Are response function representations of the global carbon cycle ever interpretable?

Response function models are often used to represent the behaviour of complex, high order global carbon cycle (GCC) and climate models in applications which require short model run times. Although apparently black-box, these response function models need not necessarily be entirely opaque, but instead may also convey useful insights into the properties of the parent model or process. By exploiting a transfer function (TF) framework to analyse the Lenton GCC model, this paper attempts to demonstrate that response function representations of GCC models can sometimes also provide structural information on the parent model from which they are identified and calibrated. We take a fifth-order TF identified from the impulse response of the Lenton model atmospheric burden, and decompose this to show how it can be re-expresses in a generic five-box form in sympathy with the structure of the parent model.     

A MODELLING RECONSTRUCTION OF THE LAST GLACIAL MAXIMUM ICE SHEET AND ITS DEGLACIATION IN THE VICINITY OF THE NORTHERN PATAGONIAN ICEFIELD, SOUTH AMERICA

ABSTRACT. A time-dependent model is used to investigate the interaction between climate, extent and fluctuations of Patagonian ice sheet between 45° and 48°S during the last glacial maximum (LGM) and its subsequent deglaciation. The model is applied at 2 km resolution and enables ice thickness, lithospheric response and ice deformation and sliding to interact freely and is perturbed from present day by relative changes in sea level and equilibrium line altitude (ELA). Experiments implemented to identify an LGM configuration compatible with the available empirical record, indicate that a stepped ELA lowering of 750 to 950 m is required over 15000 years to bracket the Fenix I-V suite of moraines at Lago Buenos Aires. However, 900 m of ELA lowering yields an ice sheet which best matches the Fenix V moraine (c. 23000 a BP) and Caldenius' reconstructed LGM limit for the entire modelled area. This optimum LGM experiment yields a highly dynamic, low aspect ice sheet, with a mean ice thickness of c. 1130 m drained by numerous large ice streams to the western, seaward margin and two large, fast-flowing outlet lobes to the east. Forcing this scenario into deglaciation using a re-scaled Vostok ice core record results in an ice sheet that slowly shrinks by 25% to c. 14500 a bp , after which it experiences a rapid collapse, loosing some 85% of its volume in c. 800 years. Its margins stabilize during the Antarctic Cold Reversal after which it shrinks to near present-day limits by 11 000 a bp .     

Facies descriptions and associations in ancient reworked (?transgressive) shelf sandstones: Cambrian and Cretaceous examples

Preferred facies trends in ancient shallow-marine sediments have been determined by Markov-chain and substitutability analyses of detailed sections measured in Lower Cambrian outcrops in the Southern Canadian Rocky Mountains (St Piran Formation, 600 m of vertical section; Fort Mountain Formation, 500 m of vertical section), and in a Cretaceous subsurface reservoir in south-central Alberta (Viking Formation in the Garrington Field: 69 cores). Those sections with more defined cycles are interpreted to result from progradation of shelf-ridge sands and gravels; examples with less defined order originated as inter-ridge deposits, in zones with complex palaeoflows and in areas of subdued palaeotopographic relief. The highest degree of facies organization (> 80% significant facies transitions) occurs in the Cretaceous Viking Formation sandstone and conglomerate ridges, interpreted to have had abundant sediment supply, water depths between fair- and storm-weather wave-base, and a strong littoral current system. A moderate degree of facies organization (70% significant facies transitions) occurs in the inter-ridge deposits of the Cambrian Fort Mountain Formation, interpreted to have had a variable sediment supply, water depths above storm-weather wavebase, and a variable, oscillating tidal current system. A poor degree of facies organization (< 45% significant facies transitions) occur in the ridge deposits of the Cambrian Fort Mountain and St Piran formations and in the inter-ridge deposits of the Cambrian St Piran and Cretaceous Viking formations. This facies disorganization occurs in sites where there was continuous and rapid subsidence (Cambrian) or in areas of subdued seafloor relief with complex current systems (Cretaceous). The pattern of facies relationships also varies. Relatively short linear patterns occur in all of the shelf-ridge deposits. This contrasts with the inter-ridge deposits in which there are long linear patterns or complex ring structures, interpreted to result from complex palaeoflow patterns in areas of subdued seafloor topography. Various statistical techniques (including Markov-chain and substitutability analyses) can aid the interpretation of very complex lithological successions, as shown by the shelf sandstones and conglomerates examined in this study.     

A scale of dissolution for quartz and its implications for diagenetic processes in sandstones

During diagenesis quartz grains undergo selective dissolution, controlled in location by the surface energy characteristics of the individual grains. Experimental etching in HF of isolated quartz grains reproduces comparable textures to those of natural occurrences. Some experimental results illustrate the specific effects of surface textures on their initial dissolution rates, so demonstrating the control surface energy variation has over dissolution. A hierarchy of grain surface characteristics, according to surface energies, provides a useful guide to the relative rates of dissolution during decomposition.     

An electromagnetic device for automatic detection of bedload motion and its field applications

A new sensor for the continuous and unmanned detection and recording of bedload motion is described. The sensor acts in the same fashion as a conventional metal detector but is elongate and installed permanently in the bed of an alluvial channel. Artificial clasts are labelled with short lengths of ferrite rod and are seeded upstream from the sensor, replacing bed particles. The entrainment of seeded clasts takes them over the sensor where they distort the magnetic field and produce a change in inductance that is detected and recorded. A field installation demonstrates the value of the sensor by revealing for the first time in coarse-grained alluvium the spasmodic nature of particle motion reminiscent of kinematic waves. It also illustrates the importance of pebble clusters in delaying particle entrainment.     

Thin section and S.E.M. textural criteria for the recognition of cement-dissolution porosity in sandstones

Cement-porosity relationships are described from the Lower Triassic Sherwood Sandstone Group and the Middle Jurassic Ravenscar Group in the United Kingdom. Calcite cemented sandstones display a variety of replacement textures, with preferential replacement of grains and of overgrowth faces with high free-surface energy. Dolomite and siderite cemented sandstones display similar textures but replacement is less specific and euhedral overgrowth surfaces are commonly embayed by carbonates. Examination of the more porous sandstones with the scanning electron microscope reveals a range of pitting and embayment textures in authigenic overgrowths and in detrital grains. These range from small ‘v’-shaped notches and pits, through regular and irregular shaped embayments, into large depressions. These textures appear to be morphologically similar to the quartz surfaces seen in thin sections of carbonate cemented sandstones, and are interpreted to have been formed by the dissolution of pore-filling and grain replacive authigenic carbonates. This is confirmed by examination of experimentally exhumed overgrowth surfaces from carbonate cemented sandstones. These textures indicate that part of the intergranular porosity in these sediments is secondary in origin, and has been generated by the dissolution of carbonate cements. The identification of such textures may lead to a more confident interpretation of the nature of intergranular porosity in the subsurface.     

Architectural analysis of a volcaniclastic jökulhlaup deposit, southern Iceland: sedimentary evidence for supercritical flow

The 1918 eruption of the glacially capped Katla volcano, southern Iceland, generated a violent jökulhlaup, or glacial outburst flood, inundating a large area of Mýrdalssandur, the proglacial outwash plain, where it deposited ca 1 km³ of volcaniclastic sediment. The character of the 1918 jökulhlaup is contentious, having been variously categorized as a turbulent water flow, a hyperconcentrated flow or as a debris flow, based on localized outcrop analysis. In this study, outcrop‐based architectural analyses of the 1918 deposits reveal the presence of lenticular and tabular bedsets associated with deposition from quasi‐stationary antidunes and down‐current migrating antidunes, and from regular based bedsets, associated with transient chute‐and‐pool bedforms, all of which are associated with turbulent, transcritical to supercritical water flow conditions. Antidune wavelengths range from 24 to 96 m, corresponding to flow velocities of 6 to 12 m sec^?1 and average flow depths of 5 to 19 m. This range of calculated flow velocities is in good agreement with estimates made from eyewitness accounts. Architectural analysis of the 1918 jökulhlaup deposits has led to an improved estimation of flow parameters and flow hydraulics associated with the 1918 jökulhlaup that could not have been achieved through localized outcrop analysis. The observations presented here provide additional sedimentological and architectural criteria for the recognition of deposits associated with transcritical and supercritical water flow conditions. The physical scale of sedimentary architectures associated with the migration of bedforms is largely dependent on the magnitude of the formative flow events or processes; sedimentary analyses must therefore be undertaken at the appropriate physical scale if reliable interpretations, regarding modes of deposition and formative flow hydraulics, are to be made.     

Kilometre‐scale sand injectites in the intracratonic Murzuq Basin (South‐west Libya): an igneous trigger?

Mount Telout, situated at the edge of the Murzuq Basin, is a 325 m high conical hill within a circular collapse structure that records 0·5 km³ of sand intrusion into Silurian shales. Based on a comparison with other similar circular collapse structures around the Murzuq Basin, it is argued that sand injection in the form of pipes occurred during the Devonian. The overpressures triggering the process are inferred to result from a combination of: (i) tectonic uplift at a basin scale that initially focused regional ground water flows; and (ii) igneous intrusion within the sand‐rich Cambrian–Ordovician strata. The palaeorelief buried under the regionally extensive Silurian shales may have locally focused overpressures and localized sand injection at the 1 to 10 km scale. The Mount Telout injected sandbody and related features offer exceptional, seismic‐scale outcrop analogues for sand injections that are often identified in seismic reflection data. Large‐scale sand injections might be essential in petroleum exploration of the North African Lower Palaeozoic basins as they form seal‐bypass systems.