北京及邻区微震活动的初步分析

通过对北京遥测地震台网近年来记录到的北京及邻区地震的震中分布,地震活动频度及能量释放强度的分析,得到本区地震活动在时间分布上具有“聚堆性”。在年发震频度,地震强度和能释放方面均具有双峰值特征,并且具有较好的一致性和同步性,在空间分布上具有条带特征,且形成北东～南西和北西～南东的两条相互交汇的条带。又通过统计分析得到本区发震概率最大的时间段是每年的１０月前后,而地震主要发生在北西～南东带上。     

《干旱区地理》的引文统计分析

本文使用文献计量学中的引文分析方法,以《干旱区地理》为调查样本进行了统计分析。《干旱地理》１９８５－１９９４年共版４３期,刊登论文５５８篇,其中附有引文的论文４３６篇,引文２７６６条。     

处理水环境中微量铬的菌种筛选研究

从云南各地采集微生物菌种进行筛选、驯化,找到一株对水环境中的微量铬具有良好吸附去除能力的菌种,并研究了碳源、氮源、培养液pH值和培养温度等因素对其去除铬的影响.试验结果表明,去除水环境中微量铬的适宜菌种的培养条件为以可溶性淀粉为碳源、（NH4）2SO4为氮源、培养温度25℃、培养液pH 8,培养液中碳：氮=10：1,利用该条件培养的菌种对水环境中微量铬具有较好的去除能力.     

岩溶区集中式饮用水源地水质评价与保护——以毕节市倒天河水库和利民水库为例

采用SPSS软件，对2003年01月至2004年12月期间，倒天河水库和利民水库逐月水质监测数据进行数理统计分析，结果表明毕节市饮用水水质污染有较明显的季节变化和空间差异；且不同污染物对水体污染的贡献率各不相同，总磷和粪大肠菌群所占份额最大，方差累积贡献率达77％。在此基础上，利用加权综合污染指数对水体水质污染现状进行综合评价，结果显示倒天河水库和利民水库，水质污染总体较轻．饮用水水质符合《地表水环境质量标准（GB3838—2002）》中Ⅲ类水质标准；最后提出加大水环境保护的建议。     

Study on the kinetics of iron oxide leaching by oxalic acid

The presence of iron oxides in clay or silica raw materials is detrimental to the manufacturing of high quality ceramics. Although iron has been traditionally removed by physical mineral processing, acid washing has been tested as it is more effective, especially for extremely low iron (of less than 0.1% w/w). However, inorganic acids such as sulphuric or hydrochloric acids easily contaminate the clay products with SO₄²⁻ and Cl⁻, and therefore should be avoided as much as possible. On the other hand, if oxalic acid is used, any acid left behind will be destroyed during the firing of the ceramic products. The characteristics of dissolution of iron oxides were therefore investigated in this study.The dissolution of iron oxides in oxalic acid was found to be very slow at temperatures within the range 25–60 °C, but its rate increases rapidly above 90 °C. The dissolution rate also increases with increasing oxalate concentration at the constant pH values set within the optimum range of pH2.5–3.0. At this optimum pH, the dissolution of fine pure hematite (Fe₂O₃) (105–140 μm) follows a diffusion-controlled shrinking core model. The rate expression expressed as 1 − (2 / 3)x − (1 − x)^2 / 3 where x is a fraction of iron dissolution was found to be proportional to [oxalate]^1.5.The addition of magnetite to the leach liquor at 10% w/w hematite was found to enhance the dissolution rate dramatically. Such addition of magnetite allows coarser hematite in the range 0.5–1.4 mm to be leached at a reasonable rate.     

CQK-50型车载化钻机的研制

在分析研究小型地质车载钻机的形式、功能与特点的基础上，提出了钻机车载化的新思路。根据地质调查工作现状，结合国内现有小型地质取样钻机，研制了CQK-50型全液压多功能车载取样钻机，并在野外物化探遥感异常验证钻探中取得了良好效果。     

遥感技术在煤炭地质中的应用现状及前景

介绍了遥感技术在煤炭资源调查和评价、煤矿区地质灾害调查和评估、生态环境及污染调查评价和监测以及煤矿三维可视化仿真规划系统建设方面的应用研究现状及所取得的主要成果，并结合遥感技术的发展方向，展望了其在煤炭地质中的应用前景。     

Comparison of magnetic parameters with vehicular Br levels in urban roadside soils

Chemical methods are generally chosen to monitor soil pollution but magnetic measurements proved to yield additional information at low cost and less time consumption. In this investigation, the novel use of rapid and non-destructive magnetic measurements to characterize Br levels in Xuzhou (China) urban roadside soils was reported. X-ray fluorescence spectrometry (XRF) was used to quantify Br in the soil samples. Data from 21 roadside soil samples confirm Br contamination, with a mean level of 4.36 mg kg⁻¹ and a range of 2.4–8.7 mg kg⁻¹. These values are higher than that of unpolluted soils in Xuzhou that averages 1.1 mg kg⁻¹. Hierarchical clustering analysis shows Br in Xuzhou roadside soils is mainly from road traffic. Clear correlations between Br levels and simple magnetic parameters [mass specific susceptibility (χ _LF), susceptibility of anhysteretic remanent magnetization (χ _ARM), saturation isothermal remanence (SIRM)] are observed. The present study shows that these three magnetic parameters can be used as a proxy for Br levels in Xuzhou urban roadside soils.     

USB总线与CAN总线协议转换器设计

现场总线(F ield bus)是将自动控制系统中底层的现场控制器和现场智能仪表设备互连的实时控制通讯网络,是5C(Computer,Control,Commun ication,CRT,Change)技术相结合的产物。CAN(Control Area Network)总线是现场总线的一种,广泛应用于汽车行业、机械工业、家用电器、传感器等领域,已经形成国际标准,是被公认的几种最有前途的现场总线之一。提出了一种通过计算机USB接口实现现场总线CAN与计算机(服务器)之间通信的方案。具体介绍了使用USB总线接口芯片CH372和独立的CAN控制器SJA1000实现的硬件电路设计方法、本地端软件的编写方法,给出了主要程序模块的流程。     

关于求解碾磨机运动问题的相关讨论

针对关于求解碾磨机上一点运动的速度及加速度的问题展开讨论,从运动的不同角度考虑,给出了n种不同的解法。并将此问题拓展到一般情况下进行讨论,得出正确结论。并就一些相关问题进行了分析和解释。