Analytical study of the energy rate balance equation for the magnetospheric storm-ring current

We present some results of the analytical integration of the energy rate balance equation, assuming that the input energy rate is proportional to the azimuthal interplanetary electric field, E_y, and can be described by simple rectangular or triangular functions, as approximations to the frequently observed shapes of E_y, especially during the passage of magnetic clouds. The input function is also parametrized by a reconnection-transfer efficiency factor (which is assumed to vary between 0.1 and 1). Our aim is to solve the balance equation and derive values for the decay parameter compatible with the observed Dst peak values. To facilitate the analytical integration we assume a constant value for through the main phase of the storm. The model is tested for two isolated and well-monitored intense storms. For these storms the analytical results are compared to those obtained by the numerical integration of the balance equation, based on the interplanetary data collected by the ISEE-3 satellite, with the values parametrized close to those obtained by the analytical study. From the best fit between this numerical integration and the observed Dst the most appropriate values of are then determined. Although we specifically focus on the main phase of the storms, this numerical integration has been also extended to the recovery phase by an independent adjust. The results of the best fit for the recovery phase show that the values of may differ drastically from those corresponding to the main phase. The values of the decay parameter for the main phase of each event, _m, are found to be very sensitive to the adopted efficiency factor, , decreasing as this factor increases. For the recovery phase, which is characterized by very low values of the power input, the response function becomes almost independent of the value of and the resulting values for the decay time parameter, _r, do not vary greatly as varies. As a consequence, the relative values of between the main and the recovery phase, _m/_r, can be greater or smaller than one as varies from 0.1 to 1.     

The development of folds in bedded chert and related rocks in the Malaguide Complex, southern Spain

Folds and folding mechanism in a chert sequence and related rocks of the Maláguide Complex (the uppermost tectonic unit of the Betic Zone) have been investigated. The geometric study shows that folds that developed in the chert sequence are usually angular in shape and asymmetric. Chevron and conjugate folds are common.Folding in bedded chert is explained in terms of a suggested model:

1. (1) Development of folds by kink and conjugate kinking.

2. (2) As the shortening increases, the interlimb angles decrease; in the kink folds this is caused by a reduction of the angle between the layers within the kink and the kink boundaries. There seems to be a relationship between this angle and the asymmetrical thinning-out in the limbs of many folds: the smaller is the angle between the kink boundary and the layers within the kink band, the larger is the reduction of the thickness in these layers.

Single limestone layers embedded in slate deform very probably by a buckling mechanism, implying tangential longitudinal strain and an additional flattening.     

Diet of Haplognathia ruberrima (Gnathostomulida) in a Caribbean marine mangrove

Haplognathia ruberrima is a cosmopolitan gnathostomulid species found in sulfur bacterial mats in mangroves in Guadeloupe (French West Indies). Haplognathia ruberrima presents a δ¹³C value lower than all measured meiofaunal grazers and lower than the available measured food sources of this environment. This low δ¹³C value can not be due to specific ingestion of ¹³C‐depleted methanogenic bacteria because abundances of those bacteria are reduced in surficial and deep sediments as revealed by δ¹³C of bacterial fatty acid. According to scanning electron microscope observations, no bacterial ectosymbionts were observed at the surface of the gnathostomulids, and transmission electron microscope views revealed the absence of bacterial endosymbionts. Energy‐dispersive X‐ray spectroscopy analysis detected low levels of sulfur (0.32%±0.8) in biological tissues of H. ruberrima, confirming the absence of thioautotrophic bacterial symbionts in these animals. Consequently, the low δ¹³C value of H. ruberrima can not be due to the presence of sulfur‐oxidizing symbionts but more probably to the selective and exclusive consumption of free‐living, sulfur‐oxidizing bacteria.     

Low calcification rates and calcium carbonate production in Porites panamensis at its northernmost geographic distribution

Porites panamensis is a hermatypic coral present in the eastern Pacific Ocean. Skeletal growth parameters have been reported, but studies of the relationship between annual calcification rates and environmental controls are scarce. In this study, we investigated three aspects of the annual calcification rates of P. panamensis: growth parameters among three P. panamensis populations; the sea surface temperature as a calcification rate control spanning a latitudinal gradient; and calcium carbonate production among three sites. Growth parameters varied among the sites due to the colony growth form. Massive colonies in the north showed a higher calcification rate than encrusting colonies in the south (mean: 1.22–0.49 g CaCO₃ · cm^?2 · yr^?1), where variations in calcification rates were related to growth rate (0.91–0.38 cm · yr^?1) rather than to skeletal density differences (overall mean ± SD, 1.31 ± 0.04 g CaCO₃ · cm^?3). Our results showed a positive linear relationship between annual calcification rates and sea surface temperatures within these P. panamensis populations. Differences were related to distinct oceanographic environments (within and at the entrance of the Gulf of California) with different sea surface temperature regimes and other chemical properties. Different populations calcified under different environmental conditions. Calcium carbonate production was dependent upon the calcification rate and coral cover and so carbonate production was higher in the north (coral cover 12%) than in the south (coral cover 3.5). Thus, the studied sites showed low calcium carbonate production (0.25–0.43 kg CaCO₃ · m^?2 · yr^?1). Our results showed reduced calcification rates, regional temperature regime control over calcification rates, different growth forms, low coral cover and low calcium carbonate production rates in P. panamensis.     

Probable Neolithic footprints preserved in inter-tidal peat at Kenfig, South Wales (UK)

Holocene footprints have been reported from several locations around the UK coast preserved within inter-tidal sediments. These sediments are normally fine-grained silts, sands and clays. Here we report potential human footprints preserved in the lower of two inter-tidal peat units exposed on the foreshore at Kenfig in South Wales. The lower peat layer pre-dates 3810 ± 40 BP and its maximum age is constrained by two dates, one of 4930 ± 50 BP and another of 5110 ± 50 BP. The prints may have formed at any point within this time interval. Both peat units formed in a salt marsh, or fen environment, as indicated by the analysis of both diatoms and pollen and have been tentatively assigned to the middle Wentlooge Formation within the Holocene lithostratigraphy established for the Severn Estuary Holocene sequence. The footprints were digitised using an optical laser scanner and are compared to other Holocene human footprints exposed on the Sefton Coast in North West England. In comparison the Kenfig prints have poor anatomical form which may be the result of both the substrate and post-depositional modification. The paper demonstrates the value of using optical laser scanning in the data capture and analysis of transitory archaeological and geological trace evidence.     

Early-Morning Flow Transition in a Valley in Low-Mountain Terrain Under Clear-Sky Conditions

We investigate the evolution of the early-morning boundary layer in a low-mountain valley in south-western Germany during COPS (convective and orographically induced precipitation study) in summer 2007. The term low-mountain refers to a mountainous region with a relief of gentle slopes and with an absolute altitude that remains under a specified height (usually 1,500 m a.s.l.). A subset of 23 fair weather days from the campaign was selected to study the transition of the boundary-layer flow in the early morning. The typical valley atmosphere in the morning hours was characterized by a stable temperature stratification and a pronounced valley wind system. During the reversal period—called the low wind period—of the valley wind system (duration of 1–2 h), the horizontal flow was very weak and the conditions for free convection were fulfilled close to the ground. Ground-based sodar observations of the vertical wind show enhanced values of upward motion, and the corresponding statistical properties differ from those observed under windless convective conditions over flat terrain. Large-eddy simulations of the boundary-layer transition in the valley were conducted, and statistical properties of the simulated flow agree with the observed quantities. Spatially coherent turbulence structures are present in the temporal as well as in the ensemble mean analysis. Thus, the complex orography induces coherent convective structures at predictable, specific locations during the early-morning low wind situations. These coherent updrafts, found in both the sodar observations and the simulation, lead to a flux counter to the gradient of the stably stratified valley atmosphere and reach up to the heights of the surrounding ridges. Furthermore, the energy balance in the surface layer during the low wind periods is closed. However, it becomes unclosed after the onset of the valley wind. The partition into the sensible and the latent heat fluxes indicates that missing flux components of sensible heat are the main reason for the unclosed energy balance in the considered situations. This result supports previously published investigations on the energy balance closure.     

Catchment precipitation processes in the San Francisco valley in southern Ecuador: combined approach using high-resolution radar images and in situ observations

The precise estimation of precipitation quantities in tropical mountain regions is in great demand by ecological and hydrological studies, due to the heterogeneity of the rainfall distribution and the lack of meteorological station data. This study uses radar images and ground station data to provide the required high-resolution precipitation maps. Also wind data are taken into account, due to its influence on the precipitation formation and to demonstrate the relation between synoptic wind, topography and the precipitation distribution inside small mountain valleys. The study analyses the rainfall distribution and amounts of 4 days inside the San Francisco Valley, a small catchment in the tropical Andes of southern Ecuador, representing different seasons and the typical atmospheric flows, which are correlated to the annual precipitation map. The results show that the rainfall distribution and amounts are generally defined by the wind direction and velocity, besides the topographic location in relation to the main barriers and pathways. The dominant wind direction causes a division of the catchment in a wetter eastern and a dryer western part. Moreover, the annual seasons are reversed; the main rainy season for the eastern part occurs between June and August, while the western part reaches the precipitation maximum between January and March. This may have influence on the species composition at the different slopes and the annual hydrological cycle inside the catchment.     

Summer precipitation variability over South America on long and short intraseasonal timescales

A dipole pattern in convection between the South Atlantic convergence zone and the subtropical plains of southeastern South America characterizes summer intraseasonal variability over the region. The dipole pattern presents two main bands of temporal variability, with periods between 10 and 30 days, and 30 and 90 days; each influenced by different large-scale dynamical forcings. The dipole activity on the 30–90-day band is related to an eastward traveling wavenumber-1 structure in both OLR and circulation anomalies in the tropics, similar to that associated with the Madden–Julian oscillation. The dipole is also related to a teleconnection pattern extended along the South Pacific between Australia and South America. Conversely, the dipole activity on the 10–30-day band does not seem to be associated with tropical convection anomalies. The corresponding circulation anomalies exhibit, in the extratropics, the structure of Rossby-like wave trains, although their sources are not completely clear.     

Using distributed temperature sensing (DTS) technology in acid gas injection design

The use of slickline distributed temperature sensing (SL-DTS) technology is becoming widespread due to its ease of operation and ability to acquire real-time multiple temperature traces inside the wellbore. Injection of treated acid gas (TAG)—a mixture of CO₂ and H₂S—into geologic formations has become an attractive technical and economic option for oil and gas producers and processors who are faced with regulations concerning excess sulfur and greenhouse gas emissions. Acid gas injection (AGI) into geologic formations is more economical and more flexible in dealing with varying TAG compositions than sulfur recovery units (SRUs) using the Claus process. SRUs do not achieve air quality standards and have high operation and maintenance costs. In addition, there is low demand for sulfur and sulfur disposal costs are high. The results of the analysis of SL-DTS data acquired in conjunction with step rate and pressure falloff (PFO) tests are presented in this paper. These tests were conducted to evaluate the injection potential of geologic formations. The injection zone consisted of a carbonate formation characterized by Karst features, vugs, and natural fractures. The SL-DTS data during the initial injection flow rate for the step rate test (SRT) indicated that high permeability zones accepted fluid at lower injection rates. An increasing number of discrete zones began to accept fluid as the injection rate was increased. The results of the SRT provided the fracture pressure of the formation. This information was used to design an AGI program that would avoid fracturing the formation while allowing for the required volume of TAG to be injected. The results of the PFO test provided information on the reservoir pressure and permeability and also indicated the presence of one or more hydraulic fractures. This case study of SL-DTS measurements made during a SRT and a PFO test for the design of an AGI well provides valuable insights into the potential of DTS technology and its use in AGI and carbon capture/sequestration (CCS) operations. Its findings could be applied to analyze injection potential of geological formations not only for AGI projects but also for CCS, and CO₂ enhanced oil recovery opportunities.