger level of the river waters was observed at Durgapur station of the Someswari and at Sunamganj station of the Surma on the nineteenth of July, 2007 inside Bangladesh. In terms of magnitude of the peak and duration of the flood, the Brahmaputra was higher in 2007 than during 2004. However, the Ganges river water level never crossed the danger level during flood of 2007. The Meghna was lower during the flood peak for the duration of the flood in 2007. The year–to-year variability in both the magnitude and duration of the flood suggests changes in rainfall and landuse pattern of the catchment.     

Effect of Lime Stabilized Soil Cushion on Strength Behaviour of Expansive Soil

An experimental investigation was undertaken to study the effects of lime-stabilized soil-cushion on the strength behavior of expansive soil. In the present investigation, a series of laboratory tests (Unconfined compression tests and CBR tests) were conducted on both expansive soil alone and expansive soil cushioned with lime-stabilized non-expansive cohesive soil. Lime contents of 2, 4, 6, 8 and 10% by dry weight of cohesive non-swelling soil was used in the stabilized soil cushion. Both expansive soil and lime stabilized soil cushion were compacted to Standard Proctor’s optimum condition with thickness ratio 2:1. Tests on cushioned expansive soils were conducted at different curing and soaking periods i.e., 7, 14, 28 and 56 days. The test results revealed that maximum increase in strength was achieved after 14 days of curing or soaking period with 8% of lime content.     

Intraspecific Variation in Growth of Marsh Macrophytes in Response to Salinity and Soil Type: Implications for Wetland Restoration

Genetic diversity within plant populations can influence plant community structure along environmental gradients. In wetland habitats, salinity and soil type are factors that can vary along gradients and therefore affect plant growth. To test for intraspecific growth variation in response to these factors, a greenhouse study was conducted using common plants that occur in northern Gulf of Mexico brackish and salt marshes. Individual plants of Distichlis spicata, Phragmites australis, Schoenoplectus californicus, and Schoenoplectus robustus were collected from several locations along the coast in Louisiana, USA. Plant identity, based on collection location, was used as a measure of intraspecific variability. Prepared soil mixtures were organic, silt, or clay, and salinity treatments were 0 or 18 psu. Significant intraspecific variation in stem number, total stem height, or biomass was found in all species. Within species, response to soil type varied, but increased salinity significantly decreased growth in all individuals. Findings indicate that inclusion of multiple genets within species is an important consideration for marsh restoration projects that include vegetation plantings. This strategy will facilitate establishment of plant communities that have the flexibility to adapt to changing environmental conditions and, therefore, are capable of persisting over time.     

Geochemistry of core sediments from Mullipallam creek,South East coast of India

The Mullipallam creek in Muthupet mangroves region is the only E-W trending coastal strip in the SE coast of India and is very important, as the mangrove acts as a barrier to natural diasters. Natural, anthropogenic signals and accumulation of elements were made by collecting sediment samples at various depths in a core. All sediments were analyzed for carbonates (CaCO₃), organic carbon (OC), major (Si, Al, Fe, Na, K, Ca, Mg, P), and trace (Mn, Cr, Cu, Ni, Co, Pb, Zn). Normalization with Al values has been done for all the major and trace elements and enrichment factors have been calculated. The calculated enrichment factors and comparison indicate that the trace metals (especially Pb) are enriched mainly due to the external (anthropogenic) activities in the land as well as in the coastal zone (Palk Strait).     

Extended Finite Element Method for the Analysis of Discontinuities in Rock Masses

The strength and deformability of rock mass primarily depend on the condition of joints and their spacing and partially on the engineering properties of rock matrix. Till today, numerical analysis of discontinuities e.g. joint, fault, shear plane and others is conducted placing an interface element in between two adjacent rock matrix elements. However, the applicability of interface elements is limited in rock mechanics problems having multiple discontinuities due to its inherent numerical difficulties often leading to non-convergent solution. Recent developments in extended finite element method (XFEM) having strong discontinuity imbedded within a regular element provide an opportunity to analyze discrete discontinuities in rock masses without any numerical difficulties. This concept is based on partition of unity principle and can be used for cohesive rock joints. This paper summarizes the mathematical frameworks for the implementation of strong discontinuities in 3 and 6 nodded triangular elements and also provides numerical examples of the application of XFEM in one and two dimensional problems with single and multiple discontinuities.     

Eutrophication,health risk assessment and spatial analysis of water quality in Gucheng Lake,China

The water characteristics of the Gucheng Lake, such as eutrophication, health and spatial distribution, were investigated. On the basis of the trophic state index (TSI) and entropy weight, a synthesized trophic state index (STSI) model was established to assess lake eutrophication condition through calculating STSI, choosing TP, TN, COD, BOD and NH₃-N as trophic variables. The STSI ranged from 50.58 to 62.44, which showed that the water has been between eutrophic and supereutrophic. A histogram was applied to health risk assessment which was analyzed from carcinogenic substances (Cr⁺⁶, As and Cd) and non-carcinogenic substances (hydroxybenzene, Pb, Hg, CN⁻ and NH₃), and the results showed that the former was much greater than the latter for effect. The total risk for each resident caused by all pollutants ranged from 5.18E-05 to 8.34E-05, which is far higher than the standard, recommended by Sweden Bureau of Environment Protection and Holland Ministry of Building and Environment Protection (1.0E-05). Cluster analysis was used to detect similarities and dissimilarities among the seven sampling sites and explain the observed clustering in terms of affected conditions. Twenty-one variables were used to divide seven sampling sites into three groups, namely, north lake, south lake and lake center.     

Prosperity and the New Economy in Canada’s major city regions

Canada’s three large city regions—Montréal, Toronto and Vancouver—have been relatively successful in retaining their Manufacturing bases, while at the same time adding substantial numbers of New Economy job opportunities. Deindustrialization appears to have occurred primarily in the Montréal CMA (Census Metropolitan Area) and in some smaller communities where motor vehicle manufacturing was significant. Growth in New Economy jobs has occurred in the larger CMAs; the smaller urban areas have had little success in attracting these jobs. For the most part, these trends appear to be path dependent: prosperous communities with substantial proportions of New Economy jobs are likely to remain prosperous and to attract more such jobs. The lack of significant correlation between Economic Health and the presence of immigrants, same sex couples, performing and visual artists suggests that local economic development strategies based on these factors may have limited success.