Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.     

伊宁地块早石炭世球泡流纹岩的发现及地球化学特征

伊宁地块西段中部阿腾套山一带发现的球泡流纹岩,多数产于早石炭世海相无球泡流纹岩夹层中,整体呈层状、互层状,球泡通气孔顺层平行于流纹构造定向分布,推断是海相极浅水环境下的产物,因而具有精细指相意义。该球泡流纹岩与同期A型花岗岩类共生,属碱性岩类,SiO_2含量为69.18%~77.69%,K_2O大于4%,Al_2O_3为11.32%~16.24%,Ga/Al×10~4=2.1~7.8,∑REE=85.22×10~(-6)~348.8×10~(-6),(La/Yb)_N=6.7~14.8,相对富集轻稀土,δEu具明显负异常,稀土配分及大离子元素蛛网图均与A型花岗岩类地球化学特征总体相同。ε_(Hf)(t)均大于0(+12.5~+15.5),两阶段锆石Hf模式年龄大于锆石U-Pb年龄,表明源区可能为早古生代新生地壳物质部分熔融演化而来。A型球泡流纹岩与同期A型花岗岩类均形成于拉张构造环境,是区内早石炭世大哈拉军山组中迄今唯一发现的显示拉张构造环境的珍贵实例。为揭示和探讨伊宁地块总体处于汇聚大背景下的局部拉张环境,以及东窄西宽之楔形构造形态提供了可能。     

孔隙性砂岩中单条变形带与簇状变形带的特征与区别——以远安地堑上白垩统红花套组中变形带为例

孔隙性砂岩中的变形带研究近年来取得长足进展,但有关单条变形带与簇状变形带如何区分和界定仍是一个较模糊的问题。本文以远安地堑上白垩统红花套组高孔砂岩中发育的剪切增强压实带和压实剪切带为例,对单条及簇状变形带的特征和区别做出系统分析。研究表明,虽然单条变形带的长度、宽度、错断位移、凸起高度等均明显小于簇状变形带,但是不同运动学成因的变形带宏观特征、微观结构不同,因此不能单纯以规模大小区分二者,需要结合带密度将簇状变形带与变形带列、网格构造等相区分,还需要结合其微观结构特征进行准确鉴定。单条及簇状剪切增强压实带特征类似,均不具核心碎裂带,颗粒主要为中等破碎,多表现为多个不连续分布的碎裂核。簇状剪切增强压实带内部的非均质性更强。单条压实剪切带具有核心碎裂带,依剪切力大小不同,其核心碎裂带内颗粒粉碎程度及边缘过渡带宽度不同,常伴随微小剪切缝痕迹。簇状压实剪切带在镜下可清晰识别出不同的核心碎裂带、带间区域及微小剪切缝,可见S—C组构和断续分布的滑动面。单条及簇状变形带的发育会不同程度地改变储层的物性并可能会对油气运移和开采产生影响。     

南秦岭柞水—山阳矿集区金铜矿床成矿规律与找矿方向

南秦岭柞水—山阳矿集区地质构造和岩浆活动强烈,矿床(点)成群成带分布,成矿条件良好。在长期找矿实践、成矿地质背景分析和典型矿床解剖的基础上,综合研究认为,区内金矿主要受EW向断裂或EW向韧-脆性剪切带与NE向张扭性叠加构造控制,寒武系水沟口组、泥盆系星红铺组与大枫沟组是金的赋矿地层。金矿体呈近EW向大致等间距展布,单个矿体在延伸方向呈透镜状、哑铃状、囊状等,具尖灭再现特征,构造叠加部位矿体厚大、品位较高。区内金矿床类型多为中-低温热液型、远成低温热液型,成矿时代为印支—燕山期。夏家店等已知金矿床深部及外围、区域断裂旁侧次级近EW向与NNE向断裂交汇部位、构造转折端、构造虚脱部位等是寻找金矿的有利靶区。铜矿分布于山阳—凤镇大断裂两侧,成矿类型以斑岩型-矽卡岩型为主,构造热液改造型、隐爆角砾岩型次之。斑岩型-矽卡岩型铜(钼)矿受燕山期构造-岩浆活动控制,赋存于燕山期斑岩体与围岩接触带内;矿体产状多受岩体与围岩接触面控制,呈似层状、透镜状产出。燕山期中酸性小岩体及其与围岩的接触部位、东西向三级断裂带附近是寻找铜(钼)矿的首选靶区。本次研究建立了柞水—山阳矿集区金铜矿床区域成矿模式,总结了找矿标志,通过成矿规律、成矿作用及物探、化探、遥感异常特征系统分析,认为区内找矿潜力巨大,并提出了3片金铜(钼)成矿远景区,指出下一步的找矿方向。     

北京市房山区霞云岭"7·20"坡面泥石流特点及形成因素浅析

坡面泥石流是北京市泥石流灾害的主要类型,据不完全统计,2004—2020年,共发生坡面泥石流11起,占已发生泥石流灾害总数的31.43％,严重影响人民的生命财产安全.房山区霞云岭乡是坡面泥石流集中发生的区域,发生坡面泥石流7起,占北京市已发生的坡面泥石流的63.64％.以"7·20"典型坡面泥石流为例,初步分析了坡面泥石流的特点及激发雨量.分析认为北京市坡面泥石流发生在坡面陡长且松散堆积物厚度较大的坡体,具有规模小、暴发快、破坏力强、群发性高、隐蔽性高等特点.坡面泥石流均由暴雨激发,激发雨量为大暴雨或以上级别.     

基于Web的地图符号设计与实现

地图符号化是当前数字地图研究的重要内容之一。着重论述了Web环境下地图符号的构成特征、地图符号的组织及符号配置,以及符号库的基本传输方法,最后给出具体实例,说明了该实践的有效性与可行性。     

基于A*算法的路网数据组织

路网的数据组织是路径规划算法设计的基础。采用C++标准模板库实现基于A*算法的路网数据组织,着重从路网的拓扑结构、空间索引、A*算法数据结构、分层和分网格组织几方面来讨论。最后给出实例证明其有效性。     

城市与工程测量EDM导线技术标准的分析

基于导线测量误差理论与电磁测距(EDM)导线的特性,分析讨论了城市与工程测量EDM导线的各项技术参数,提出了各级EDM导线技术标准的建议,通过计算验证所给出的这些技术指标是合理可靠的。     

温差能驱动的水下滑翔器设计与实验研究

论文设计开发了一种新型的温差能驱动的水下滑翔器,并对它做了水域实验研究。文章讨论了温差能驱动的滑翔器运动机理及其在垂直剖面的运动分析,得到稳态运动的参数解。结合能够把水域温差能转变为机械能的热机设计以及滑翔器的主要机械结构和控制硬件系统设计,完成了滑翔器的初步设计与开发。滑翔器在千岛湖进行了水域实验,实验结果表明,此水下滑翔器完全能够利用温差能实现预定的滑翔运动。