Modeling of groundwater draft based on satellite-derived crop acreage estimation over an arid region of northwest India

Over-exploitation of groundwater for agricultural crops puts stress on the sustainability of natural resources in the arid region of Rajasthan state, India. Hydrogeological study of groundwater levels of the study area during the pre-monsoon (May to June), post-monsoon (October to November) and post-irrigation (February to March) seasons of 2004–2005 to 2011–2012 shows a steady decline of groundwater levels at the rate of 1.28–1.68 m/year, mainly due to excessive groundwater draft for irrigation. Due to the low density of the groundwater observation-well network in the study area, assessment of groundwater draft, and thus groundwater resource management, becomes a difficult task. To overcome the situation, a linear groundwater draft model (LGDM) has been developed based on the empirical relationship between satellite-derived crop acreage and the observed groundwater draft for the year 2003–2004. The model has been validated for a decade, during three year-long intervals (2005–2006, 2008–2009 and 2011–2012) using groundwater draft, estimated through a discharge factor method. Further, the estimated draft was validated through observed pumping data from random sampled villages (2011–2012). The results suggest that the developed LGDM model provides a good alternative to the estimation of groundwater draft based on satellite-based crop area in the absence of groundwater observation wells in arid regions of northwest India.     

Petrographic characteristics and depositional conditions of Permian coals of Pench, Kanhan, and Tawa Valley Coalfields of Satpura Basin, Madhya Pradesh, India

This paper attempts to characterize the coals of Satpura Gondwana basin using a large number of pillar coal samples drawn from the working coal mines of Pench, Kanhan, and Tawa (Pathakhera) Valley Coalfields of this basin. This westernmost Gondwana basin of Peninsular India is graben/half-graben type and occupies an area of 12 000 km² with sedimentary fills (>5000 m) ranging in age from Permian to Cretaceous. The Barakar Formation (Permian) is exclusively coal-bearing with a total coal reserve of nearly 2000 Mt. The results show that the coals of this basin are equally rich in inertinite (22.8–58.7%, 24.5–62.0% mmf basis) and vitrinite (24.4–52.4%, 24.4–56.0% mmf basis). The concentration of liptinite ranges from 8.8% to 23.2% (9.0–26.0% mmf basis). The dominant microlithotypes of these coals are inertite and vitrite with comparatively low concentrations of vitrinertite and clarite. The vitrinite reflectance (Rom% values) suggests that the Pench Valley (0.30–0.58%) coals are subbituminous C to high volatile C bituminous in rank, while the Kanhan and Tawa Valley coals (0.52–0.92%) are subbituminous A to high volatile A bituminous in rank. The localized enhancement of rank in the latter two basins has been attributed to the extraneous heat flow from deep-seated igneous intrusions in the basin. The microlithotype composition of these coals is suggestive of their evolution in limno-telmatic zones, under fluvio-lacustrine control with the development of upper deltaic and lower deltaic conditions near the fresh water lacustrines. The floral input is characteristic of forest swamps with intermittent floods, leading to the development of reed moor and open moor facies, particularly in the Pench Valley basin. The Gelification Index (GI) and Tissue Preservation Index (TPI) are suggestive of terrestrial origin with high tree density. Further, moderately high GI and exceedingly high telovitrinite based TPI along with high ash content, particularly for the coals of Kanhan and Tawa Valley Coalfields, are indicative of the recurrence of drier conditions in the forested swamps. Furthermore, lateral variation in TPI values is indicative of increase in the rate of subsidence vis-à-vis depth of the basin from east to west (Pench to Tawa Valley Coalfield). The Ground Water Index (GWI) suggests that these coals have evolved in mires under ombotrophic to mesotrophic hydrological conditions. The Vegetation Index (VI) values are indicative of the dominance of herbaceous plants in the formation of Pench Valley coals and comparatively better forest input in the formation of Kanhan and Tawa Valley coals.     

Assessment of groundwater quality index for drinking purpose in the Durg district,Chhattisgarh using Geographical Information System (GIS) and Multi-Criteria Decision Analysis (MCDA) techniques

Present study is carried out to evaluate and characterize groundwater quality using Geographical Information System (GIS) and Multi-Criteria Decision Analysis (MCDA) Techniques. In order to ascertain the groundwater quality a detailed survey was carried-out and a total 88 numbers of groundwater samples were collected from different locations of the Durg district. Various physicochemical parameters of collected groundwater samples were analyzed for the periods of 5-years from 2007 to 2011 during premonsoon period. Six criteria viz. pH, calcium (Ca⁺⁺), magnesium (Mg⁺⁺), chloride (Cl^–), nitrate (NO^– ₃) and fluoride (F^–) were used for the determination of groundwater quality index. The analytical hierarchical process (AHP) used to determine the weight of various parameters and their classes for identifying the groundwater quality index. Present study is helpful for long-term planning and management of groundwater resources of the study area.     

Alongshore Sediment Transport Near Tidal Inlets of Chilika Lagoon; East Coast of India

ABSTRACT

Chilika, a lagoon along the east coast of India, is undergoing transformation due to frequent shoreline change near inlet(s). Shoreline change near inlet includes change in position and shape of inlet, inlet channel length, and spit growth/erosion. These variable features of lagoon inlet(s) critically depend on alongshore sediment transport (LST) and discharge (water and sediment) from the lagoon to the sea. The LST and the processes responsible for sand spit growth/erosion, considered as important attributes of inlet stability, are the subject matter of the present investigation and hence the study assumes importance. The study includes integration of observational and modeling framework. Observations include nearshore wave, bathymetry, beach profile, shoreline and sediment grain size of spits while numerical modeling includes simulation of the wave using MIKE 21 Spectral Wave model and LST simulation using LITtoral DRIFT. The results indicate that the predominant wave directions as S and SSE, which induces round the year south to north alongshore transport with significant seasonal variation in magnitude. The estimated LST closely matches with previous studies near Chilika inlet and for other locations along the Odisha coast. Besides temporal variability, the study reveals spatial variability in alongshore transport near Chilika inlet and considers it as one of the important attributes along with northward spit growth for inlet migration/closure/opening.     

Evaluation of environmental status and geochemical assessment of sediments,Manasbal Lake,Kashmir, India

The present study was conducted on the Manasbal Lake (34°14′N: 74°40′E) to assess the geochemical characteristics of the lake bottom sediments, its environmental implications and its response in the local catchment area. This study tracks the spatial distribution of grain size, geochemical analysis, C/N ratio, calcium carbonate (CaCO₃) and organic matter (OM) of the lake bottom sediments. It is observed that the clay fraction (49.79%) is predominant in the lake bottom sediments, followed by silt (35.88%) and sand (14.33%) and its spatial distribution is controlled by water depth. Geochemistry and normalized diagrams for the major oxides and trace elements reveal enrichment of CaO, K₂O, P₂O₅, S, Cl, Ni, Zn and Sr. Chemical index of alteration (CIA) reflects low to moderate weathering intensity and near compositional similarity with the bedrock exposed in the catchment area around the lake. Environmental indices (EF, Igeo) suggest that the sediments are enriched in Cu, Ni, Zn, Cr, Co, Pb followed by Mn content. Pollution load index (PLI) reveal that all the sampling sites reflect low to moderately polluted category except for few stations that are towards the southern and southeastern side of the lake. OM (16.85%), CaCO₃ (14.04%) and C/N ratio (15.5) of the lake bottom sediments is attributed to high organic activity within the lake, shell fragments, contributions from the lake flora and fauna adhering to the clayey silty sediments. The C/N ratio of 15.5 suggests a mixed source of organic matter both terrestrially and in situ formation within the lake. Sulphur and chlorine are high amongst the trace elements suggesting anthropogenic detritus input into the lake and this is due to the chemical fertilizers from the agricultural runoff and organic load into the lake. Thus, the present study suggests that in order to preserve the pristine lake ecology and the environment; continued monitoring and restoration efforts need to be undertaken.     

Charged Particle Monitor on the Astrosat Mission

Charged Particle Monitor (CPM) on-board the Astrosat satellite is an instrument designed to detect the flux of charged particles at the satellite location. A Cesium Iodide Thallium (CsI(Tl)) crystal is used with a Kapton window to detect protons with energies greater than 1 MeV. The ground calibration of CPM was done using gamma-rays from radioactive sources and protons from particle accelerators. Based on the ground calibration results, energy deposition above 1 MeV are accepted and particle counts are recorded. It is found that CPM counts are steady and the signal for the onset and exit of South Atlantic Anomaly (SAA) region are generated in a very reliable and stable manner.     

Relation between spring water radon anomalies and seismic activity in Garhwal Himalaya

The variations of spring water radon concentration and meteorological parameters were analysed in relation to the seismic activities in Garhwal Himalaya, India. The radon anomalies were classified on the basis of statistical treatment of the daily observations. The precise measurements of water discharge rate from the spring have been made along with radon measurements for earthquake precursory study. The earthquakes with epicentral distances less than 150 km were considered by an empirical relationship. Pre-, co-, and post-seismic changes in the radon concentration were taken carefully into account in the empirical relationship to establish this behaviour as a potential earthquake precursor. The empirical relationship has been validated by the radon data recorded from the spring waters. The magnitudes of the earthquakes were estimated by using the empirical relationship by introducing computed correlation coefficient of radon and meteorological parameters. The calculated magnitude of some local earthquakes matches exactly with the magnitude recorded by the laboratory seismograph. The possible mechanisms that may cause a radon anomaly are also discussed.     

Studies on Adsorptive Desulfurization by Activated Carbon

Sulfur removal using adsorption requires a proper process parametric study to determine its optimal performance characteristics. In this study, response surface methodology was employed for sulfur removal from model oil (dibenzothiophene; DBT dissolved in iso‐octane) using commercial activated carbon (CAC) as an adsorbent. Experiments were carried out as per central composite design with four input parameters such as initial concentration (C₀: 100–900 mg/L), adsorbent dosage (m: 2–22 g/L), time of adsorption (t: 15–735 min), and temperature (T: 10–50°C). Regression analysis showed good fit of the experimental data to the second‐order polynomial model with coefficient of determination R²‐value of 0.9390 and Fisher F‐value of 16.5. The highest removal of sulfur by CAC was obtained with m = 20 g/L, t = 6 h, and T = 30°C.     

3D building model-assisted snapshot positioning algorithm

GPS Solutions - A method for constructively using non-line-of-sight GNSS signals from a snapshot of signal samples for positioning of users in urban areas is presented here. Using a 3D building...