An ecosystem model with iron limitation of primary production in the equatorial Pacific at 140°W

We construct a one-dimensional ecosystem model (nitrate, ammonium, phytoplankton, zooplnakton and detritus) with simple physics and biology in order to focus on the structural relations and intrinsic properties of the food web that characterizes the biological regime in the central equatorial Pacific at 140°W. When possible, data collected during the EgPac and other cruises were used to calibrate model parameters for two simulations that differ in the limiting nutrient, i.e. nitrogen or iron. Both simulations show annual results in good agreement with the data, but phytoplankton biomass and primary production show a more pronounced annual variability when iron is used as the limiting nutrient. This more realistically reproduces the variability of biological production and illustrates the greater coupling between vertical physical processes and biological production when the limiting nutrient is iron rather than nitrogen. The iron simulation also illustrates how iron supply controls primary production variability, how grazingbalances primary production and controls phytoplankton biomass, and how both iron supply and grazingcontrol primary production. These results suggest that it is not possible to capture primary production variability in the central equatorial Pacific with biological models using nitrogen as the limiting nutrient. Other indirect results of this modeling study were: (1) partitioning of export production between dissolved and particulate matter is almost equal, suggesting that the importance of DOC export may have been previously overestimated; (2) lateral export of live biomass has to be taken into account in order to balance the nitrogen budget on the equator at 140°W; and (3) preferential uptake of ammonium (i.e. nitrate uptake inhibition by ammonium) associated with high regeneration of nitrogen (low f ratio as a consequence of the food web structure imposed by iron limitation) largely accounts for the surface build-up of upwelled nitrate.     

Morphodynamics of a bar-trough surf zone

A field study was made of the distinguishing morphodynamic processes operating in a surf zone which perennially exhibits accentuated bar-trough topography (the “longshore-bar-trough” and “rhytmic-bar-and-beach” states as described by Wright and Short, 1984). Characteristic features of the morphology include a shallow bar with a steep shoreward face, a deep trough, and a steep beach face. This morphology, which is favored by moderate breaker heights and small tidal ranges, strongly controls the coupled suite of hydrodynamic processes. In contrast to fully dissipative surf zones, the bar-trough surf zone is not at all saturated and oscillations at incident wave frequency remain dominant from the break point to the subaerial beach. The degree of incident wave groupiness does not change appreciably across the surf zone. Infragravity standing waves which, in dissipative surf zones, dominate the inshore energy, remain energetically secondary and occur at higher frequencies in the bar trough surf zone. Analyses of the field data combined with numerical simulations of leaky mode and edge wave nodal—antinodal positions over observed surf-zone profiles, indicate that the frequencies which prevail are favored by the resonant condition of antinodes over the bar and nodes in the trough. Standing waves which would have nodes over the bar are suppressed. Sediment resuspension in the surf zone appears to be largely attributable to the incident waves which are the main source of bed shear stress. In addition, the extra near-bottom eddy viscosity provided by the reformed, non-breaking waves traversing the trough significantly affects the vertical velocity profile of the longshore current. Whereas the bar is highly mobile in terms of onshore—offshore migration rates, the beach face and inner regions of the trough are remarkably stable over time.     

HYCAT: Hybrid hydrofoil catamaran concept

A hybrid marine vehicle concept has been developed which utilizes a combination of static and dynamic support. This concept, termed HYCAT² for HYdrofoil CATamaran, combines a planing catamaran hull with two fully submerged hydrofoils mounted in tandem fore and aft. The hullform is developed by adding a high length/beam ratio, high deadrise sidehull along the keel of each catamaran demihull. The sidehull, which is the only portion immersed when operating foilborne, provides buoyancy support. Spray strips provide discontinuities which separate the flow and provide dynamic lift in addition to the hydrofoils. Stability in the heave, pitch and roll degrees of freedom is achieved through the displacement dependent sidehull buoyancy and the rate and displacement dependent lift developed by the spray strips and hydrofoils. A comprehensive series of model tests has been conducted to characterize the smooth and rough water performance.     

Sound velocity,density, and related properties along a transect across the Bay of Bengal

Physical properties, sound velocity and density of 95 core samples from ten locations along a transect (parallel to 15°N latitude) across the Bay of Bengal were measured. Results indicate that sound velocities range from 1,482 to 1,679 m/s (av: 1,583 m/s) and densities from 1,338 to 1,757 kg/m³ (av: 1,527 kg/m³). It has been observed that dark colored clays and sandy clays show higher values of sound velocity and density than the average values. A comparative study of the same with that of the sediment cores collected from the Norwegian basin, Mediterranean Sea, and Hatteras, Nares Abyssal plains, western North Atlantic Ocean was done.     

The behaviour of a Cu(II) ion selective electrode in seawater; copper consumption capacity and copper determinations

Determinations of copper consumption capacity (CuCs.C) and labile copper concentrations in surface coastal seawater, using a copper ion selective electrode (Cu-ISE) potentiometric method under predominantly diffusive conditions, are reported. For evaluation of the copper concentrations, the points of the endpoint contiguity zone of the CuCs.C titration curve were treated by an ISE multiple standard addition technique. The results were compared with those obtained by means of a Chelex-100 (calcic form) ‘batch’ procedure-potentiometric stripping analysis.The labile copper of the sample was determined at concentrations down to 10.70 nM with an average RSD of 12%, independent of the Cu-ISE employed. For adjacent subsamples, the mean CuCs.C values obtained for El Way seawater were equivalent to 81.05 and 48.00 nM copper, with an RSD of 4 and 7%, and for Isla Santa Maria seawater the value was equivalent to 70.27 nM copper, with an RSD of 7%. The theoretical approach of the electrode diffusive mechanism proposed, which would depend, fundamentally, on the adsorptive, complexing and reducing properties of the dissolved organic matter in the seawater sample, allows simultaneous analytical determination of CuCs.C and labile copper concentration in seawater.     

Study of the mutual influence of the El Niño-Southern Oscillation processes and the North Atlantic and Arctic Oscillations

On the basis of the nonlinear techniques for the estimation of coupling between oscillatory systems from time series, we investigate the dynamics of climatic modes characterizing global and Northern Hemisphere (NH) processes. The North Atlantic Oscillation (NAO) and Arctic Oscillation indices and the El Niño-Southern Oscillation (ENSO) indices are analyzed in terms of the most reliable data from 1950 through 2004 and earlier data since the 19th century. These indices characterize changes in NH atmospheric pressure (specifically, sea-level pressure in the North Atlantic and NH extratropical latitudes as a whole) and in equatorial Pacific sea-surface temperature and sea-level pressure to which the strongest variations of global surface temperature and global climate on interannual time scales and of regional climatic anomalies in the NH are linked. The methods used are based on phase-dynamics modeling and nonlinear prediction models (a nonlinear version of Granger causality). From both methods and various ENSO indices, the inference about the ENSO effect on the NAO during the latter half of the 20th century and in the early 21st century is made with confidence probability of at least 0.95. The influence is characterized by a time delay of about two years. No inverse influence is found with a similar degree of reliability. Results of estimating the coupling between the ENSO and the NAO depend on the type of index that is used to describe the NAO. The ENSO effect on the NAO is detected with sufficient confidence when the NAO index is chosen to be a larger scale characteristic. However, when a more local index of the NAO is used, no statistically significant coupling to the ENSO is found. Increasing the length of the analyzed ENSO and NAO series (over more than 100 yr) does not lead to any more reliable detection of coupling. Analysis of the data for different time intervals during 1950–2004 has revealed a strengthening of the ENSO effect on the NAO, although this inference is not reliable.     

Distribution of As, Cr and V species in the Po-Adriatic mixing area, (Italy)

The distribution of dissolved and participate concentrations of As, Cr and V was investigated in the mixing area of the Po river in five surveys over the period March 1992-March 1995. The data obtained indicate noticeable contamination of coastal waters of the northern Adriatic with Cr but not As or V. Total dissolved concentrations for As and V were comparable with oceanic levels but were higher by a factor of 4 for Cr. These results suggest either low anthropogenic inputs of As and V, from terrigenous and atmospheric sources, or efficient removal mechanisms. The investigated metals had low reactivity during freshwater-seawater mixing and the distribution of concentrations in the dissolved and solid phases suggests that the dilution process is the main factor controlling the transport of these metals to the sea in low-to-medium solid transport conditions. Further investigations are required to elucidate the behavior of these metals during high solid transport conditions. Significant changes in the speciation of As occurred during the transition between the two end-member matrices. In the coastal waters of the northern Adriatic, the arsenite fraction in winter, and the arsenite and dimethylarsinate fractions in summer increased with respect to riverine waters. Changes in the speciation of chromium were minor, but also showed a small increase in reduced species in marine waters.     

Environmental overview of Eckernförde Bay,northern Germany

This environmental overview of Eckernförde Bay (northern Germany) summarizes the results of previous studies relevant to the Office of Naval Research's Coastal Benthic Boundary Layer (CBBL) Baltic field exercise conducted during 1993–1994. Significant environmental characteristics include the following: (1) surface sediment distribution is related to water depth, dictated primarily by hydrodynamic reworking of older glacial deposits; (2) the origin and characteristics of small-scale sedimentary structures depend on storm-generated waves and currents; (3) the proximity of the sea surface and sediment —water interface results in a pelagic—benthic coupling that drives biogeochemical processes and produces organicrich, acoustically turbid sediments; and (4) the bay floor is complicated topographically by pockmarks and manmade sedimentary structures.     

Three-dimensional visualization of mission planning and control forthe NPS autonomous underwater vehicle

The Naval Postgraduate School (NPS) is constructing a small autonomous underwater vehicle (AUV) with an onboard mission control computer. The mission controller software for this vehicle is a knowledge-based artificial intelligence (AI) system requiring thorough analysis and testing before the AUV is operational. The manner in which rapid prototyping of this software has been demonstrated by developing a controller code on a LISP machine and using an Ethernet link with a graphics workstation to simulate the controller's environment is discussed. The development of a testing simulator using a knowledge engineering environment (KEE) expert system shell that examines AUV controller subsystems and vehicle models before integrating them with the full AUV for its test environment missions is discussed. This AUV simulator utilizes an interactive mission planning control console and is fully autonomous once initial parameters are selected