“Comet‐tail” ejecta streaks: A predicted cratering landform unique to Titan

Abstract— A model for an impact ejecta landform peculiar to Saturn's moon Titan is presented. Expansion of the ejecta plume from moderate‐sized craters is constrained by Titan's thick atmosphere. Much of the plume is collimated along the incoming bolide's trajectory, as was observed for plumes from impacts on Jupiter of P/Shoemaker‐Levy‐9, but is retained as a linear, diagonal ejecta cloud, unlike on Venus where the plume “blows out.” On Titan, the blowout is suppressed because the vertically‐extended atmosphere requires a long wake to reach the vacuum of space, and the modest impact velocities mean plume expansion along the wake is slow enough to allow the wake to close off. Beyond the immediate ejecta blanket around the crater, distal ejecta is released into the atmosphere from an oblique line source: this material is winnowed by the zonal wind field to form streaks, with coarse radar‐bright particles transported less far than fine radar‐dark material. Thus, the ejecta form two distinct streaks faintly reminiscent of dual comet tails, a sharply W‐E radar‐dark one, and a less swept and sometimes comma‐shaped radar‐bright one.     

Radiocarbon on Titan

Abstract— We explore the likely production and fate of ¹⁴C in the thick nitrogen atmosphere of Saturn's moon Titan and investigate the constraints that measurements of ¹⁴C might place on Titan's photochemical, atmospheric transport and surface‐atmosphere interaction processes. Titan's atmosphere is thick enough that cosmic‐ray flux limits the production of ¹⁴C: absence of a strong magnetic field and the increased distance from the Sun suggest production rates of ?9 atom/cm²/s, ?4x higher than Earth. The fate and detectability of ¹⁴C depends on the chemical species into which it is incorporated: as methane it would be hopelessly diluted even in only the atmosphere. However, in the more likely case that the ¹⁴C attaches to the haze that rains out onto the surface (as tholin, HCN or acetylene and their polymers), haze in the atmosphere or recently deposited on the surface would be quite radioactive. Such radioactivity may lead to a significant enhancement in the electrical conductivity of the atmosphere which will be measured by the Huygens probe. Measurements with simple detectors on future missions could place useful constraints on the mass deposition rates of photochemical material on the surface and identify locations where surface deposits of such material are “freshest”.     

Hydrocarbon lakes on Titan

The Huygens Probe detected dendritic drainage-like features, methane clouds and a high surface relative humidity (∼50%) on Titan in the vicinity of its landing site [Tomasko, M.G., and 39 colleagues, 2005. Nature 438, 765-778; Niemann, H.B., and 17 colleagues, 2005. Nature 438, 779-784], suggesting sources of methane that replenish this gas against photo- and charged-particle chemical loss on short (10-100) million year timescales [Atreya, S.K., Adams, E.Y., Niemann, H.B., Demick-Montelara, J.E., Owen, T.C., Fulchignoni, M., Ferri, F., Wilson, E.H., 2006. Planet. Space Sci. In press]. On the other hand, Cassini Orbiter remote sensing shows dry and even desert-like landscapes with dunes [Lorenz, R.D., and 39 colleagues, 2006a. Science 312, 724-727], some areas worked by fluvial erosion, but no large-scale bodies of liquid [Elachi, C., and 34 colleagues, 2005. Science 308, 970-974]. Either the atmospheric methane relative humidity is declining in a steady fashion over time, or the sources that maintain the relative humidity are geographically restricted, small, or hidden within the crust itself. In this paper we explore the hypothesis that the present-day methane relative humidity is maintained entirely by lakes that cover a small part of the surface area of Titan. We calculate the required minimum surface area coverage of such lakes, assess the stabilizing influence of ethane, and the implications for moist convection in the atmosphere. We show that, under Titan's surface conditions, methane evaporates rapidly enough that shorelines of any existing lakes could potentially migrate by several hundred m to tens of km per year, rates that could be detected by the Cassini orbiter. We furthermore show that the high relative humidity of methane in Titan's lower atmosphere could be maintained by evaporation from lakes covering only 0.002-0.02 of the whole surface.     

The dayside magnetospheric boundary layer at Mercury

Magnetic field and plasma data from the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft on the outbound portions of the first (M1) and second (M2) flybys of Mercury reveal a region of depressed magnetic field magnitude and enhanced proton fluxes adjacent to but within the magnetopause, which we denote as a dayside boundary layer. The layer was present during both encounters despite the contrasting dayside magnetic reconnection, which was minimal during M1 and strong during M2. The overall width of the layer is estimated to be between 1000 and 1400 km, spanning most of the distance from the dayside planetary surface to the magnetopause in the mid-morning. During both flybys the magnetic pressure decrease was ∼1.6 nPa, and the width of the inner edge was comparable to proton gyro-kinetic scales. The maximum variance in the magnetic field across the inner edge was aligned with the magnetic field vector, and the magnetic field direction did not change markedly, indicating that the change in field intensity was consistent with an outward plasma-pressure gradient perpendicular to the magnetic field. Proton pressures in the layer inferred from reduced distribution observations were 0.4 nPa during M1 and 1.0 nPa during M2, indicating either that the proton pressure estimates are low or that heavy ions contribute substantially to the boundary-layer plasma pressure. If the layer is formed by protons drifting westward from the cusp, there should be a strong morning–afternoon asymmetry that is independent of the interplanetary magnetic field (IMF) direction. Conversely, if heavy ions play a major role, the layer should be strong in the morning (afternoon) for northward (southward) IMF. Future MESSENGER observations from orbit about Mercury should distinguish between these two possibilities.     

Relative and absolute ages of individual craters and the rate of infalls on the moon in the post-imbrium period

This paper contains a reasonably successful attempt to determine relative ages and then absolute ages of individual craters younger than Imbrium, and the rate of infalls onto the Moon as a function of time. After the tail of the massive premare bombardment became depleted before 3 aeons (1 aeon = 10⁹ years) ago, there was a period of minimal numbers of infalls. The rate of infalls increased rather steadily from this minimum to the present. The rate in the geologically recent past (0.3 aeon) was about two times that found for the period immediately after the last of the major lave outpourings (3.2 aeons). Absolute ages were determined for large craters (?8 km) from crater counts on the surfaces within and on the rims of the large craters. Key dates were 0 and 0.3 aeon for terrestrial meteoritic craters, 3.2, 3.5, 3.8, and 3.82 aeons for the various mare surfaces according to the determinations of D.E. Wilhelms (1980, Geologic history of the Moon, U.S. Geol. Surv. Prof. Pap.) and 3.85 aeons from the formation of Imbrium.     

An aircraft study of turbulence dissipation rate and temperature structure function in the unstable marine atmospheric boundary layer

The dissipation rate of turbulent kinetic energy, , and the temperature structure function parameter, C _T ², have been measured over water from the near surface (Z = 3 m) to the top of the boundary layer. The near surface values of and C _T ² were used to calculate the velocity and temperature Monin-Obukhov scaling parameters u _* and T _*. The data collected during unstable lapse rates were used to evaluate the feasibility of extrapolating the values of and C _T ² as a function of height with empirical scaling formulae. The dissipation rate scaling formula of Wyngaard et al. (l971 a) gave a good fit to an average of the data for Z < 0.8 Z _i. In the surface layer the scaling formula of Wyngaard et al. (1971b) disagreed with the C _T ² values by as much as 50%. This disagreement is due to an unexpected reduction in the measured values of C _T ² forZ < 30 m. At this point it is not clear if the discrepancy is a unique property of the marine boundary layer or if it is simply some unknown instrumental or analytical problem. The mixed layer scaling results were similar to the overland results of Kaimal et al. (1976).     

Improved magnetic anomalies of the Antarctic lithosphere from satellite and near-surface data

The Antarctic magnetic anomaly map compiled marine and airborne surveys collected south of 60°S through 1999 and used Magsat data to help fill in the regional gaps between the surveys. Ørsted and CHAMP satellite magnetic observations with greatly improved measurement accuracies and temporal and spatial coverage of the Antarctic, have now supplanted the Magsat data. We combined the new satellite observations with the near-surface survey data for an improved magnetic anomaly map of the Antarctic lithosphere. Specifically, we separated the crustal from the core and external field components in the satellite data using crustal thickness variations estimated from the terrain and the satellite-derived free-air gravity observations. Regional gaps in the near-surface surveys were then filled with predictions from crustal magnetization models that jointly satisfied the near-surface and satellite crustal anomalies. Comparisons in some of the regional gaps that also considered newly acquired aeromagnetic data demonstrated the enhanced anomaly estimation capabilities of the predictions over those from conventional minimum curvature and spherical harmonic geomagnetic field models. We also noted that the growing number of regional and world magnetic survey compilations involve coverage gaps where these procedures can contribute effective near-surface crustal anomaly estimates.     

Modelling of the vertical fluxes of nitric acid,ammonia, and ammonium nitrate

Results from numerical investigations regarding the exchange of HNO₃, NH₃, and NH₄NO₃ between the atmosphere and the biosphere are presented. The investigations were performed with a modified inferential method which is based on the generally accepted micrometeorological ideas of the transfer of momentum, sensible heat and matter near the Earth's surface and the chemical reactions among these nitrogen compounds. This modified inferential method calculates the micrometeorological quantities (such as the friction velocity and the fluxes of sensible and latent heat), the height-invariant fluxes of the composed chemically conservative trace species with group concentrationsc ₁=[HNO₃]+[NH₄NO₃] (total nitrate),c ₂=[NH₃]+[NH₄NO₃] (total ammonia), andc ₃=[HNO₃]-[NH₃] as well as the fluxes of the individual nitrogen compounds. The parameterization of the fluxes is based on the flux-gradient relationships in the turbulent region of the atmospheric surface layer. The modified inferential method requires only the data of wind velocity, temperature, humidity and concentrations (HNO₃, NH₃, and NH₄NO₃) measured at a reference height by stations of a monitoring network.     

Southern Ocean warming and increased ice shelf basal melting in the twenty-first and twenty-second centuries based on coupled ice-ocean finite-element modelling

We utilise a global finite-element sea ice–ocean model (FESOM), focused on the Antarctic marginal seas, to analyse projections of ice shelf basal melting in a warmer climate. Ice shelf–ocean interaction is described using a three-equation system with a diagnostic computation of temperature and salinity at the ice–ocean interface. A tetrahedral mesh with a minimumhorizontal resolution of 4 km and hybrid vertical coordinates is used. Ice shelf draft, cavity geometry, and global ocean bathymetry have been derived from the RTopo-1 data set. The model is forced with the atmospheric output from two climate models: (1) the Hadley Centre Climate Model (HadCM3) and (2) Max Planck Institute’s ECHAM5/MPI-OM coupled climate model. Results from experiments forced with their twentieth century output are used to evaluate the modelled present-day ocean state. Sea ice coverage is largely realistic in both simulations; modelled ice shelf basal melt rates compare well with observations in both cases, but are consistently smaller for ECHAM5/MPI-OM. Projections for future ice shelf basal melting are computed using atmospheric output for the Intergovernmental Panel on Climate Change (IPCC) scenarios E1 and A1B. In simulations forced with ECHAM5 data, trends in ice shelf basal melting are small. In contrast, decreasing convection along the Antarctic coast in HadCM3 scenarios leads to a decreasing salinity on the continental shelf and to intrusions of warm deep water of open ocean origin. In the case of the Filchner–Ronne Ice Shelf (FRIS), this water reaches deep into the cavity, so that basal melting increases by a factor of 4 to 6 compared to the present value of about 90 Gt/year. By the middle of the twenty-second century, FRIS becomes the dominant contributor to total ice shelf basal mass loss in these simulations. Our results indicate that the surface freshwater fluxes on the continental shelves may be crucial for the future of especially the large cold water ice shelves in the Southern Ocean.