Two orogenies in the Meatiq area of the Central Eastern Desert,Egypt

The Pan-African basement exposed in the Meatiq area west of Quseir, Egypt, consists of an infracrustal basement overthrusted by a supracrustal cover. The infracrustal rocks were developed as a result of an old orogeny referred to as the Meatiqian orogeny where granite—gneiss, migmatitic gneisses and migmatized amphibolites were formed. The granite—gneiss represents a deformed granite pluton emplaced at 626±2 Ma, whereas the migmatitic gneisses and amphibolites are of mixed igneous and sedimentary parentage. In view of the data so far available, the nature of the Meatiqian orogeny could not be deciphered. In spite of the young isotopic ages, it is suggested that at least the metasedimentary gneisses represent older rocks in the stratigraphic sequence of the infracrustal basement.The supracrustal cover represents a part of an extensive ophiolitic mélange obducted onto the infracrustal basement during the next orogeny (Abu Ziran orogeny) which culminated at 613±2 Ma. An active continental margin-type regime can adequately explain the evolution of such a supracrustal cover. During obduction, the ophiolitic mélange and the upper 2 km thick part of the infracrustal basement were intensely deformed and metamorphosed under PT conditions of the greenschist—epidote amphibolite facies. The deformed infracrustal basement was converted into mylonitic—blastomylonitic rocks and schists composing five thrust sheets, and subsequently intruded by synkinematic granitoid sheets. Later, both the infracrustal basement and the overlying supracrustal cover were isostatically uplifted, subjected to complex shallow folding giving rise to the major Meatiq domal structure, and were intruded by a postkinematic adamellite pluton at 579±6 Ma.     

Padé approximants for radiative transfer in inhomogeneous medium

The Padé approximants is used to estimate the albedo for an inhomogeneous semi-infinite medium. The single-scattering albedo is assumed to fall off exponentially with optical depth.     

Analyse multirésolution croisée de pluies et débits de sources karstiquesMultiresolution cross-analysis of rainfall rates and karstic spring runoffs

In order to quantify the quality of the rainfall/discharge relationship across time-scales, we propose the use of both orthogonal wavelet multiresolution analysis and cross-correlation analysis. By using the two techniques together, it is possible to show, scale-by-scale, the influence of the input to the system (rainfall) on the response (discharge) of the aquifer and also to relate these results to the internal structure of the aquifer and to the degree of organisation of the karst drainage. An application of this method to three Pyrenean karsts is also shown. To cite this article: D. Labat et al., C. R. Geoscience 334 (2002) 551–556.     

Variations of cosmic ray intensity in consequence of the semidiurnal anisotropy

The different types of cosmic ray intensity variations arising from the semidiurnal anisotropy are evaluated for different stations taking into consideration the effect of the Earth's axis inclination. Appropriate values of the parameters of the anisotropy together with accurate values of coupling and normalization constants are used in the calculations. The results predict the appearance of semiannual and diurnal waves as a consequence of a semidiurnal anisotropy. The form of the generated waves are found to be dependent on the characteristics of the station's asymptotic cone of acceptance as well as the season of detection. The characteristics of these waves together with that of the semidiurnal variation are discussed in detail.     

Beach erosion along the coastline of Alexandria, Egypt

ＢｅａｃｈｅｒｏｓｉｏｎａｌｏｎｇｔｈｅｃｏａｓｔｌｉｎｅｏｆＡｌｅｘａｎｄｒｉａ，Ｅｇｙｐｔ￥ＯｍｒａｎＥ．Ｆｒｉｈｙ，ＳａｍｉｒＭ．Ｎａｓｒ，ＫｈａｌｉｄＤｅｗｉｄａｒａｎｄＭｏｈａｍｅｄＥｌＲａｅｙ（ＲｅｃｅｉｖｅｄＪａｎｕａｒｙ２８，１９９３...     

Effects of shoreline and bedrock irregularities on the morphodynamics of the Alexandria coast littoral cell,Egypt

Beach-nearshore profiles combined with beach and surficial sediment samples were analyzed in conjunction with wave, current, littoral drift and sea-level data to determine the effect of bedrock on morphodynamic processes within the littoral zone of Alexandria on the Mediterranean coast of Egypt. This 14.5-km-long littoral cell is bounded by pronounced embayments and pocket beaches separated by headlands which prevent bypassing of beach sands, in effect making this cell a large, semi-closed basin. The compartmented nature of this cell acts together with the rough irregularity of the rocky seafloor to trap a thin veneer of sediment (<3 m thick), showing proportional mixing between two sedimentary provinces. A modern fine-grained sediment facies consisting of mixed carbonate/siliciclastic sand flanks most of the nearshore zone down to a depth of 8–10 m. Beyond this depth, considered to be the depth of closure, a relict late Pleistocene to mid-Holocene coarse-grained facies composed of biogenic carbonate sand is found. Along a short section of the coastline (km 3–6), the coarser sediment also occupies the nearshore zone. Over most of the study area the two sediment types are mixed in various proportions, largest mixing coinciding with poorest sorting. Profile analyses revealed seasonal changes in sediment volume along the coast which closely follow the cyclicity of seasonal changes in wave climate. The present shoreline orientation, headlands and rough, irregular rocky seabed are reflected in the erosion/accretion pattern, sediment characteristics, and the reversibility of longshore currents and littoral drift. Although there is a marked deficiency in the sediment balance, the sand budget for this cell, including artificial material (2.339*10⁶ m³) has increased slightly by 0.041*10⁶ m³ year^–1 as a result of engineering works carried out to widen the coastal road (Corniche). In addition to the physical properties of the bedrock (degree of induration), the accelerating sea-level rise during the Holocene and human influences, the modern morphology of the coast, the erosional seabed features in the nearshore zone, and the texture of seabed sediments are all controlled by the original geometry of the coast which consisted of an elevated subaerial ridge.     

Centrifuge modeling of seismic response of layered soft clay

Centrifuge modeling is a valuable tool used to study the response of geotechnical structures to infrequent or extreme events such as earthquakes. A series of centrifuge model tests was conducted at 80g using an electro-hydraulic earthquake simulator mounted on the C-CORE geotechnical centrifuge to study the dynamic response of soft soils and seismic soil–structure interaction (SSI). The acceleration records at different locations within the soil bed and at its surface along with the settlement records at the surface were used to analyze the soft soil seismic response. In addition, the records of acceleration at the surface of a foundation model partially embedded in the soil were used to investigate the seismic SSI. Centrifuge data was used to evaluate the variation of shear modulus and damping ratio with shear strain amplitude and confining pressure, and to assess their effects on site response. Site response analysis using the measured shear wave velocity, estimated modulus reduction and damping ratio as input parameters produced good agreement with the measured site response. A spectral analysis of the results showed that the stiffness of the soil deposits had a significant effect on the characteristics of the input motions and the overall behavior of the structure. The peak surface acceleration measured in the centrifuge was significantly amplified, especially for low amplitude base acceleration. The amplification of the earthquake shaking as well as the frequency of the response spectra decreased with increasing earthquake intensity. The results clearly demonstrate that the layering system has to be considered, and not just the average shear wave velocity, when evaluating the local site effects.     

The glauconite–Fe‐illite–Fe‐smectite problem: a critical review

Iron silicate minerals are a significant component of sedimentary systems but their modes of formation remain controversial. Our analysis of published data identifies end‐member compositions and mixtures and allows us to recognize controls of formation of different mineral species. The compositional fields of glaucony, Fe‐illite, Fe–Al smectites are determined in the M⁺/4Si vs. Fe/Sum of octahedral cations (M⁺ = interlayer charge). Solid solutions could exist between these phases. The Fe–Al and Fe‐rich clay minerals form two distinct solid solutions. The earliest phases to be formed are Fe–Al smectites or berthierine depending on the sedimentation rate. Reductive microsystems appear in the vicinity of organic debris in unconsolidated sediments. The Fe is incorporated first in pyrite and then in silicates after oxidation. Potassium ions diffuse from the sea‐water–sediment interface. If not interrupted, the diffusion process is active until reaction completion is reached, i.e. formation of Fe‐illite or glauconite or a mineral assemblage (berthierine–nontronite) according to the available Al ion amounts in the microsystem. Mixed‐layer minerals are formed when the diffusion process is interrupted because of sedimentation, compaction or cementation. Despite the common belief of their value as palaeoenvironment indicators, these minerals can form in a variety of environments and over a period of millions of years during sediment burial.