Deterring effects of 8-45 kHz tone pulses on harbour seals (Phoca vitulina) in a large pool

The marine aquaculture industry suffers losses due to pinniped attacks which damage net enclosures and fish stocks. Acoustic harassment devices (AHDs) emit loud sounds which are intended to deter pinnipeds from approaching aquaculture enclosures. At present, many AHDs emit sounds in the 8-20 kHz frequency range. It is not known whether sounds of higher frequencies have a deterrent effect on seals. Therefore five captive harbour seals (Phoca vitulina) were subjected to four series of tone pulses together spanning a broad frequency range (8, 16, 32 and 45 kHz). Pulse duration was 250 ms and pulse interval was 5s. Each of the four sounds was made deterrent by increasing the amplitude. The seals reacted by swimming away from the sounds. The displacement effect of each sound was judged by comparing the animals' surface positions, and number of surfacings, during ten 45 min baseline periods with ten 45 min test periods per frequency (one frequency per day in rotation, 40 sessions in total). The seals were displaced by all four frequencies throughout the 40 trial days. The seals came to the surface more often when the test tones were produced than in the baseline periods. The initial displacement distances did not change over the 40 test days. This suggests that operating AHDs for only short periods will be more effective and less likely to result in habituation by the seals than operating them continuously. The discomfort threshold sound pressure level (SPL) was established for each of the four pulse frequencies. The acoustic discomfort threshold SPL is defined as the boundary SPL between the area that the animals generally occupied during the transmission of the sounds and the area that they generally did not enter during sound transmission. The discomfort threshold SPL may depend on the context.     

The nature of scour development and scour protection at offshore windfarm foundations

Analysis and interpretation of monitoring data for the seabed bathymetry local to offshore windfarm foundations has shown how the scour develops in time and highlighted variations between sites with different seabed sediment characteristics, i.e. sands and clays. Results from European offshore windfarms have generated a unique dataset for comparison with previously published data. Where surficial sediment is underlain by a marine clay the scour (to date) has been limited, whilst those with unconstrained depths of sandy sediments show scour as deep as 1.38 times the monopile diameter. Scour protection has been installed at some sites for structural stability of the foundation or for cable protection. The flow interaction with the protection causes edge scour or secondary scour in the seabed around the protection. In some cases this scour is deeper than the unprotected case. The analysis has resulted in an improved evidence base for scour in the marine environment.     

Are Models Too Simple? Arguments for Increased Parameterization

The idea that models should be as simple as possible is often accepted without question. However, too much simplification and parsimony may degrade a model's utility. Models are often constructed to make predictions; yet, they are commonly parameterized with a focus on calibration, regardless of whether (1) the calibration data can constrain simulated predictions or (2) the number and type of calibration parameters are commensurate with the hydraulic property details on which key predictions may depend. Parameterization estimated through the calibration process is commonly limited by the necessity that the number of calibration parameters be smaller than the number of observations. This limitation largely stems from historical restrictions in calibration and computing capability; we argue here that better methods and computing capabilities are now available and should become more widely used. To make this case, two approaches to model calibration are contrasted: (1) a traditional approach based on a small number of homogeneous parameter zones defined by the modeler a priori and (2) regularized inversion, which includes many more parameters than the traditional approach. We discuss some advantages of regularized inversion, focusing on the increased insight that can be gained from calibration data. We present these issues using reasoning that we believe has a common sense appeal to modelers; knowledge of mathematics is not required to follow our arguments. We present equations in an Appendix, however, to illustrate the fundamental differences between traditional model calibration and a regularized inversion approach.     

The use of chemical dispersants to combat oil spills at sea: A review of practice and research needs in Europe

In order to better understand the practice of dispersant use, a review has been undertaken of marine oil spills over a 10 year period (1995-2005), looking in particular at variations between different regions and oil-types. This viewpoint presents and analyses the review data and examines a range of dispersant use policies. The paper also discusses the need for a reasoned approach to dispersant use and introduces past cases and studies to highlight lessons learned over the past ten years, focussing on dispersant effectiveness and monitoring; toxicity and environmental effects; the use of dispersants in low salinity waters; response planning and future research needs.     

Significant variations in the productivity of green macroalgae in a mesotidal estuary: implications to the nutrient loading of the system and the adjacent coastal area

A spatially dynamic model for the productivity of spores and adults of green macroalgae (Enteromorpha sp.) was developed for a mesotidal estuary (Mondego estuary, Portugal). Many of the algal processes and parameters included in the model were experimentally obtained. Model predictions were compared to a real time series (1993-1997) of macroalgal biomass variation and the two sets show a good agreement (ANOVA, P<0.001). Results suggest that algal growth is highly sensitive to small changes in depth and exhibits different patterns of variation in different seasons. On a yearly basis, global calculations for the south channel of the estuary (137 ha) suggest that during bloom years, macroalgal biomass may reach about 21,205 ton DW compared to 240 ton DW in regular years. On a seasonal basis, the difference may be even more significant. The consequences of such variations on the nitrogen and phosphorus loading of the system and the adjacent coastal area are discussed.     

对柿竹园矽卡岩成因及其成矿作用的新认识

本文将报导柿竹园Ｗ，Ｓｎ，Ｍｏ，Ｂｉ矿床中矽卡岩矿物－石榴子石和辉石成分和石榴子石中熔融包裹体研究结果，对不同中段的１６块矽卡岩样品（９４％的标本采自第Ⅲ矿带）中的石榴子石和辉石进行了电子探针分析，共获得２３０个测点的数据，此外，还对上述中段大部分样品里的石榴子石和辉石进行了从边部到核心成分测定，共获得１３个样品的９７个测点数据，研究结果表明，绝大多数石榴子石属于含Ａｌｍ＋Ｓｐｓ＋Ｐｙｒ〈１３％（