Beach Morphodynamics influenced by an ebb‐tidal delta on the north Florida Atlantic coast

Tidal inlets interrupt longshore sediment transport, thereby exerting an influence on adjacent beach morphology. To investigate the details and spatial extent of an inlet's influence, we examine beach topographic change along a 1.5 km coastal reach adjacent to Matanzas Inlet, on the Florida Atlantic coast. Analyses of beach morphology reveal a behavioral change between 0.64 and 0.86 km from the inlet channel centerline, interpreted to represent the spatial extent of inlet influence. Beyond this boundary, the beach is narrow, exhibits a statistically significant inverse correlation of shoreline position with offshore wave conditions, and has a uniform alongshore pattern in temporal behavior, as determined from empirical orthogonal function (EOF) analysis. On the inlet side of the boundary, the beach experiences monotonic widening (with proximity to the inlet), lacks spatial consistency in correlation between shoreline position and wave conditions, and exhibits an irregular pattern in spatial EOF modes. We augment the field observations with numerical modeling that provides calculations of wave setup and nearshore current patterns near the inlet, highlighting the effects of the ebb‐tidal delta on the assailing waves. The modeling results are verified by a natural experiment that occurred during May 2009, when a storm‐produced sedimentary mass accreted to the lower beach, then subsequently split into two oppositely directed waves of sediment that migrated away from the initial accretion site in the subsequent months. Our results suggest that the ebb‐tidal delta produces a pattern of wave setup that creates a pressure gradient driving an alongshore flow that opposes the longshore currents derived from breaking of obliquely oriented incident waves. The resulting recirculation pattern on the margin of the ebb‐tidal delta provides a mechanism through which the inlet influences adjacent barrier island beach morphology. Copyright © 2016 John Wiley & Sons, Ltd.     

Evolution of droplets in subsea oil and gas blowouts: Development and validation of the numerical model VDROP-J

The droplet size distribution of dispersed phase (oil and/or gas) in submerged buoyant jets was addressed in this work using a numerical model, VDROP-J. A brief literature review on jets and plumes allows the development of average equations for the change of jet velocity, dilution, and mixing energy as function of distance from the orifice. The model VDROP-J was then calibrated to jets emanating from orifices ranging in diameter, D, from 0.5 mm to 0.12 m, and in cross-section average jet velocity at the orifice ranging from 1.5 m/s to 27 m/s. The d₅₀/D obtained from the model (where d₅₀ is the volume median diameter of droplets) correlated very well with data, with an R² = 0.99. Finally, the VDROP-J model was used to predict the droplet size distribution from Deepwater Horizon blowouts. The droplet size distribution from the blowout is of great importance to the fate and transport of the spilled oil in marine environment.     

A review of methods and frameworks used to determine the environmental water requirements of estuaries

Abstract

Environmental flow requirements of estuaries have been ignored in the past, mostly because of the lack of long-term monitoring data or understanding of the responses to changes in freshwater inflow. In some cases, it was incorrectly assumed that the minimum flows determined for rivers would protect downstream processes and in others the omission of environmental water requirement studies for estuaries was as a result of the sectoral management of water resources or lack of applicable legislation. Three main countries have developed methods for estuaries, i.e. Australia, South Africa and the USA, from practical applications and a learning-by-doing approach. Recent methods take a holistic and adaptive standpoint and are presented as frameworks that include a number of steps and have elements of risk assessment and adaptive management. Most approaches are data rich and emphasize long-term monitoring. This review showed that, although methods are available, implementation is slow and will require strong governance structures, stakeholder participation, monitoring and feedback in an adaptive management cycle.

Editor Z.W. Kundzewicz; Guest editor M. Acreman     

Simulating the diurnal cycle of rainfall in global climate models: resolution versus parameterization

The effects of horizontal resolution and the treatment of convection on simulation of the diurnal cycle of precipitation during boreal summer are analyzed in several innovative weather and climate model integrations. The simulations include: season-long integrations of the Non-hydrostatic Icosahedral Atmospheric Model (NICAM) with explicit clouds and convection; year-long integrations of the operational Integrated Forecast System (IFS) from the European Centre for Medium-range Weather Forecasts at three resolutions (125, 39 and 16 km); seasonal simulations of the same model at 10 km resolution; and seasonal simulations of the National Center for Atmospheric Research (NCAR) low-resolution climate model with and without an embedded two-dimensional cloud-resolving model in each grid box. NICAM with explicit convection simulates best the phase of the diurnal cycle, as well as many regional features such as rainfall triggered by advancing sea breezes or high topography. However, NICAM greatly overestimates mean rainfall and the magnitude of the diurnal cycle. Introduction of an embedded cloud model within the NCAR model significantly improves global statistics of the seasonal mean and diurnal cycle of rainfall, as well as many regional features. However, errors often remain larger than for the other higher-resolution models. Increasing resolution alone has little impact on the timing of daily rainfall in IFS with parameterized convection, yet the amplitude of the diurnal cycle does improve along with the representation of mean rainfall. Variations during the day in atmospheric prognostic fields appear quite similar among models, suggesting that the distinctive treatments of model physics account for the differences in representing the diurnal cycle of precipitation.     

Dolomitization by hypersaline reflux into dense groundwaters as revealed by vertical trends in strontium and oxygen isotopes: Upper Muschelkalk,Switzerland

The Trigonodus Dolomit is the dolomitized portion of the homoclinal ramp sediments of the Middle Triassic Upper Muschelkalk in the south‐east Central European Basin. Various dolomitizing mechanisms, followed by recrystallization, have been previously invoked to explain the low δ¹⁸O, high ⁸⁷Sr/⁸⁶Sr, extensive spatial distribution and early nature of the replacive matrix dolomites. This study re‐evaluates the origin, timing and characteristics of the dolomitizing fluids by examining petrographic and isotopic trends in the Trigonodus Dolomit at 11 boreholes in northern Switzerland. In each borehole the ca 30 m thick unit displays the same vertical trends with increasing depth: crystal size increase, change from anhedral to euhedral textures, ultraviolet‐fluorescence decrease, δ¹⁸O_VPDB decrease from ?1·0‰ at the top to ?6·7‰ at the base and an ⁸⁷Sr/⁸⁶Sr increase from 0·7080 at the top to 0·7117 at the base. Thus, dolomites at the top of the unit record isotopic values similar to Middle Triassic seawater (δ¹⁸O_VSMOW = 0‰; ⁸⁷Sr/⁸⁶Sr = 0·70775) while dolomites at the base record values similar to meteoric groundwaters from the nearby Vindelician High (δ¹⁸O_VSMOW = ?4·0‰; ⁸⁷Sr/⁸⁶Sr = >0·712). According to water–rock interaction modelling, a single dolomitizing or recrystallizing fluid cannot have produced the observed isotopic trends. Instead, the combined isotopic, geochemical and petrographic data can be explained by dolomitization via seepage‐reflux of hypersaline brines into dense, horizontally‐advecting groundwaters that already had negative δ¹⁸O and high ⁸⁷Sr/⁸⁶Sr values. Evidence for the early groundwaters is found in meteoric calcite cements that preceded dolomitization and in fully recrystallized dolomites with isotopic characteristics identical to the groundwaters following matrix dolomitization. This study demonstrates that early groundwaters can play a decisive role in the formation and recrystallization of massive dolomites and that the isotopic and textural signatures of pre‐existing groundwaters can be preserved during seepage‐reflux dolomitization in low‐angle carbonate ramps.     

Toxicity of a secondary-treated sewage effluent to marine biota in Bass Strait, Australia: development of action trigger values for a toxicity monitoring program

Melbourne Water's Eastern Treatment Plant (ETP) produces a secondary-treated sewage effluent which is chlorinated and discharged into Bass Strait at Boags Rocks, Victoria, Australia. Disappearance of the sensitive brown seaweed Hormosira banksii from rock platforms immediately adjacent to the shore-line discharge was identified in the early 1990s. Subsequently, Melbourne Water and CSIRO undertook an environmental impact assessment and review of land and marine effluent disposal options, which included ambient water quality monitoring, biological monitoring, bioaccumulation studies and toxicity testing of existing effluent to assess the nature and magnitude of the environmental effects. This paper presents data from the toxicity monitoring programs since 2001. Chronic toxicity testing using macroalgal germination and cell division (H. banksii), microalgal growth rate (Nitzschia closterium) and scallop larval development (Chlamys asperrima), confirmed that ammonia was the major cause of effluent toxicity. Results from this toxicity monitoring program were used to develop action trigger values for toxicity for each species, which were then used in a refined monitoring program in 2005-2007. An upgrade of the ETP is in progress to improve nitrification/denitrification in order to reduce ammonia concentrations and the toxicity of the effluent. Toxicity testing with a simulated upgraded effluent confirmed that ammonia concentrations and toxicity were reduced. Estimated "safe" dilutions of effluent, calculated using species sensitivity distributions, decreased from 1:140-300 for existing ETP effluent to 1:20 for nitrified effluent, further confirming that treatment improvements should reduce the impact on marine biota in the vicinity of the discharge.     

Germination of Callitris seeds in relation to temperature, water stress, priming, and hydration–dehydration cycles

The effects of temperature, water stress, hydration–dehydration cycles and seed priming on the germination of Callitris verrucosa and Callitris preissii, two Australian semi-arid coniferous tree species, were investigated. Optimum germination occurred at 18°C, with a minimum germination time of 8–9 days for both species. At this temperature, germination was inhibited at osmotic potentials lower than −1·0 MPa, but the capacity to germinate at low osmotic stress increased as the temperature decreased. Seed priming and hydration–dehydration cycles did not reduce seed viability, and Callitris seeds appear to retain the physiological changes induced by short-term hydration, as the time to the onset of germination was decreased to about 3 days. The capacity of Callitris seeds for incremental germination is likely to increase overall germination success in a low rainfall environment.     

Land use and the spatial distribution of perfluoroalkyl compounds as measured in the plasma of bottlenose dolphins (Tursiops truncatus)

The distribution of perfluoroalkyl compounds (PFCs) in the environment is well documented with higher concentrations observed in wildlife located in industrial and urban areas. This study examined the distribution of PFCs in relation to land use using blood samples collected from bottlenose dolphins during capture-release health assessment surveys conducted in Charleston, SC. The study area was partitioned into three subareas (ACW, CHS, and SRE) based upon habitat and land use characteristics. The ACW and CHS subareas are characterized by high degrees of industrial and urban land uses, while the SRE subarea is more residential and characterized by a lower degree of developed land use. Long-term monitoring data from photo-identification surveys were used to group bottlenose dolphins based on their proportions of sightings in the different subareas. Dolphins affiliated with both the ACW and CHS subareas were observed to have significantly higher mean plasma concentrations of perfluorooctane sulfonate (PFOS), perfluorodecanoic acid (PFDA) and perfluoroundecanoic acid (PFUnA) than those affiliated with the SRE subarea. Dolphins affiliated with the ACW subarea were found to have a significantly higher mean plasma concentration of PFUnA than those affiliated with the CHS subarea. Further examination of the distribution of the PFCs revealed positive correlations with developed land uses and negative correlations with wetland/marsh land cover. A positive correlation was also observed between PFUnA and agricultural land use. The variability and scale of the observed contaminant burdens have important implications for the conservation and management of living marine resources and illustrates the importance of long-term monitoring of free-ranging wildlife species.     

Geological history and significance of a laminated and slumped unit in the Carboniferous Limestone of the Monsal Dale region,Derbyshire

A laminated and slumped limestone bed from the Carboniferous Limestone of Derbyshire, known as the Rosewood Marble, is described in detail. The laminations comprise alternations of micrite and dolomite, the dolomite laminae originally being fine grainstones. The bed was deposited on a slope and slipping and sliding gave rise to tensional features such as pull-apart structures and compressional features such as slump folds. Evidence suggests that the palaeoslope was inclined towards the south-southeast and caused by synsedimentary movements of the Longstone Edge monocline and/or the Priestcliffe syncline. Diagenetic features described include cementation, dolomitization, calcite pseudomorphs after replacement anhydrite and silicification.     

Evolution of exhumation and erosion in western West Gondwanaland as recorded by detrital zircons of late Neoproterozoic and Cambrian sedimentary rocks of NW and Central Argentina

The evolution of the provenance areas for Late Neoproterozoic, Cambrian and Early Ordovician sedimentary and meta-sedimentary rocks of north central and northwest Argentina is discussed using 123 maximum ages of detrital zircons from 42 samples from this and previously published studies. Most detrital zircon ages fall into two groups: 1,200–900 Ma and 670–545 Ma. These ages are essentially identical for the non- to very low grade metamorphic late Neoproterozoic to Early Cambrian Puncoviscana Formation and the low to high grade metamorphic rocks of Eastern Sierras Pampeanas. Hence, both units are related to similar provenance areas at the same time of sedimentation. The time span from zircon crystallization in the Earth’s crust to exhumation and erosion may be very long. This is important when determining maximum ages of sedimentary rocks. Variation of zircon maxima may also be influenced by concurrent sedimentary cover of proposed provenance areas. For the late Mesoproterozoic to early Neoproterozoic zircon age group, an active mountain range of the southwest Brazilian Sunsás orogen is the most probable provenance area. The younger, late Neoproterozoic zircons are related to the continuously developing mountains of the Brasiliano orogen of southwest and south central Brazil. Young zircons, up to 514 Ma, from fossil-bearing Puncoviscana and Suncho Formation outcrops are related to late Early Cambrian volcanism contemporaneous with sedimentation. This situation continues through the Late Cambrian to the Early Ordovician, but the Sunsás orogen provenance diminishes as possible Río de la Plata craton origins become important.