Waveform Shaping of Sonar Transducers for Improving the Vertical Resolution in Sub-bottom Sediments Profiling

Vertical resolution is of fundamental importance in sonar exploration and is directly related to the duration of the acoustic pulse generated by the transducer. The shorter the radiated pulse, the higher the vertical resolution. Many sub-bottom profiling sonar systems use piezoelectric transducers because they are reversible and well understood. Piezoelectric projectors are normally resonant transducers, which are intrinsically narrowband. A piezoelectric transducer is usually driven by a tone-burst. However, it is possible to use Fourier techniques to find a pre-compensated electrical driving function so that the transducer radiates a prescribed wider band acoustic waveform. This technique can be applied to synthesize zero-phase cosine-magnitude, Gaussian, and bionic pulses, with a conventional sandwich transducer. Zero-phase cosine-magnitude waveforms provide minimum length pulses (and therefore maximum resolution) within a prescribed frequency band.The aim of this paper is to illustrate the synthesis of wideband acoustic pulses using an underwater piezoelectric projector. The conventional acoustic waveform radiated when a Tonpiltz transducer is transiently excited using a “click” and allows its frequency response function to be measured. This function is used to design the electrical signal which then drives the transducer so that it radiates the shortest pulse compatible with its mechanical response. The significant resolution enhancement of the waveform shaping process is illustrated by its application to a sediment wedge model.     

Tephrostratigraphy and paleo-environmental implications of Late Quaternary sediments and interstitial water in the western Ulleung Basin, East/Japan Sea

Two piston cores, collected from the western Ulleung Basin of the East/Japan Sea, were used to investigate the Late Quaternary tephrostratigraphy, lithology, and mineralogy of the sediments, as well as the elemental composition of both sediments and interstitial water, and their paleo-environmental implications. The cores show two lapilli tephra layers and one rhyolitic ash layer at the boundaries between sedimentary lithofacies units I, II, and III. These layers can be correlated with the well-known Ulleung-Oki (ca. 9.3 ka; boundary of units I/II), Ulleung-Yamato (ca. 25–33 ka), and Aira-Tanzawa (ca. 25.1 ka; boundary of units II/III) layers, respectively. These data suggest that the cores cover the period from the middle stage of marine isotope stage (MIS) 3 to the Holocene. In each core, a so-called dark laminated mud (DLM) layer in unit II commonly has high contents of Si and Al, suggesting that the DLM layer generally contains significant amounts of fine-grained silicates and/or aluminosilicates. In addition, these DLM layers are enriched in Fe relative to Mn, iron being predominantly bound in framboidal pyrite. The size distribution of pyrite in the DLM layers suggests that these have formed under anoxic (euxinic) conditions at times of reduced water circulation in the basin during sea-level lowstand (euxinic environment). The C/N ratios [5–12] suggest that sedimentary organic matter in the cores is predominantly of marine origin. Total organic carbon (TOC) contents increased shortly before Termination I. This could have been caused by an increased flux of marine organic matter in association with sea-level rise. The C and S values of units II and III (Late Pleistocene sediments; C: <2.0%; S: 0.5–2.1%) suggest a more euxinic environment than that of unit I (Holocene sediments; C: 1.0–3.5%; S: <1.0%). Concentrations of SO₄^2– in the interstitial water decrease with increasing burial depth, whereas CH₄ concentrations show the reverse trend. Therefore, it seems that sulfate reduction, probably related to microbial activity, predominates in the upper core sections (<5 m), shifting to methanogenesis in the lower core sections.     

Numerical and experimental study on hydrodynamic interaction of side-by-side moored multiple vessels

This paper aims to investigate the basic interaction characteristics of side-by-side moored vessels both numerically and experimentally. A higher-order boundary element method (HOBEM) combined with generalized mode approach is applied to analysis of motion and drift force of side-by-side moored multiple vessels (LNG FPSO, LNGC and shuttle tankers). Model tests were carried out for the same floating bodies investigated in the numerical study in regular and irregular waves. Global and local motion responses and drift forces of three vessels are compared with those of calculations. Discussions is highlighted on applicability of numerical method to prediction of sophisticated multi-body interaction problem of which motion behavior is very important to analysis of mooring dynamics of deep sea floating bodies.     

Trends in the solubility of iron,aluminium, manganese and phosphorus in aerosol collected over the Atlantic Ocean

The solubility of iron, aluminium, manganese and phosphorus has been determined in aerosol samples collected between 49°N and 52°S during three cruises conducted in the Atlantic Ocean as part of the European Union funded IRONAGES programme. Solubilities (defined at pH 4.7) determined for Fe and Al in samples of Saharan dust were significantly lower (medians 1.7% and 3.0%, respectively) than the solubilities of these metals in aerosols from other source regions (whole dataset medians 5.2% and 9.0%, respectively). Mn solubility also varied with aerosol source, but the median solubility of Mn in Saharan dust was very similar to the median for the dataset as a whole (55% and 56%, respectively). The observed solubility of aerosol P was ∼ 32%, with P solubility in Saharan aerosol perhaps as low as 10%. Laboratory studies have indicated that aerosol Fe solubility is enhanced by acid processing. No relationship could be found between Fe solubility and the concentrations of acid species (non-seasalt SO₄²⁻, NO₃⁻) nor the net acidity of the aerosol, so we are unable to confirm that this process is significant in the atmosphere. In terms of the supply of soluble Fe to oceanic ecosystems on a global scale, the observed higher solubility for Fe in non-Saharan aerosols is probably not significant because the Sahara is easily the dominant source of Fe to the Atlantic. On a smaller scale however, higher solubility for aerosol Fe may alter our understanding of Fe cycling in regions such as the remote Southern Ocean.     

Dissociation constants of protonated cysteine species in seawater media

The dissociation constants (pK₁, pK₂ and pK₃) for cysteine have been measured in seawater as a function of temperature (5 to 45 °C) and salinity (S = 5 to 35). The seawater values were lower than the values in NaCl at the same ionic strength. In an attempt to understand these differences, we have made measurements of the constants in Na–Mg–Cl solutions at 25 °C. The measured values have been compared to those calculated from the Pitzer ionic interaction model. The lower values of pK₃ in the Na–Mg–Cl solutions have been attributed to the formation of Mg²⁺ complexes with Cys²⁻ anions

Mg²⁺ + Cys²⁻ = MgCys

The stability constants have been fitted to

after corrections are made for the interaction of Mg²⁺ with H⁺.The pK₁ seawater measurements indicate that H₃Cys⁺ interacts with SO₄²⁻. The Pitzer parameters β⁰(H₃CysSO₄), β¹(H₃CysSO₄) and C(H₃CysSO₄) have been determined for this interaction. The formation of CaCys as well as MgCys are needed to account for the values of pK₂ and pK₃ in seawater.The consideration of the formation of MgCys and CaCys in seawater yields model calculated values of pK₁, pK₂ and pK₃ that agree with the measured values to within the experimental error of the measurements. This study shows that it is important to consider all of the ionic interactions in natural waters when examining the dissociation of organic acids.     

Australian biodiversity and marine protected areas

Australian flora and fauna are both highly endemic and species-rich, yet they have been under enormous human pressure as ecosystems have been simplified and fragmented. In order to promote biodiversity Australia has ratified the Convention on Biological Diversity (CBD) and has released a Draft National Strategy for the Conservation of Australia's Biological Diversity. The purpose of this article is to explore how Australian biological diversity will be supported in a national system of marine protected areas. Attention is given firstly to the international and Australian responses to biological diversity, particularly with respect to the use of in situ conservation. This is followed by an overview of the Australian marine protected area system. An assessment is made on how marine protected areas can further conserve and enhance the unique biodiversity of Australia.     

Back to the future: reflections and directions of South African marine bioinvasion research

Biological invasions continue to increase around the world, with impacts on many coastal marine systems. Here we review the South African marine invasion literature which, despite the field being relatively new, has grown to have significant presence in both the local and international arenas. Of the 79 papers reviewed, 70% focused on the establishment and spread of alien species, with modes of transport and introduction largely overlooked. An emphasis was also apparent towards field studies, in particular survey work, with few experimental studies. The overwhelming majority of papers focused on a single species, the Mediterranean mussel Mytilus galloprovincialis, reflecting the scale of this invasion and the tractable nature of rocky shores as study systems. With the exception of this one species, the impacts of marine alien species have rarely been quantified. We suggest that future research extends the taxonomic coverage of present work and develops a better understanding of the mechanisms of introduction, establishment and spread of marine alien species. Through an experimental approach, the drivers of altered ecological patterns and processes resulting from invasions should be addressed, providing insight into associated impacts. This approach will maintain the local applicability and international relevance of South African marine invasion research.