The 1987–88 Alaskan Bight tsunamis: Deep ocean data and model comparisons

Excellent deep ocean records have been obtained of two tsunamis recently generated in the Alaskan Bight on 30 November 1987 and 6 March 1988, providing the best available data set to date for comparison with tsunami generation/propagation models. Simulations have been performed with SWAN, a nonlinear shallow water numerical model, using source terms estimated by a seafloor deformation model based on the rectangular fault plane formalism. The tsunami waveform obtained from the model is quite sensitive to the specific source assumed. Significant differences were found between the computations and observations of the 30 November 1987 tsunami, suggesting inadequate knowledge of the source characteristics. Fair agreement was found between the data and the model for the first few waves of the 6 March 1988 tsunami. Model estimates of the seismic moment and total slip along the fault plane are also in fair agreement with those derived from the published Harvard centroid solution for the 6 March 1988 event, implying that the computed seafloor deformation does bear some similarity to the actual source.     

An urban geomonumental route focusing on the petrological and decay features of traditional building stones used in Madrid, Spain

The stone traditionally used to build cities contributes to their personality and attests to the geological substrate on which they stand. While stone decay in the built heritage can be attributed to a number of causes, anthropic activity has a particularly significant impact. The geomonumental routes project is one of the initiatives proposed in recent years for urban routes that convey geological fundamentals by observing the rocks present in heritage structures. Its innovative approach addresses traditional stone properties, original quarrying sites and mechanisms of decay. Madrid’s Royal Palace is a fine example of the use of traditional building stone in the centre of the Iberian Peninsula. In the geomonumental route proposed, the building doubles as an in situ laboratory that affords an overview of the main petrological properties of the two traditional stones most commonly used in the city’s built heritage, the forms of decay they are subject and the factors underlying such alterations. This route constitutes a tool for showing the main petrological features and decay forms in traditional building stones found in urban heritage façades, with a special focus on anthropic impact, primarily air pollution and the use of conservation treatments that time has proven to be unsuitable.     

Non-stationary frequency response function

Using the Duhamel’s integral concept, a non-stationary frequency response function (complete-FRF) for the dynamic response of a single degree of freedom system initially at rest has been developed. Although the procedure is devised to be applied in the frequency domain, this new function is time dependent and can be employed to calculate the transient response of a system in a forced vibration case. The method has been successfully checked with two different cases of loading in the time domain which have either analytical solution or accurate numerical solution using Newmark’s algorithm. The method has been compared with the solution obtained from the commonly used steady frequency response function, and a detailed analysis of the four parameters that appear in the complete-FRF function: time, damping ratio, natural period and input frequency is presented. Finally, the proposed non-steady FRF has been applied to the calculation of an elastic displacement response spectrum to confirm the great influence of the natural period of the system and the frequency content of the solicitation in frequency-domain spectral analysis.     

Copper Biosorption by Spent Coffee Ground: Equilibrium,Kinetics, and Mechanism

The potential use of spent coffee ground (SCG) for the removal of copper has been investigated as a low‐cost adsorbent for the biosorption of heavy metals. Adsorption batch experiments were conducted to determine isotherms and kinetics. The biosorption equilibrium data were found to fit well the Freundlich model and an experimental maximum biosorption capacity of copper ions 0.214 mmol/g was achieved. The biosorption kinetics of SCG was studied at different adsorbate concentrations (0.1–1.0 mM) and stirring speeds (100–400/min). The results showed an increase in the copper ion uptake with raising the initial metal concentration and the kinetic data followed the pseudo‐second order rate expression. The effect of stirring speed was a significant factor for the external mass transfer resistance at 100/min and coefficients were estimated by the Mathews and Weber model. Biosorption of copper ions onto SCG was observed to be related mainly with the release of calcium and hydrogen ions suggesting that biosorption performance by SCG can be attributed to ion‐exchange mechanism with calcium and hydrogen ions neutralizing the carboxyl and hydroxyl groups of the biomass.     

Removal of Carbamazepine,Naproxen, and Trimethoprim from Water by Amberlite XAD‐7: A Kinetic Study

The adsorption kinetics of carbamazepine, naproxen, and trimethoprim in aqueous solution by Amberlite? XAD‐7 has been studied. The influence of adsorbent dose (1–3 g/L), stirring rate (80–240 rpm), pH (2–9), temperature (20–60°C), and initial concentration (25–75 ppm) on the adsorption kinetics has been analyzed. The removal efficiency in the first 2 h reaches 85% for carbamazepine, 60% for naproxen, and 70% for trimethoprim. pH appears to be the most important factor conditioning the removal of these latter solutes, whereas carbamazepine adsorption seems to be independent of the pH of the adsorptive solution. Initial concentration and operation temperature moderately influence the adsorption process. Finally, stirring rate scarcely affects the process. The experimental data have been fitted to four kinetic models, namely pseudo‐first and pseudo‐second order, intra‐particle diffusion and Bangham's. The model providing the best fit is the pseudo‐second order one. Again, pH is the factor that affects the adsorption rate in a more remarkable manner although other parameters such as temperature and stirring rate also contribute to accelerate the removal of the solutes. Under the optimal operation conditions, Amberlite? XAD‐7 exhibits a promising ability for the removal of the pharmaceuticals under study.     

The potential for the use of Open Source Software and Open Specifications in creating Web‐based cross‐border health spatial information systems

Globalization is contributing to the blurring of borders making irrelevant the distinctions between domestic and international health problems. Cross‐border and global health spatial information systems (CBHSIS) are required to address the new global health challenges. There is a need to build and document alternatives for addressing the technological, economic, and sociocultural–political challenges encountered in the creation and deployment of these systems. This paper documents the building of a prototype Web‐based multimedia GIS system for use in a public health context using Open Source Software and Open Specifications and its deployment across the US–Mexico border. These technologies offer advantages in addressing several of the challenges previously mentioned. We highlight the technological and sociocultural–political issues important in successful collaboration across borders and cultures and in the creation of interoperable CBHSIS.     

An analytic solution to the alibi query in the space–time prisms model for moving object data

Moving objects produce trajectories, which are stored in databases by means of finite samples of time-stamped locations. When speed limitations in these sample points are also known, space–time prisms (also called beads) (Pfoser and Jensen 1999 Pfoser, D. and Jensen, C.S. 1999. “Capturing the uncertainty of moving-object representations”. In Advances in spatial databases (SSD’99), Hong Kong, China, July 20–23, 1999, Vol. 1651, 111–132. Lecture notes in Computer Science.  [Google Scholar], Egenhofer 2003 Egenhofer, M. 2003. “Approximation of geopatial lifelines”. In SpadaGIS, workshop on spatial data and geographic information systsems, 4SpaDaGIS–Workshop on Spatial Data and Geographic Information Systems, Milano, Italy, March 2003. University of Genova.  [Google Scholar], Miller 2005 Miller, H. 2005. A measurement theory for time geography. Geographical Analysis, 37(1): 17–45. [Crossref], [Web of Science ®] , [Google Scholar]) can be used to model the uncertainty about an object's location in between sample points. In this setting, a query of particular interest that has been studied in the literature of geographic information systems (GIS) is the alibi query. This boolean query asks whether two moving objects could have physically met. This adds up to deciding whether the chains of space–time prisms (also called necklaces of beads) of these objects intersect. This problem can be reduced to deciding whether two space–time prisms intersect.

The alibi query can be seen as a constraint database query. In the constraint database model, spatial and spatiotemporal data are stored by boolean combinations of polynomial equalities and inequalities over the real numbers. The relational calculus augmented with polynomial constraints is the standard first-order query language for constraint databases and the alibi query can be expressed in it. The evaluation of the alibi query in the constraint database model relies on the elimination of a block of three exªistential quantifiers. Implementations of general purpose elimination algorithms, such as those provided by QEPCAD, Redlog, and Mathematica, are, for practical purposes, too slow in answering the alibi query for two specific space–time prisms. These software packages completely fail to answer the alibi query in the parametric case (i.e., when it is formulated in terms of parameters representing the sample points and speed constraints).

The main contribution of this article is an analytical solution to the parametric alibi query, which can be used to answer the alibi query on two specific space–time prisms in constant time (a matter of milliseconds in our implementation). It solves the alibi query for chains of space–time prisms in time proportional to the sum of the lengths of the chains. To back this claim up, we implemented our method in Mathematica alongside the traditional quantifier elimination method. The solutions we propose are based on the geometric argumentation and they illustrate the fact that some practical problems require creative solutions, where at least in theory, existing systems could provide a solution.     

Spectro-Polarimetric Observations and Non-Lte Modeling of Ellerman Bombs

Ellerman bombs are bright emission features observed in the wings of Hα, usually in the vicinity of magnetic concentrations. Here we show that they can also be detected in the Ca II infrared triplet lines, which are easier to interpret and therefore allow for more detailed diagnostics. We present full Stokes observations of the 849.8 and 854.2 nm lines acquired with the new spectro-polarimeter SPINOR. The data show no significant linear polarization at the level of 3 × 10⁻⁴. The circular polarization profiles exhibit measureable signals with a very intricate pattern of peaks. A non-LTE analysis of the spectral profiles emerging from these features reveals the presence of strong downflows (∼10 {km s⁻¹}) in a hot layer between the upper photosphere and the lower chromosphere. Visiting Astronomers, National Solar Observatory, operated by the Association of Universities for Research in Astronomy, Inc. (AURA), under cooperative agreement with the National Science Foundation. The National Center for Atmospheric Research (NCAR) is sponsored by the National Science Foundation, USA.