Timing of glacier advances and climate in the High Tatra Mountains (Western Carpathians) during the Last Glacial Maximum

During the Last Glacial Maximum (LGM), long valley glaciers developed on the northern and southern sides of the High Tatra Mountains, Poland and Slovakia. Chlorine-36 exposure dating of moraine boulders suggests two major phases of moraine stabilization, at 26–21 ka (LGM I — maximum) and at 18 ka (LGM II). The dates suggest a significantly earlier maximum advance on the southern side of the range. Reconstructing the geometry of four glaciers in the Sucha Woda, Pańszczyca, Mlynicka and Velicka valleys allowed determining their equilibrium-line altitudes (ELAs) at 1460, 1460, 1650 and 1700 m asl, respectively. Based on a positive degree-day model, the mass balance and climatic parameter anomaly (temperature and precipitation) has been constrained for LGM I advance. Modeling results indicate slightly different conditions between northern and southern slopes. The N–S ELA gradient finds confirmation in slightly higher temperature (at least 1 °C) or lower precipitation (15%) on the south-facing glaciers during LGM I. The precipitation distribution over the High Tatra Mountains indicates potentially different LGM atmospheric circulation than at the present day, with reduced northwesterly inflow and increased southerly and westerly inflows of moist air masses.     

Coronal Mass Ejections Associated with Slow Long Duration Flares

It is well known that there is a temporal relationship between coronal mass ejections (CMEs) and associated flares. The duration of the acceleration phase is related to the duration of the rise phase of a flare. We investigate CMEs associated with slow long duration events (LDEs), i.e. flares with the long rising phase. We determined the relationships between flares and CMEs and analyzed the CME kinematics in detail. The parameters of the flares (GOES flux, duration of the rising phase) show strong correlations with the CME parameters (velocity, acceleration during main acceleration phase, and duration of the CME acceleration phase). These correlations confirm the strong relation between slow LDEs and CMEs. We also analyzed the relation between the parameters of the CMEs, i.e. a velocity, an acceleration during the main acceleration phase, a duration of the acceleration phase, and a height of a CME at the end of the acceleration phase. The CMEs associated with the slow LDEs are characterized by high velocity during the propagation phase, with the median equal to 1423 km?s^?1. In half of the analyzed cases, the main acceleration was low (a<300 m?s^?2), which suggests that the high velocity is caused by the prolonged acceleration phase (the median for the duration of the acceleration phase is equal 90 minutes). The CMEs were accelerated up to several solar radii (with the median ≈?7 R _⊙), which is much higher than in typical impulsive CMEs. Therefore, slow LDEs may potentially precede extremely strong geomagnetic storms. The analysis of slow LDEs and associated CMEs may give important information for developing more accurate space-weather forecasts, especially for extreme events.     

Paleolithic hunting in a southern Moravian landscape: The case of Milovice IV,Czech Republic

The Dolní Věstonice–Pavlov–Milovice area (Czech Republic) on the slopes of the Pavlov Hills provides an opportunity for correlating the geomorphology of the Dyje River valley with Gravettian settlement patterns. Although the sites vary in size and complexity, they create a regular chain of strategic locations at elevations between 200 m and 240 m asl. In 2009, a road collapsed into deserted cellars inside the village of Milovice and revealed a complex of archaeological layers deep within loess, at an elevation of only 175 m asl. This paper presents an analysis of this atypical archaeological site location and compares the results with the other sites. We argue that this location allowed direct contact with mammoth herds concentrated on the floodplain, while the aquatic environment offered possibilities for gathering plants and fishing. This site represents a new aspect of organized settlement, hunting strategies, and short‐distance human movements during the Gravettian within this area. © 2011 Wiley Periodicals, Inc.     

CN, C2 radicals and dust in Comets Shoemaker-Levy 1991 T2 and P/deVico 1995 S1

The results of the multiaperture photometry of Comet Shoemaker-Levy 1991 T2 in the pre-perihelion and P/deVico in the post-perihelion period with the narrowband CN, C₂ and Blue Continuum (BC) IHW filters are presented. A Haser model of the molecular coma was used for the determination of the parent and daughter scale-lengths and production rates of the radicals. The comets showed some substantial differences between their parent scale-lengths. The CN parent scale-length (at 1.0 AU) was 16×¹⁰³ km for Comet Shoemaker-Levy and 39×¹⁰³ for P/deVico, the C₂ parent scale-lengths were respectively 29×¹⁰³ and 54×¹⁰³ km. Such divergences could be interpreted in the frame of different scenarios of emission of cometary parents, either from a nucleus or from a volume source. The daughter scale-lengths for these comets were quite similar, namely: 306×¹⁰³ and 318×¹⁰³ km for CN and 69×¹⁰³ and 66×¹⁰³ km for C₂. We determined the Afρ parameter for apertures of different radii. A Monte Carlo model of the dust coma was used to obtain the dust ejection velocity. It was of the order of 0.1 km s⁻¹ for both comets. The power index of the distribution of the β-parameter of dust particles (ratio of light pressure to the solar gravitation) was of the order of 3 for C/Shoemaker-Levy and close to 2 for P/deVico. The dependence on heliocentric distance (rh) of the radical and dust production rates for P/deVico in the range of 0.7-1.0 AU was described by the power law function with a power index equal to: 5.55±0.14 for CN, 5.70±0.24 for C₂ and 5.22±0.19 for dust. Relative abundances of the dynamically new Comet Shoemaker-Levy and short-period P/deVico were quite similar with an enhancement of C₂ comparing with standard values taken from A'Hearn et al. (1995).     

EPR and magnetism of the nanostructured natural carbonaceous material shungite

The X-band EPR and magnetic susceptibility in the temperature range 4.2–300 K study of the shungite-I, natural nanostructured material from the deposit of Shunga are reported. Obtained results allow us to assign the EPR signal to conduction electrons, estimate their number, N _P, and evaluate the Pauli paramagnetism contribution to shungite susceptibility. A small occupation (~5%) of the localized nonbonding π states in the zigzag edges of the open-ended graphene-like layers and/or on σ (sp ^2+x ) orbitals in the curved parts of the shungite globules has been also revealed. The observed temperature dependence of the EPR linewidth can be explained by the earlier considered interaction of conduction π electrons with local phonon modes associated with the vibration of peripheral carbon atoms of the open zigzag-type edges and with peripheral carbon atoms cross-linking different nanostructures. The relaxation time T ₂ and diffusion time T _D are found to have comparable values (2.84 × 10⁻⁸ and 1.73 × 10⁻⁸ s at 5.2 K, respectively), and similar dependence on temperature. The magnetic measurements have revealed the suppression of orbital diamagnetism due to small amount of large enough fragments of the graphene layers.     

Petrogenesis of continental mafic dykes from the Izera Complex, Karkonosze-Izera Block (West Sudetes, SW Poland)

The Izera Complex (West Sudetes) contains widespread bodies of metagabbro, metadolerite and amphibolite (the Izera metabasites), and less abundant dykes of weakly altered dolerites, emplaced in a continental setting. The primary magmas of the Izera metabasites were probably formed through adiabatic decompression melting of upwelling asthenosphere (mantle plume) that was associated with the early Palaeozoic fragmentation of Gondwana (initial rift). The rocks are mildly alkaline, transitional-to-tholeiitic basalts and have OIB-like trace element patterns. Trace element modelling reveals that the mafic magmas were generated by variable degrees of partial melting (1–7%) of fertile, garnet-bearing asthenospheric source similar in composition to primitive mantle. Together with an increase in degree of partial melting, the compositional affinity of the magmas and the depth of segregation changed progressively from ca. 70–90 km (mildly alkaline magmas of the metadolerites and amphibolites) to ca. 60–75 km (transitional-to-tholeiitic magmas of the metagabbros). The systematics of incompatible versus compatible element distribution, and major and trace element modelling, indicate that some rocks experienced low-pressure (<5 kbar) differentiation resulting in up to 50% fractionation of clinopyroxene, olivine and minor plagioclase and ilmenite. The genetically distinct weakly altered dolerites are basaltic andesite in composition and possibly related to late- or post-orogenic events in the Karkonosze-Izera Block. These rocks are calc-alkaline, with relatively flat MREE–HREE patterns, enrichment in LREE and other highly incompatible elements relative to primitive mantle, and negative Nb–Ta, Ti, P anomalies. The geochemical features and geochemical modelling, indicate that their primary magmas segregated at depths ≤70 km and were produced by ~2% melting of a metasomatized sublithospheric mantle source presumably containing small amounts of hydrated phases. Although the present study is inconclusive as to the origin of the metasomatic component in the source (? slab-derived fluid/melts, OIB-like alkaline melt percolation of subcontinental lithosphere), the genesis of the Izera basaltic andesites is seemingly related to upwelling of asthenosphere and heat flow triggered by a postulated decoupling of the mantle lithosphere and post-collisional extensional collapse and uplift in the Karkonosze-Izera Block.     

An attempt to dendroclimatic reconstruction of winter temperature based on multispecies tree-ring widths and extreme years chronologies (example of Upper Silesia, Southern Poland)

This study aims at investigating pre-instrumental tree-ring based winter thermal conditions from Upper Silesia, southern Poland. The Scots pine, pedunculate oak and sessile oak ring widths and the extreme index were used to reconstruct winter mean temperature back to A.D. 1770. The climate response analysis showed that the pine is the most sensitive to February (0.36) and March (0.41) temperature, the oaks were found to be sensitive to the previous December (0.27) and January (0.23) temperature. It was found out that the combination of temperature sensitive species and an additional extreme index in regression can improve the reconstruction, with an emphasis on more reliable reconstruction of extreme values. The elimination of variance reduction and precise reconstruction of actual values of temperature is possible by scaling. The obtained calibration/verification results suggest that, through the application of the long-term composite chronologies a detailed study of the climate variability in Upper Silesia in past centuries can be provided.     

Modelling hydraulic and capillary-driven two-phase fluid flow in unsaturated concretes at the meso-scale with a unique coupled DEM-CFD technique

The goal of the research was to demonstrate the impact of thin porous interfacial transition zones (ITZs) between aggregates and cement matrix on fluid flow in unsaturated concrete caused by hydraulic/capillary pressure. To demonstrate this impact, a novel coupled approach to simulate the two-phase (water and moist air) flow of hydraulically and capillary-driven fluid in unsaturated concrete was developed. By merging the discrete element method (DEM) with computational fluid dynamics (CFD) under isothermal settings, the process was numerically studied at the meso-scale in two-dimensional conditions. A flow network was used to describe fluid behaviour in a continuous domain between particles. Small concrete specimens of a simplified particle mesostructure were subjected to fully coupled hydro-mechanical simulation tests. A simple uniaxial compression test was used to calibrate the pure DEM represented by bonded spheres, while a permeability and sorptivity test for an assembly of spheres was used to calibrate the pure CFD. For simplified specimens of the pure cement matrix, cement matrix with aggregate, and cement matrix with aggregate and ITZ of a given thickness, DEM/CFD simulations were performed sequentially. The numerical results of permeability and sorptivity were directly compared to the data found in the literature. A satisfactory agreement was achieved. Porous ITZs in concrete were found to reduce sorption by slowing the capillary-driven fluid flow, and to speed the full saturation of pores when sufficiently high hydraulic water pressures were dominant.