Über Sedimentbildung am Meeresboden

Ohne Zusammenfassung     

Eine statistische Theorie der Böigkeit des Windes

Zusammenfassung Es werden Gleichungen abgeleitet, mittels derer man aus dem Energiespektrum des Windes die Häufigkeit von Böen bestimmter Größe und bestimmter Mindestgröße, die Größe der häufigsten Böenspitze und einen mittleren Abstand zwischen zwei Böenstößen berechnen kann. Die Theorie wird an einem Beispiel erläutert.

---

Summary Equations are derived which allow the calculation of frequencies of gusts with a velocity equal or larger than a given amount, of the velocity of the most frequent gust, and of a mean interval between two gusts out of the power-spectrum of wind. The theory is illustrated by an example.

---

Résumé L'auteur établit des formules permettant de calculer les grandeurs suivantes en partant du spectre énergétique du vent: Fréquence des rafales de force ou de force maximale déterminées, force des rafales les plus fréquentes ainsi que le temps moyen séparant deux rafales. Il démontre sa théorie par un exemple.

---

---

Mit 4 Textabbildungen     

Weak GPS signal tracking using FFT discriminator in open loop receiver

An open loop tracking architecture, which tracks GPS signals under weak and challenging conditions, is analyzed. The in-phase and quadrature-phase integration pair is regarded as a single tone complex signal. An FFT-based method is used as a frequency discriminator to estimate the Doppler frequency residual of the single tone signal. Another FFT-based method applies complex squaring to eliminate the effect of the navigation data bits polarities. The performance of the FFT-based discriminators is assessed in three criteria. Those criteria are the signal strength and dynamic range that can be tracked and the accuracy of the estimated Doppler frequency. In addition, the performance of the discriminators is analyzed to provide the theoretical and simulated peak detection probability. The results indicate that the FFT discriminator can track signals about 5 dB weaker than the signals that can be tracked by the complex squared FFT discriminator. In a quasi-static environment, the Doppler frequency residual can be assumed to be around zero, which can enable the FFT-based discriminators to track signals with approximately 2 dB less power. Moreover, the performance of the FFT-based discriminators is compared with the performance of two other frequency discriminators, namely the fast–slow and power-based. The comparison results indicate that these two frequency discriminators give higher frequency estimation accuracy, but they have a narrower dynamic range.     

Seismic profile analysis of the Kangra and Dehradun re-entrant of NW Himalayan Foreland thrust belt,India: A new approach to delineate subsurface geometry

In the NW Sub-Himalayan frontal thrust belt in India, seismic interpretation of subsurface geometry of the Kangra and Dehradun re-entrant mismatch with the previously proposed models. These procedures lack direct quantitative measurement on the seismic profile required for subsurface structural architecture. Here we use a predictive angular function for establishing quantitative geometric relationships between fault and fold shapes with ‘Distance–displacement method’ (D–d method). It is a prognostic straightforward mechanism to probe the possible structural network from a seismic profile. Two seismic profiles Kangra-2 and Kangra-4 of Kangra re-entrant, Himachal Pradesh (India), are investigated for the fault-related folds associated with the Balh and Paror anticlines. For Paror anticline, the final cut-off angle \(\beta =35{^{\circ }}\) was obtained by transforming the seismic time profile into depth profile to corroborate the interpreted structures. Also, the estimated shortening along the Jawalamukhi Thrust and Jhor Fault, lying between the Himalayan Frontal Thrust (HFT) and the Main Boundary Thrust (MBT) in the frontal fold-thrust belt, were found to be 6.06 and 0.25 km, respectively. Lastly, the geometric method of fold-fault relationship has been exercised to document the existence of a fault-bend fold above the Himalayan Frontal Thrust (HFT). Measurement of shortening along the fault plane is employed as an ancillary tool to prove the multi-bending geometry of the blind thrust of the Dehradun re-entrant.     

Experimental study on the instability mechanism of the major-defect fractured rock

Based on calculations of rock fracture surface and angle, incremental-load creep experiments were conducted on two groups of major-defect fractured rock specimens in an RLW-2000 rheology test system. The research investigated the fracture type and the creep properties of major-defect fractured rock and analyzed the relationships between failure load and horizontal or vertical projection distance, and between each of theme and fracture area or angle. The results showed that rock fracture was divided into three types according to the distribution, including I, II, and III types. I, II, and III types were respectively an internal fracture running through neither the upper nor lower end, one through the upper or lower end and one through both upper and lower ends, and a III type was further sub-divided into III_I and III_II types. The instantaneous strain was larger than the creep strain under the same creep loading stage. As the creep loading increased on two groups of major-defect fractured rock, the instantaneous strain decreased abruptly and then increased abruptly, while the creep strain decreased rapidly at first and later increased near-linearly. When the failure angle was larger than the friction angle, failure load was positively correlated with failure angle yet was negatively correlated with vertical projection distance. Vertical projection distance and fracture angle, which decided fracture type, controlled rock failure load. Failure load increased in turn from I type to III type, and low-type fracture determined mainly failure load in multiply-fracture specimen.     

Wavefield analysis of crosswell seismic data

Despite the numerous advantages of crosswell seismic data over surface seismic data, crosswell seismic geophysics is still underutilized and underdeveloped. The factors limiting the full utilization of crosswell data include the lack of standardized methods for processing and imaging the data. This is because crosswell data is not completely understood. To improve the understanding of crosswell data, we performed acoustic and elastic modeling of a west Texas carbonate oilfield data using finite difference methods and crosswell geometry. To account for the different wave modes in the field data, we decomposed the full data into its constituent wave modes. Results of the forward modeling show that elastic synthetic data is a better representation of crosswell field data than the popular acoustic synthetic data. Wavefield decomposition gave insight into the time-space kinematics behavior of the different wave modes that constitute the full data. Overall, the study improved our understanding of crosswell field data. The learning from this study has been utilized to perform data-driven reflection enhancement processing where the discerned characteristic of different seismic arrival is utilize to suppress unwanted and enhanced the desired wave modes. The processing reduced the complex data to only up-going P-P reflections that can be imaged to reveal the subtle geological structures of the oilfield.     

Towards a Digital Earth: using archetypes to enable knowledge interoperability within geo-observational sensor systems design

Earth System Science (ESS) observational data are often inadequately semantically enriched by geo-observational information systems to capture the true meaning of the associated data sets. Data models underpinning these information systems are often too rigid in their data representation to allow for the ever-changing and evolving nature of ESS domain concepts. This impoverished approach to observational data representation reduces the ability of multi-disciplinary practitioners to share information in a computable way. Object oriented techniques that are typically employed to model data in a complex domain (with evolving domain concepts) can unnecessarily exclude domain specialists from the design process, invariably leading to a mismatch between the needs of the domain specialists, and how the concepts are modelled. In many cases, an over simplification of the domain concept is captured by the computer scientist. This paper proposes that two-level modelling methodologies developed by health informaticians to tackle problems of domain specific use-case knowledge modelling can be re-used within ESS informatics. A translational approach to enable a two-level modelling process within geo-observational sensor systems design is described. We show how the Open Geospatial Consortium’s (OGC) Observations & Measurements (O&M) standard can act as a pragmatic solution for a stable reference-model (necessary for two-level modelling), and upon which more volatile domain specific concepts can be defined and managed using archetypes. A rudimentary use-case is presented, followed by a worked example showing the implementation methodology and considerations leading to an O&M based, two-level modelling design approach, to realise semantically rich and interoperable Earth System Science based geo-observational sensor systems.     

Parameterization of synoptic weather systems in the South Atlantic Bight for modeling applications

An event based, long-term, climatological analysis is presented that allows the creation of coastal ocean atmospheric forcing on the coastal ocean that preserves both frequency of occurrence and event time history. An algorithm is developed that identifies individual storm event (cold fronts, warm fronts, and tropical storms) from meteorological records. The algorithm has been applied to a location along the South Atlantic Bight, off South Carolina, an area prone to cyclogenesis occurrence and passages of atmospheric fronts. Comparison against daily weather maps confirms that the algorithm is efficient in identifying cold fronts and warm fronts, while the identification of tropical storms is less successful. The average state of the storm events and their variability are represented by the temporal evolution of atmospheric pressure, air temperature, wind velocity, and wave directional spectral energy. The use of uncorrected algorithm-detected events provides climatologies that show a little deviation from those derived using corrected events. The effectiveness of this analysis method is further verified by numerically simulating the wave conditions driven by the characteristic wind forcing and comparing the results with the wave climatology that corresponds to each storm type. A high level of consistency found in the comparison indicates that this analysis method can be used for accurately characterizing event-based oceanic processes and long-term storm-induced morphodynamic processes on wind-dominated coasts.     

Dipole tilt controls bow shock location and flaring angle

The dipole tilt angle has been found to affect Earth’s bow shock. This work presents a quantitative relationship between the dipole tilt angle and the bow shock location and flaring angle. We collected a large data set of bow shock crossings from four different satellites (IMP 8, Geotail, Magion 4, and Cluster), including some recent crossings obtained during 2012–2013. The results from a statistical analysis demonstrate that: (1) the subsolar standoff distance increases but the flaring angle decreases with increasing dipole tilt angle; (2) when the dipole tilt angle changes sign from negative to positive, the dayside bow shock moves toward Earth and the shift can be as much as 2.29 R _E, during which the flaring angle increases; and (3) the shape of bow shock in the northern and southern hemispheres differs. For the northern hemisphere bow shock, with increasing positive/negative dipole tilt angle, the flaring angle increases/decreases. While for the southern hemisphere, the trend is the opposite; with increasing positive/negative dipole tilt angle, the flaring angle decreases/increases. These results are helpful for future bow shock modeling that needs to include the effects of dipole tilt angle.