Tracing origins of sewage and organic matter using dissolved sterols in Masan and Haengam Bay,Korea

Masan and Haengam Bays in Korea are highly polluted and semi-enclosed. Domestic and industrial effluents are directly or indirectly discharged into the bays through sewage treatment plants (STP) and creeks. In this study, 15 dissolved sterol compounds were determined in order to understand their sources and relative contribution. Freshwater samples were taken from 13 creeks and at two STP sites on a monthly basis. Total dissolved sterol concentrations ranged from 993 to 4158 ng/L. The concentrations of sterols in winter were higher than in summer. Among the sterols analyzed, cholesterol, β-sitosterol, coprostanol and cholestanone were major compounds in creek water. Seawater samples were concurrently collected at 21 stations in Masan Bay. Total sterol concentrations ranged 118–6,956 ng/L. Inner bay showed high concentrations of sterols in summer, while outer bay showed high sterol concentrations in winter. Among the sterols, cholesterol, β-sitosterol and brassicasterol were major compounds in seawater. In order to examine the contribution of urban sewage, the concentration of coprostanol and fecal sterol ratios were calculated. Most of the creek water, inner bay and near STP outlet samples were affected by sewage. Terrestrial organic matters accounted for a high proportion of dissolved organic matter origin. Fecal origins were relatively high in the inner bay areas and in the STP outlet, while sterols of marine origin were high in the outer bay areas.     

Analysis of types and changes of village-level economy in rural Gongyi city,Henan Province since 1990

Based on the research on the rural living standard in China in terms of annual net income per capita, we define six types of village-level economy, i.e. ＂to be extremely poor＂, ＂to make a basic living＂, ＂to dress warmly and eat one＇s fill＂, ＂to try to enrich （to disengage poverty）＂, ＂to be well-off＂ and ＂to be affluent＂. The data of average annual net income of all the 292 villages between 1990 and 2004 in rural Gongyi City, Henan Province were collected, verified and classified. By using standard deviation, coefficient of variation and regression analysis, it is found that the Gongyi＇s rural economy has boosted up remarkably from the relative-poverty and absolute-poverty stages in 1990 to the well-off in 2004. However, the absolute differences between villages present a trend of enlargement, while the relative differences fluctuating. On the other hand, spatial analysis of village-level economy shows that most villages with relatively high economic development level were located along national expressway and most villages with absolute-poverty lay in remote mountainous areas in 1990. Since the 1990s, the rapid urbanization and industrialization have had strongly positive effects on rural economic growth. Initial economic foundation, natural resources and traditional techniques also contribute to village economy. From the perspective of geography, villages with location advantages, such as near urban center or industrial parks, have more chances for their economic development and the ＂core-periphery＂ economic structure has been presented in the process of rural development.     

A Note on Reviving the Goddard Satellite-Based Surface Turbulent Fluxes （GSSTF） Dataset

Accurate sea surface flux measurements are crucial for understanding the global water and energy cycles. The oceanic evaporation, which is a major component of the global oceanic fresh water flux, is useful for predicting oceanic circulation and transport. The global Goddard Satellite-based Surface Turbulent Fluxes Version-2 (GSSTF2; July 1987--December 2000) dateset that was officially released in 2001 has been widely used by scientific community for global energy and water cycle research, and regional and short period data analyses. We have recently been funded by NASA to resume processing the GSSTF dataset with an objective of continually producing a uniform dataset of sea surface turbulent fluxes, derived from remote sensing data. The dataset is to be reprocessed and brought up-to-date (GSSTF2b) using improved input datasets such as a recently upgraded NCEP/DOE sea surface temperature reanalysis, and an upgraded surface wind and microwave brightness temperature V6 dataset (Version 6) from the Special Sensor Microwave Imager (SSM/I) produced by Remote Sensing Systems (RSS). A second new product (GSSTF3) is further proposed with a finer temporal (12-h) and spatial (0.25^ox0.25^o) resolution. GSSTF2b (July 1987--December 2008) and GSSTF3 (July 1999--December 2009) will be released for the research community to use by late 2009 and early 2011, respectively.     

Misconceptions about the Hubble recession law

Almost all astronomers now believe that the Hubble recession law was directly inferred from astronomical observations. It turns out that this common belief is completely false. Those models advocating the idea of an expanding universe are ill-founded on observational grounds. This means that the Hubble recession law is really a working hypothesis. One alternative to the Hubble recession law is the tired-light hypothesis originally proposed by Zwicky (Proc. Nat. Acad. Sci. 15:773, 1929). This hypothesis leads to a universe that is an eternal cosmos continually evolving without beginning or end. Such a universe exists in a dynamical state of virial equilibrium. Observational studies of the redshift-magnitude relation for Type Ia supernovae in distant galaxies might provide the best observational test for a tired-light cosmology. The present study shows that the model Hubble diagram for a tired-light cosmology gives good agreement with the supernovae data for redshifts in the range 0<z<2. This observational test of a static cosmology shows that the real universe is not necessarily undergoing expansion nor acceleration. An erratum to this article can be found at     

A comparative study of sequential minimal optimization-based support vector machines,vote feature intervals,and logistic regression in landslide susceptibility assessment using GIS

Landslide susceptibility assessment using GIS has been done for part of Uttarakhand region of Himalaya (India) with the objective of comparing the predictive capability of three different machine learning methods, namely sequential minimal optimization-based support vector machines (SMOSVM), vote feature intervals (VFI), and logistic regression (LR) for spatial prediction of landslide occurrence. Out of these three methods, the SMOSVM and VFI are state-of-the-art methods for binary classification problems but have not been applied for landslide prediction, whereas the LR is known as a popular method for landslide susceptibility assessment. In the study, a total of 430 historical landslide polygons and 11 landslide affecting factors such as slope angle, slope aspect, elevation, curvature, lithology, soil, land cover, distance to roads, distance to rivers, distance to lineaments, and rainfall were selected for landslide analysis. For validation and comparison, statistical index-based methods and the receiver operating characteristic curve have been used. Analysis results show that all these models have good performance for landslide spatial prediction but the SMOSVM model has the highest predictive capability, followed by the VFI model, and the LR model, respectively. Thus, SMOSVM is a better model for landslide prediction and can be used for landslide susceptibility mapping of landslide-prone areas.     

Surface and groundwater quality characterization of Deoria District,Ganga Plain,India

A water quality investigation was carried out in the Deoria district, Ganga plain, to assess the suitability of surface and groundwaters for domestic, agricultural, and industrial purposes. As much as 50 representative samples from river and groundwater were collected from various stations to monitor the water chemistry of various ions, comprising Ca²⁺, Mg²⁺, Na⁺, K⁺, HCO₃ ⁻, SO₄ ²⁻, NO₃ ⁻, Cl⁻, F⁻, and trace metals, such as Fe, Cu, Mn, Zn, Cd, and Pb. The results showed that electrical conductance (EC), total dissolved solids (TDS), HCO₃ ⁻, Mg²⁺, Na⁺, and total hardness (TH) are above the maximum desirable limit, and apart from Fe and Mn all other trace metals are within the maximum permissible limit for drinking water. The calculated values for sodium absorption ratio (SAR), salinity, residual sodium carbonate (RSC), and permeability index (PI) indicate well to permissible use of water for irrigation. High values of Na%, RSC, and Mg-hazard (MH) at some stations restrict its use for agricultural purpose. Anthropogenic activities affect the spatial variation of water quality. Economic and social developments of the study area is closely associated with the characteristics of the hydrological network.     

Errors and correction of precipitation measurements in China

In order to discover the range of various errors in Chinese precipitation measurements and seek a correction method, 30 precipitation evaluation stations were set up countrywide before 1993. All the stations are reference stations in China. To seek a correction method for wind-induced error, a precipitation correction instrument called the ＂horizontal precipitation gauge＂ was devised beforehand. Field intercomparison observations regarding 29,000 precipitation events have been conducted using one pit gauge, two elevated operational gauges and one horizontal gauge at the above 30 stations. The range of precipitation measurement errors in China is obtained by analysis of intercomparison measurement results. The distribution of random errors and systematic errors in precipitation measurements are studied in this paper. A correction method, especially for wind-induced errors, is developed. The results prove that a correlation of power function exists between the precipitation amount caught by the horizontal gauge and the absolute difference of observations implemented by the operational gauge and pit gauge. The correlation coefficient is 0.99. For operational observations, precipitation correction can be carried out only by parallel observation with a horizontal precipitation gauge. The precipitation accuracy after correction approaches that of the pit gauge. The correction method developed is simple and feasible.     

Assessment of rock slope stability by probabilistic-based Slope Stability Probability Classification method along highway cut slopes in Adilcevaz-Bitlis (Turkey)

Rock slope stability is of great concern along highway routes as stability problems on cut slopes may cause fatal events as well as loss of property. In rock slope engineering, stability evaluations are commonly performed by means of analytical or numerical analyses, principally considering the factor of safety concept. As a matter of fact, the probabilistic assessment of slope stability is progressively getting popularity due to difficulties in assigning the most appropriate values to design parameters in analytical or numerical methods. Additionally, the effect of heterogeneities in rock masses and discontinuities on the analysis results is minimized through the probabilistic concept. In this study, slope stability of high and steep sedimentary rock cut slopes along a state highway in Adilcevaz-Bitlis (Turkey) was evaluated on the basis of probabilistic approach using the Slope Stability Probability Classification (SSPC) system. The probabilistic assessment indicates major slope stability problems because of discontinuity controlled and discontinuity orientation independent mass movements. Almost all studied cut slopes suffer from orientation-independent stability problems with very low stability probabilities. Additionally, the probability of planar and toppling failures is significantly high with respect to the SSPC system. The stability problems along the investigated rock slopes were also verified by field reconnaissance. Remedial measures such as slope re-design and reinforcement at the studied locations should be taken to prevent hazardous events along the highway. On the other hand, the probabilistic approach may be a useful tool during rock slope engineering to overcome numerous uncertainties when probabilistic and analytic results are compared.     

Broad search for unstable resonant orbits in the planar circular restricted three-body problem

Unstable resonant orbits in the circular restricted three-body problem have increasingly been used for trajectory design using optimization and invariant manifold techniques. In this study, several methods for computing these unstable resonant orbits are explored including grid searches, flyby maps, and continuation. Families of orbits are computed focusing on orbits with multiple loops near the secondary in the Jupiter–Europa system, and their characteristics are explored. Different parameters such as period and stability are examined for each set of resonant orbits, and the continuation of several specific orbits is explored in more detail.     

Non-Linear Theory and Power-Law Models for Information Integration and Mineral Resources Quantitative Assessments

Singular physical or chemical processes may result in anomalous amounts of energy release or mass accumulation that, generally, are confined to narrow intervals in space or time. Singularity is a property of different types of non-linear natural processes including cloud formation, rainfall, hurricanes, flooding, landslides, earthquakes, wildfires, and mineralization. The end products of these non-linear processes can be modeled as fractals or multifractals. Hydrothermal processes in the Earth’s crust can result in ore deposits characterized by high concentrations of metals with fractal or multifractal properties. Here we show that the non-linear properties of the end products of singular mineralization processes can be applied for prediction of undiscovered mineral deposits and for quantitative mineral resource assessment, whether for mineral exploration or for regional, national and global planning for mineral resource utilization. In addition to the general theory and framework for the non-linear mineral resources assessment, this paper focuses on several power-law models proposed for characterizing non-linear properties of mineralization and for geoinformation extraction and integration. The theories, methods, and computer system discussed in this paper were validated using a case study dealing with hydrothermal Au mineral potential in southern Nova Scotia, Canada.