Estrogenic Activity and Volume Fraction of Waste Water Origin in Monitoring Wells Along the Santa Cruz River, Arizona

The fate of estrogenic activity in waste water effluent was examined during surface transport and incidental recharge along the Santa Cruz River in Pima County, Arizona. Based on measurement of boron isotopes, the fractional contribution of reclaimed water in surface waters and ground water wells proximate to the river was determined for a contemporary sample set. Estrogenic activity decreased by −60% over the 25 mi length of the river below effluent discharge points in Tucson. In ground water samples obtained from monitoring wells that are proximate to the Santa Cruz River, both dissolved organic carbon ( p = 0.0003) and estrogenic activity ( p = 3 × 10⁻⁶) were highly correlated to fractional waste water content. Results indicate that proximate ground water quality is sensitive to incidental recharge of reclaimed water in the Santa Cruz River bed. In a few locations, little attenuation of estrogenic activity was apparent during percolation of effluent in the river channel to well withdrawal points.     

Fungal infection of Eudiaptomus gracilis (Copepoda, crustacea) in Lake Mondsee

An Aphanomyces sp. (Oomycetes) was found to be an important egg parasite of Eudiaptomus gracilis (Copepoda) in Lake Mondsee (Austria). The infection is evidenced by densely packed infection hyphae, attached with holdfasts and wrapped around the female's abdomen. The infection hyphae give rise to hyphae which penetrate the egg sac, and subsequently kill all eggs. The infection obviously has no pathogenetic effects on the egg-carrying female. Infected females appear during summer and fall, mainly in warm water layers. Infected egg clutches are found at all seasons of the year, indicating considerable birth control of the Eudiaptomus population by parasite infection. It seems possible that the actual Aphanomyces sp. is not the only parasite involved.     

Evolution and degradation of flat‐top mesas in the hyper‐arid Negev,Israel revealed from 10Be cosmogenic nuclides

Mesas are ubiquitous landforms in arid and semiarid regions and are often characterized by horizontal stratified erodible rocks capped by more resistant strata. The accepted conceptual model for mesa evolution and degradation considers reduction in the width of the mesa flat‐top plateau due to cliff retreat but ignores possible denudation of the mesa flat‐top and the rates and mechanism of erosion. In this study we examine mesas in the northeastern hyperarid Negev Desert where they appear in various sizes and morphologies and represent different stages of mesa evolution. The variety of mesas within a single climatic zone allows examination of the process of mesa evolution through time. Two of the four sites examined are characterized by a relatively wide (200–230 m) flat‐top and a thick caprock whereas the other two are characterized by a much narrower remnant flat‐top (several meters) and thinner caprock. We use the concentration of the cosmogenic nuclide ¹⁰Be for: (a) determining the chronology of the various geomorphic features associated with the mesa; and (b) understanding geomorphic processes forming the mesa. The ¹⁰Be data, combined with field observations, suggest a correlation between the width of flat‐top mesa and the denudation and cliff retreat rates. Our results demonstrate that: (a) cliff retreat rates decrease with decreasing width of the flat‐top mesa; (b) vertical denudation rates increase with decreasing width of the flat‐top mesa below a critical value (~60 m, for the Negev Desert); (c) the reduction in the width of the flat‐top mesa is driven mainly by cliff retreat accompanied by extremely slow vertical denudation rate which can persist for a very long time (>10⁶ Ma); and (d) when the width of the mesa decreases below a certain threshold, its rate of denudation increases dramatically and mesa degradation is completed in a short time. Copyright © 2014 John Wiley & Sons, Ltd.     

Steel MIST and UKSP together at Sheffield

The annual UK Solar Physics meeting this year joined a MIST meeting for the first time. The two drew together the considerable UK solar and solar–terrestrial physics community for discussion and debate at the University of Sheffield from 9–12 April 2002. Neil Arnold and Graham Bailey (MIST) and Robert Erdélyi (UKSP) report on this innovative joint meeting.     

Observations of the Temperature and Humidity Structure Parameter Over Heterogeneous Terrain by Airborne Measurements During the LITFASS-2003 Campaign

We used numerical simulations to investigate the general relationship between urban morphology and the intensity of wind gusts in built-up areas at the pedestrian level. The simulated urban boundary layer developed over a 19.2 km (length) \(\times \) 4.8 km (width) \(\times \) 1.0 km (height) simulation domain, with 2-m resolution in all directions, to explicitly resolve the detailed shapes of buildings and the flow at the pedestrian level. This complex computation was accomplished using the lattice Boltzmann method and by implementing a large-eddy simulation model. To generalize the results, a new parameter that expresses the intensity of gusts (the gust index, \({\tilde{U}}_{ max})\) was defined as the local maximum wind speed divided by the freestream velocity. In addition, this parameter was decomposed into the mean wind-speed ratio, \({\tilde{U}} \) and turbulent gust ratio, \({\tilde{U}}^{{\prime }}\) to evaluate the qualities of gusts. These parameters were useful for quantitatively comparing the gust intensities within urban canopies at different locations or even among different experiments. In addition, the entire horizontal domain was subdivided into homogeneous square patches, in which both the simulated gust parameters and the morphological characteristics of building geometries were averaged. This procedure masked the detailed structure of individual buildings but retained the bulk characteristics of the urban morphology. At the pedestrian level, the gust index decreased with increasing building cover. Compared to \({\tilde{U}} \), the quantity \({\tilde{U}}^{{\prime }}\) notably contributed to the index throughout the range of plan area index \((\lambda _p)\) values. The dependences of all normalized wind-speed ratios transiently changed at \(\lambda _p =~0.28\). In cases where \(\lambda _p < 0.28, {\tilde{U}} \) decreased with increasing \(\lambda _p \), although \({\tilde{U}}^{{\prime }}\) was almost constant. In cases where \(\lambda _p > 0.28, {\tilde{U}}\) was almost constant and \({\tilde{U}}^{{\prime }}\) decreased with increasing \(\lambda _p \). This was explained by the change in flow regimes within the building canyon. At a higher elevation above the canopy layer, \(\lambda _p \) becomes less relevant to normalized wind-speed ratios, and instead the aerodynamic roughness length became important.     

Comparison of Large-Eddy Simulation Data with Spatially Averaged Measurements Obtained by Acoustic Tomography – Presuppositions and First Results

An attempt is made to compare results oflarge-eddy simulation (LES) in a convective boundarylayer using the model PALM with experimental data obtained from acoustic travel time tomography.This method provides two-dimensional data arrays, which are considered as more suitable forLES-validation than classical local orline-integrated measurements, because the tomographic data are area- or volume-averaged.For a quantitative comparison with experimental data in general, some prerequisites have to be considered: First of all, the initial and boundary conditions of the LES model have to be provided correctly by the experiment. Considering measurement errors, a sensitivity study was performed to investigate the influence of inaccurate initial and boundary conditions on the simulation results.This showed that for determining some boundary conditions, such as the surface temperature and the roughness length, high measurement accuracies are necessary, which are difficult to reach or which at least require considerable extra measurement efforts.The initial and boundary conditions provided by the Lindenberg experiment in 1999 turned out to be of insufficient accuracy to allow quantitative comparisons.However, a qualitative comparison was performed instead to investigate if the acoustic tomography method is a proper method for comparisons with LES models in general.It showed a good qualitative agreement with some quantitative differences. These differences can partly be explained by the sensitivity of the LES to initial and boundary conditions and by the limitations of the acoustic tomography.     

Climate change: a profile of US climate scientists’ perspectives

Climate scientists have played a significant role in investigating global climate change. In the USA, a debate has swirled about whether a consensus on climate change exists among reputable scientists and this has entered the policy process. In order to better understand the views of US climate scientists, we conducted an empirical survey of US climate scientists (N?=?468) in 2005, and compared the results with the 2007 Intergovernmental Panel on Climate Change (IPCC) physical science report and policy summaries. Our results reveal that survey respondents generally agree about the nature, causes, and consequences of climate change, and are in agreement with IPCC findings. We also found that there is strong support for a variety of policy initiatives to reduce greenhouse gas emissions.     

Acoustic Travel Time Tomography – A Method for Remote Sensingof the Atmospheric Surface Layer

Summary Acoustic travel time tomography is demonstrated as a technique for remote monitoring of near surface air temperature and wind fields. An experimental procedure is presented which provides line-averaged values of the effective sound speed changing with air temperature and wind vector. In this study the travel times of sound signals at defined propagation paths between different acoustic sources and receivers were measured. The travel time data were inverted into effective sound speed values by using a special tomographic algorithm (Simultaneous Iterative Reconstruction Technique) to obtain area-averaged meteorological quantities (air temperature, wind speed). The method of acoustic travel time tomography will be applied to the atmosphere in order to directly provide spatially averaged data which are needed for evaluation of large-eddy simulation and microscale meteorological models as well as to complete conventional point measurements. Received November 4, 1998 Revised April 7, 1999     

Seasonal surface ocean circulation and dynamics in the Philippine Archipelago region during 2004–2008

The dynamics of the seasonal surface circulation in the Philippine Archipelago (117°E–128°E, 0°N–14°N) are investigated using a high-resolution configuration of the Regional Ocean Modeling System (ROMS) for the period of January 2004–March 2008. Three experiments were performed to estimate the relative importance of local, remote and tidal forcing. On the annual mean, the circulation in the Sulu Sea shows inflow from the South China Sea at the Mindoro and Balabac Straits, outflow into the Sulawesi Sea at the Sibutu Passage, and cyclonic circulation in the southern basin. A strong jet with a maximum speed exceeding 100 cm s⁻¹ forms in the northeast Sulu Sea where currents from the Mindoro and Tablas Straits converge. Within the Archipelago, strong westward currents in the Bohol Sea carry the surface water of the western Pacific (WP) from the Surigao Strait into the Sulu Sea via the Dipolog Strait. In the Sibuyan Sea, currents flow westward, which carry the surface water from the WP near the San Bernardino Strait into the Sulu Sea via the Tablas Strait.These surface currents exhibit strong variations or reversals from winter to summer. The cyclonic (anticyclonic) circulation during winter (summer) in the Sulu Sea and seasonally reversing currents within the Archipelago region during the peak of the winter (summer) monsoon result mainly from local wind forcing, while remote forcing dominates the current variations at the Mindoro Strait, western Sulu Sea and Sibutu passage before the monsoons reach their peaks. The temporal variations (with the mean removed), also referred to as anomalies, of volume transports in the upper 40 m at eight major Straits are caused predominantly by remote forcing, although local forcing can be large during sometime of a year. For example, at the Mindoro Strait, the correlation between the time series of transport anomalies due to total forcing (local, remote and tides) and that due only to the remote forcing is 0.81 above 95% significance, comparing to the correlation of 0.64 between the total and local forcing. Similarly, at the Sibutu Passage, the correlation is 0.96 for total versus remote effects, comparing to 0.53 for total versus local forcing. The standard deviations of transports from the total, remote and local effects are 0.59 Sv, 0.50 Sv, and 0.36 Sv, respectively, at the Mindoro Strait; and 1.21 Sv, 1.13 Sv, and 0.59 Sv at the Sibutu Passage. Nonlinear rectification of tides reduces the mean westward transports at the Surigao, San Bernardino and Dipolog Straits, and it also has non-negligible influence on the seasonal circulation in the Sulu Sea.     

Stratospheric aerosol sulfuric acid: First direct in situ measurements using a novel balloon-based mass spectrometer apparatus

The first direct in situ measurements of the sulfuric acid contained in stratospheric aerosol particles were made using a novel balloon-based Ion Molecule Reaction Mass Spectrometer instrument (IMRMS) equipped with an aerosol vaporizer. The IMRMS method employed offers direct aerosol sulfuric acid measurements with high spatial resolution. The balloon flight took place on 23 October 1995 in middle latitudes (44°N) and reached a maximum altitude of 24 km. Measured molecular number densities of aerosol sulfuric acid decreased with increasing altitude from about 2.9 × 109 cm-3 at 15km altitude to about 2.4 × 108 cm-3 at 21 km. Corresponding mass mixing ratios are 2.5 and 0.6 ppbm, respectively. Calculated sulfuric acid mixing ratios from aerosol volumes inferred from aerosol size distribution measurements on the same balloon agree well with the IMRMS data using standard assumption aerosol composition.