Mapping Baltic Sea shallow water environments with airborne remote sensing

It is known that the structure of benthic macrophyte and invertebrate habitats indicate the quality of coastal water. Thus, a large-scale analysis of the spatial patterns of coastal marine habitats makes it possible to adequately estimate the status of valuable coastal marine habitats, provide better evidence for environmental changes, and describe the processes behind the changes. Knowing the spatial distribution of benthic habitats is also important from the coastal management point of view. Our previous results clearly demonstrated that remote sensing methods can be used to map water depth and distribution of taxonomic groups of benthic algae (e.g., red, green, and brown algae) in the optically complex coastal waters of the Baltic Sea. We have as well shown that benthic habitat mapping should be done at high spatial resolution owing to the small-scale heterogeneity of such habitats in Estonian coastal waters. Here we tested the capability of high spatial resolution hyperspectral airborne image in its application for mapping benthic habitats. A big challenge is to define appropriate mapping classes that are also meaningful from the ecological point of view. In this study two benthic habitat classification schemes??broader level and finer level??were defined for the study area. The broader level classes were relatively well classified, but discrimination among the units of the finer classification scheme posed a considerable challenge and required a careful approach. Benthic habitat classification provided the highest accuracy in the case of the Spectral Angle Mapper classification method applied to a radiometrically corrected image. Further processing levels, such as spatial filtering and glint correction, decreased the classification accuracy.     

Evidence of hyperpycnal flows at the head of the meandering Kaoping Canyon off SW Taiwan

Using seismic and Chirp sonar profiles, this paper tests the hypothesis that hyperpycnal flows are the main factor controlling the formation and maintenance of the meandering Kaoping submarine canyon off SW Taiwan. Cross-section geometries, and erosional as well as depositional features vary along the canyon course. In the proximal, sinuous part of the canyon, down-cutting into the shelf strata has created a relief of 340 m. The cause of this intense erosion of the seafloor is suggested to be the frequent development of hyperpycnal flows. A seismic section across a meander in the distal part of the canyon shows levees formed by overspilled sediments at the outer bend, and a terrace characterized by relatively flat stratified facies at the inner bend. The geological setting and climatic conditions in SW Taiwan (e.g. earthquakes, typhoons, floods), as well as major river–canyon connections (for example, direct input of highly concentrated suspended sediment) would all promote hyperpycnal flow generation. This causes axial incision, canyon wall slumping, and the formation of levees by spill-over deposition in the upper reach of the Kaoping Canyon.     

Sediment resuspension events induced by the wake wash of deep-draft vessels

Hydrodynamics and sediment resuspension events, induced at the shoreline by a deep-draft vessel passing nearby, are described. Measurements (pressure, currents and turbidity) were obtained at 4 Hz, on a lower beach ~50 m from a channel where large car ferries operate in Wootton Creek, Isle of Wight. The study focuses on a representative 8-min 32-s-long record, during which two large vessels passed the channel section. At the shore, the passage of each vessel induced a long-period water-level drawdown, followed by a water-level oscillation (seiche) of similar period, and the short-period waves of the wake. Both drawdowns were the main constituents of the prevailing wave pattern. The second drawdown was the largest in amplitude, in response to a higher speed of the ferry, and the influence of the seiche which had been activated during the preceding event. Two successive peaks of turbidity were observed shortly after this drawdown. Analyses of current velocity and direction indicate that the sediments resuspended originated from the shallower upper beach. Anthropogenically induced erosion of the foreshore is predicted at Wootton Creek.     

Microstructure observations in the upper layer of the South China Sea

A general pattern for turbulent mixing in the upper layer of the South China Sea (SCS) is presented based on TurboMAP measurements in April and May 2010. The turbulence level decreased significantly overall from north to south, and weakened from east to west in the northern SCS. The average dissipation rate north of 18°N reaches 1.69 × 10^?8 W/kg, approximately six times larger than that south of 18°N. The mean mixing efficiency in the SCS is 0.2, with a maximum of 0.31 near the Luzon Strait. At one repeatedly occupied station located in the central deep basin, the dissipation rate varies diurnally in the mixed layer and pycnocline due to diurnal heating and cooling by solar radiation and local barotropic tide, respectively.     

AMSR-E sea surface temperature (SST) charts enhancement

Microwave satellite images used for retrieving sea surface temperatures often have such distortions as noise and blurring of the thermal fronts. An image processing approach based on the Mumford-Shah model of optimal image approximation is considered for the solution to this problem. We divide images into flat areas and frontal zones, and then process these areas separately. Image fragmentation is based on automatic detection of the thermal front lines. SST enhancement in frontal zones is achieved by using image deconvolution methods. It has been shown that SST errors in high gradient areas reach 1–3 °C. The proposed approach can decrease this discrepancy.     

Crustal structure of the Southwest Subbasin,South China Sea,from wide-angle seismic tomography and seismic reflection imaging

The Southwest Subbasin (SWSB) is an abyssal subbasin in the South China Sea (SCS), with many debates on its neotectonic process and crustal structure. Using two-dimensional seismic tomography in the SWSB, we derived a detailed P-wave velocity model of the basin area and the northern margin. The entire profile is approximately 311-km-long and consists of twelve oceanic bottom seismometers (OBSs). The average thickness of the crust beneath the basin is 5.3 km, and the Moho interface is relatively flat (10–12 km). No high velocity bodies are observed, and only two thin high-velocity structures (~7.3 km/s) in the layer 3 are identified beneath the northern continent-ocean transition (COT) and the extinct spreading center. By analyzing the P-wave velocity model, we believe that the crust of the basin is a typical oceanic crust. Combined with the high resolution multi-channel seismic profile (MCS), we conclude that the profile shows asymmetric structural characteristics in the basin area. The continental margin also shows asymmetric crust between the north and south sides, which may be related to the large scale detachment fault that has developed in the southern margin. The magma supply decreased as the expansion of the SWSB from the east to the west.     

Temporal Variability of Total Ozone in the Asian Region Inferred from Ground-Based and Satellite Measurement Data

This paper reports investigation data on the temporal variability of total ozone content (TOC) in the Central Asian and Tibet Plateau mountain regions obtained by conventional methods, as well as by spectral, cross-wavelet, and composite analyses. The data of ground-based observation stations located at Huang He, Kunming, and Lake Issyk-Kul, along with the satellite data obtained at SBUV/SBUV2 (SBUV merged total and profile ozone data, Version 8.6) for 1980–2013 and OMI (Ozone Monitoring Instrument) and TOU (Total Ozone Unit) for 2009–2013 have been used. The average relative deviation from the SBUV/SBUV2 data is less than 1% in Kunming and Issyk-Kul for the period of 1980–2013, while the Huang He Station is characterized by an excess of the satellite data over the ground-based information at an average deviation of 2%. According to the Fourier analysis results, the distribution of amplitudes and the periods of TOC oscillations within a range of over 14 months is similar for all series analyzed. Meanwhile, according to the cross-wavelet and composite analyses results, the phase relationships between the series may considerably differ, especially in the periods of 5–7 years. The phase of quasi-decennial oscillations in the Kunming Station is close to the 11-year oscillations of the solar cycle, while in the Huang He and Issyk-Kul stations the TOC variations go ahead of the solar cycle.     

Distribution of <Emphasis Type="Italic">Nemopilema nomurai</Emphasis> in the southwestern Sea of Japan related to meandering of the Tsushima Warm Current

We investigated the horizontal distribution of Nemopilema nomurai medusae using a midwater trawl in the southwestern Sea of Japan from September to October of each year from 2006 to 2012. Numerous medusae of this species found in 2006, 2007, and 2009 were mainly distributed far (>40 km) from the mainland of Japan in the western part of the survey area, but were distributed in the stations closest (<25 km) to the mainland in the eastern part, particularly in 2006 and 2009. These distribution patterns were associated with the path of the second branch of the Tsushima Warm Current (TWC) that flows offshore to the west of Oki Islands and usually approaches the mainland of Japan to the east of Oki Islands. Differences in jellyfish distribution across the survey periods were related to the distribution of the second branch being associated with types, position and intensity of eddies in the eastern part of the survey area. Hence, the formations of eddies and consequent variation in the path of the TWC would be responsible for transporting medusae from offshore to near the mainland to the east of Oki Islands. Individuals with large bells accumulated in the northwestern part of the survey area, where a cyclonic eddy was present downstream of the third branch of the TWC. This variation in bell size distribution may be ascribed to differences in the physical and/or biological factors among the three branches of the TWC.     

Characterisation of Soot Emitted by Domestic Heating,Aircraft and Cars Using Diesel or Biodiesel

The characterisation of aggregates, like soot, firstly requires the determination of the size distribution of the primary particles. The primary particle size of combustion generated aggregates depends upon the combustion environment and the formation conditions, such as temperature, pressure and fuel-to-air ratio, among others. Since the combustion characteristics are different in the different types of burners, the characterisation of primary particles may offer the possibility to distinguish soot from different sources. In this paper, we present the signature of the primary particles and the aggregates of soot emitted by cars using diesel or biodiesel, by domestic heating, and by aircraft exhausts, which can be considered as the major sources as derived from measurements on transmission electron micrographs. The size distributions of all aggregates types with different aerodynamic diameter were log-normal and quasi-monodisperse. The size distribution of the primary particles for soot emitted by different sources showed minor differences. However, a comparison between the diameter of the primary particles and those obtained using a standard method for carbon black revealed discrepancies. The median diameter of the primary particles was combined with the median number of primary particles in an aggregate to calculate the relative particle surface area available for adsorption. In a similar way, the relative specific surface area was determined. The surface area was measured using the Brunauer-Emmett-Teller (B.E.T.) nitrogen adsorption method and the relative surface area available for adsorption was calculated.