Implementation of DSC model and application for analysis of field pile tests under cyclic loading

The disturbed state concept (DSC) model, and a new and simplified procedure for unloading and reloading behavior are implemented in a nonlinear finite element procedure for dynamic analysis for coupled response of saturated porous materials. The DSC model is used to characterize the cyclic behavior of saturated clays and clay–steel interfaces. In the DSC, the relative intact (RI) behavior is characterized by using the hierarchical single surface (HISS) plasticity model; and the fully adjusted (FA) behavior is modeled by using the critical state concept. The DSC model is validated with respect to laboratory triaxial tests for clay and shear tests for clay‐steel interfaces. The computer procedure is used to predict field behavior of an instrumented pile subjected to cyclic loading. The predictions provide very good correlation with the field data. They also yield improved results compared to those from a HISS model with anisotropic hardening, partly because the DSC model allows for degradation or softening and interface response. Copyright © 2000 John Wiley & Sons, Ltd.     

Suggestion for Search of Malononitrile (CH2(CN)2) in a Cosmic Object: Potential Spectral Lines

Astronomy Reports - Though accurate laboratory studies of malononitrile (CH2(CN)2), a dinitrile molecule, have been carried out from time to time, and it has large electric dipole moment $$\mu =...     

Modeling flocculation in a hypertidal estuary

When fine particles are involved, cohesive properties of sediment can result in flocculation and significantly complicate sediment process studies. We combine data from field observations and state-of-the-art modeling to investigate and predict flocculation processes within a hypertidal estuary. The study site is the Welsh Channel located at the entrance of the Dee Estuary in Liverpool Bay. Field data consist of measurements from a fixed site deployment during 12–22 February 2008. Grain size, suspended sediment volume concentration, and current velocity were obtained hourly from moored instruments at 1.5 m above bed. Near-bottom water samples taken every hour from a research vessel are used to convert volume concentrations to mass concentrations for the moored measurements. We use the hydrodynamic model Proudman Oceanographic Laboratory Coastal Ocean Modelling System (POLCOMS) coupled with the turbulence model General Ocean Turbulence Model (GOTM) and a sediment module to obtain three-dimensional distributions of suspended particulate matter (SPM). Flocculation is identified by changes in grain size. Small flocs were found during flood and ebb periods—and correlate with strong currents—due to breakup, while coarse flocs were present during slack waters because of aggregation. A fractal number of 2.4 is found for the study site. Turbulent stresses and particle settling velocities are estimated and are found to be related via an exponential function. The result is a simple semiempirical formulation for the fall velocity of the particles solely depending on turbulent stresses. The formula is implemented in the full three-dimensional model to represent changes in particle size due to flocculation processes. Predictions from the model are in agreement with observations for both settling velocity and SPM. The SPM fortnight variability was reproduced by the model and the concentration peaks are almost in phase with those from field data.     

Performance of buildings with masonry infill walls during the 2011 Lorca earthquake

On Wednesday 11th May 2011 at 6:47 pm (local time) a magnitude 5.1 Mw earthquake occurred 6 km northeast of Lorca with a depth of around 5 km. As a consequence of the shallow depth and the small epicentral distance, important damage was produced in several masonry constructions and even led to the collapse of one of them. Pieces of the facades of several buildings fell down onto the sidewalk, being one of the reasons for the killing of a total of 9 people. The objective of this paper is to describe and analyze the failure patterns observed in reinforced concrete frame buildings with masonry infill walls ranging from 3 to 8 floors in height. Structural as well as non-structural masonry walls suffered important damage that led to redistributions of forces causing in some cases the failure of columns. The importance of the interaction between the structural frames and the infill panels is analyzed by means of non-linear Finite Element Models. The resulting load levels are compared with the member capacities and the changes of the mechanical properties during the seismic event are described and discussed. In the light of the results obtained the observed failure patterns are explained. Some comments are stated concerning the adequacy of the numerical models that are usually used during the design phase for the seismic analysis.     

Tectonic setting of the recent damaging seismic series in the Southeastern Betic Cordillera,Spain

In this work we analyze the tectonic setting of the recent damaging seismic series occurred in the Internal Zones of the eastern Betic Cordillera (SE Spain) and surrounding areas, the tectonic region where took place the 11th May 2011 Mw 5.2 Lorca earthquake. We revisit and make a synthesis of the seven largest and damaging seismic series occurred from 1984 to 2011. We analyze their seismotectonic setting, and their geological sources under the light of recent advances in the knowledge on active faults, neotectonics, seismotectonics and stress regime, with special attention focused on the Lorca Earthquake. These seismic series are characterized by two types of focal mechanisms, produced mainly by two sets of active faults, NNW–SSE to NNE–SSW small (no larger than 20–30 km) extensional faults with some strike slip component, and E–W to NE–SW large strike slip faults (more than 50 km long) with some compressional component (oblique slip faults). The normal fault earthquakes related to the smaller faults are dominant in the interior of large crustal tectonic blocks that are bounded by the large E–W to NE–SW strike-slip faults. The strike slip earthquakes are associated to the reactivation of segments or intersegment regions of the large E–W to NE–SW faults bounding those crustal tectonic blocks. Most of the seismic series studied in this work can be interpreted as part of the background seismicity that occurs within the crustal blocks that are strained under a transpressional regime driven by the major strike slip shear corridors bounding the blocks. The seismotectonic analysis and the phenomenology of the studied series indicate that it is usual the occurrence of damaging compound earthquakes of M  \(\sim \)  5.0 associated with triggering processes driven by coseismic stress transfer. These processes mainly occur in the seismic series generated by NNW–SSE to NNE–SSW faults. These mechanical interaction processes may induce a higher frequency of occurrence of this kind of earthquakes than considered in traditional probabilistic seismic hazard assessments and it should be taken into account in future seismic hazard assessments.     

Denudation History of South China Block and Sediment Supply to Northern Margin of the South China Sea

On the basis of apatite fission track (AFT) analyses,this article aims to provide a quantitative overview of Cenozoic morphotectonic evolution and sediment supply to the northern margin of the South China Sea (SCS).Seventeen granite samples were collected from the coast to the inland of the South China block.Plots of AFT age against sample location with respect to the coastline show a general trend of youngling age away from the coast,which implies more prolonged erosion and sediment contribution at the inland of the South China Sea during post break-up evolution.Two-stage fast erosion process,Early Tertiary and Middle Miocene,is deduced from simulated cooling histories.The first fast cooling and denudation during Early Tertiary are recorded by the samples along the coast (between 70 and 60 Ma) and the inland (between 50 and 30 Mu),respectively.This suggests initial local erosion and deposition in the northern margin of the SCS during Early Tertiary.Fast erosion along the coast ceased since ca.50 Ma,while it had lasted until ca.30 Ma inland,indicating that the erosion was transferred from the local coastal zone initially toward the continental interior with unified subsidence of the northern margin,which resulted in the formation of a south-dipping topography of the continental margin.The thermal stosis in the South China block since ca.30 Mu must det'me the time at which the northern margin became dynamically disconnected from the active rifting and stretching that was taking place to the south.The lower erosion rate is inconsistent with higher sedimentary rate in the Pearl River Mouth basin during Late Oligocene (ca.25 Ma).This indicates that the increased sedimentation in the basin is not due to the erosion of the granite belt of the South China block,but perhaps points to the westward propagation of the paleo-Pearl River drainage related to the uplift of the eastern margin of Tibet plateau and southward jumping of spreading axis of the South China Sea.The socond erosion acceleration rate of the Middle Miocene (ca.14 Ma) cooling could have been linked to the long-distance effect of uplift of the Tibet plateau or due to the enhanced East Asian monsoon.     

Drifting and Meandering of Olive Ridley Sea Turtles in the Bay of Bengal: Role of Oceanic Rossby Waves

Olive Ridley turtles in the Bay of Bengal are previously thought to migrate southward from their nesting ground, along the east coast of India (Orissa coast), towards Sri Lanka. Surprisingly, three of the four Platform Transmitter Terminal (PTT) attached turtles in April-June 2001 meandered off the east coast of India for about two months. It is found that these turtles meandered at the peripherals of cold core cyclonic eddy surrounded by warm core eddies on either side. Concentrations of prey for the turtles in those frontal regions are known to be abundant. Only one of the four PTT attached turtles migrated to the south along the frontal regions in the direction of geostrophic currents. It is found that the locations of these thermal fronts in the Bay of Bengal are primarily determined by the Oceanic Rossby waves and local Ekman pumping.     

Morphotectonic and lithostratigraphic analysis of intermontane Karewa Basin of Kashmir Himalayas, India

Morpho-tectonic study plays an important role in deciphering the effects of tectonic activity in the geomorphic evolution of the drainage basins.Romushi watershed forms one of the major watersheds of the intermontane Karewa Basin of Kashmir Valley.The Karewa sediments are characterized by glacio-fluvio-lacustrine deposits capped by the aeolian loess.The geomorphic,morphometric and lithostratigraphic studies of these cap deposits have been carried out to elucidate the effect of tectonics on the geomorphic evolution of Romushi Watershed.Geomorphic mapping was carried out using GPS measurements,DEM at 30m resolution,Topographic Position Index(TPI) model,topographic maps,LANDSAT TM Imagery and field data.Morphometric and morphotectonic analyses in GIS environment were used to calculate various geomorphic indices(Mountain Front Sinuosity Index,Bifurcation Ratio,Asymmetry Factor,River Profile,etc).These indices reveal that the tectonic uplift observed in the region due to Himalayan orogeny coupled with mass movement and aeolian deposition have dominated the landscape evolution of intermontane Karewa Basin of Kashmir throughout the Late Quaternary Period.Additional data from lithostratigraphic measurements were analyzed to understand the geomorphic evolution of intermontane Karewa Basin.The data revealed that the basin has experienced differential uplift and erosion rates from time to time in the geological past.This was corroborated by the results from the morphometric and morphotectonic analysis.