Non-linear motions of Australian geodetic stations induced by non-tidal ocean loading and the passage of tropical cyclones

We investigate daily and sub-daily non-tidal oceanic and atmospheric loading (NTOAL) in the Australian region and put an upper bound on potential site motion examining the effects of tropical cyclone Yasi that crossed the Australian coast in January/February 2011. The dynamic nature of the ocean is important, particularly for northern Australia where the long-term scatter due to daily and sub-daily oceanic changes increases by 20–55 % compared to that estimated using the inverted barometer (IB) assumption. Correcting the daily Global Positioning System (GPS) time series for NTOAL employing either a dynamic ocean model or the IB assumption leads to a reduction of up to 52 % in the weighted scatter of daily coordinate estimates. Differences between the approaches are obscured by seasonal variations in the GPS precision along the northern coast. Two compensating signals during the cyclone require modelling at high spatial and temporal resolution: uplift induced by the atmospheric depression, and subsidence induced by storm surge. The latter dominates ( \(>\) 135 %) the combined net effect that reaches a maximum of 14 mm, and 10 mm near the closest GPS site TOW2. Here, 96 % of the displacement is reached within 15 h due to the rapid transit of cyclones and the quasi-linear nature of the coastline. Consequently, estimating sub-daily NTOAL is necessary to properly account for such a signal that can be 3.5 times larger than its daily-averaged value. We were unable to detect the deformation signal in 2-hourly GPS processing and show that seasonal noise in the Austral summer dominates and precludes GPS detection of the cyclone-related subsidence.     

Shoreline Change Analysis along the Coast of South Gujarat,India, Using Digital Shoreline Analysis System

Shoreline changes along the south Gujarat coast has been analyzed by using USGS Digital Shoreline Analysis System (DSAS) version 4.3. Multi-temporal satellite images pertaining to 1972, 1990, 2001 and 2011 were used to extract the shoreline. The High water line (HTL) is considered as shoreline and visual interpretation of satellite imageries has been carried out to demarcate the HTL based on various geomorphology and land use & land cover features. The present study used the Linear Regression Method (LRR) to calculate shoreline change rate. Based on the rate of shoreline changes, the coastal stretches of study area has been classified in to high erosion, low erosion, stable, low accretion and high accretion coast. The study found that about 69.31 % of the South Gujarat coast is eroding, about 18.40 % of coast is stable and remaining 12.28 % of the coast is accreting in nature. Field investigation was carried out which confirmed the coastal erosion/accretion derived from the analysis. The high erosion area are mostly found along the Umergaon (near Fansa, Maroli, Nargol, Varili river mouth, Umergaon light house) and Pardi (Kolak, Udwara)Taluka in Valsad district. Stable coastal length of the study area is 21.59 km and mostly found in Nani Dandi and near Onjal. High accretion (3.70 %) was only found near Hajira and low accretion (8.58 %) are distributed the study area. The main causes of coastal erosion of the study area were the strong tidal currents accompanied by wave action and reduced the sediment load of the river.     

Generation of Vegetation Fraction and Surface Albedo Products Over India from Ocean Colour Monitor (OCM) Data Onboard Oceansat-2

The use of Local Area Coverage (LAC) data from Ocean Color Monitor (OCM) sensor of Oceansat-2 with its high radiometric resolution (12 bits/pixel) and 2-day repeat cycle for rapid monitoring of vegetation growth and estimating surface albedo for the Indian region is demonstrated in this study. For the vegetation monitoring, normalized difference vegetation index (NDVI) and vegetation fraction (VF) products were estimated by maximum value composite approach fortnightly and were resampled to 1 km. The surface albedo products were realized by converting narrow-band eight-band spectral reflectance OCM data to a) visible (300–700 nm) and b) broad band (300–3,000 nm) data. For validation, the derived products were compared with respective MODIS global products and found to be in good agreement.     

A GIS-based glacier inventory for the Antarctic Peninsula and the South Shetland Islands —A first case study on King George Island

The aim of the international project “Global Land Ice Measurements from Space (GLIMS)” headed by the US Geological Survey is to establish a world wide glacier inventory based on satellite imagery. This data set will form a first digital baseline study for future glacier monitoring. The presented GIS-based glacier inventory for King George Island is a case study for the area of the Antarctic Peninsula. In the database of the glacier inventory topographic information, specific glaciological parameters as well as metadata will be included. The topographic data consists of drainage basin limits, basin areas, altitudinal ranges, perimeters and mean lengths. Glaciological data sets should comprise information on glacier retreat in different periods, glacier velocities, ice thickness and bedrock topography as well as derived parameters. Modelled and measured mass balance parameters could be included as additional data layers. In particular, these metadata records must comprise background information on data accuracy and data sources and should be compatible with a future data model for the King George Island GIS (KGIS). Three examples illustrate that the GLIMS database will not only contain information valuable for glaciological applications, but also other environmental studies on the island will benefit from this standardised remote sensing data sets. Therefore, a very close link between the data models of KGIS and GLIMS has to be established to enable these synergisms. Finally, better access to historic aerial photography would enable a continuous record of glacier retreat from the beginning of the 1950's onward.     

Monitoring of salt affected soils — A case study using aerial photographs,salyut‐7 space photographs,and landsat TM data

Soils of part of Ukai‐kakarapar Command area, Gujarat (India) have been mapped at 1:25, 000 scale using aerial photographs of December 1977. It was observed that about 36.3% of the area was affected by soil salinity/alkalinity. The test area has been remapped using Salyut‐7 space photographs taken during Indo‐Soviet joint flight in April, 1984. The area affected by soil salinity/alkalinity was found to be substantially higher (80.3%). The earlier mapping using aerial photographs was done when the soil surface was compartively moist (December 1977) as compared to date of Salyut‐7 photography (April 1984), when the soil surface was likely to be devoid of moisture and the salts moved to the surface. To have easy comparision with the map prepared by using aerial photographs, Landsat TM data of December, 1985 was used in which 45.7% of the total area was mapped as salt affected. The extent of area delineated using Landsat TM was higher than that of 1977 but much lesser than the area delineated using Salyut‐7 (MKF‐6M) photographs. This indicated that the increase in the extent of salt affected area in the map prepared using the MKF‐6M photographs might be partly due to actual increase in the salinity/alkalinity and partly due to the seasonal affects. Among the various bands of MKF‐6M, band ‐4 was found to be the best for delineating the salt affected soils. The boundaries were sharper in the FCC and band No.4 of MKF‐6M than in the aerial photographs.     

Earth observations during space shuttle flight STS‐41: Discovery's mission to planet earth

Abstract

Multi‐temporal ERS‐1 SAR data acquired over a large agricultural region in West Bengal was used to classify kharif crops like rice, jute and sugarcane. Rice crop grown under lowland management practice showed a temporal characteristic. The dynamic range of backscatter was highest for this crop in temporal SAR data. This was used to classify rice using temporal SAR data. Such temporal character was not observed for the other study crops, which may be due to the difference in cultivation practice and crop calendar. Significant increase in backscatter from the ploughed fields was used to derive information on onset and duration of land preparations. Synergistic use of optical remote sensing data and SAR data increased the separability of rice crop from homesteads and permanent vegetation classes.     

Statewide groundwater‐vulnerability assessment in nebraska using the drastic/GIS model

The paper summarizes a technique for implementing the “DRASTIC” groundwater‐vulnerability model within the context of an automated raster‐based geographic information system. Discussion focuses on a methodological development and a statewide project completed recently in Nebraska. The final products, a comprehensive flow chart illustrating procedures and a map of calculated potential pollution hazard, are presented. The methodology can be executed successfully with minimal training and experience. Areas of Nebraska considered vulnerable to groundwater pollution are identified.     

Determination of turbidity patterns of the Zhujiang estuarine region,South China,using satellite images and a GIS approach

Landsat MSS images and SPOT HRV data were employed to map the changes in turbidity levels in the Zhujiang estuarine region, South China, during the dry season in the period 1973–1987 at low and high tides. Analysis of turbidity trends and changes in the spatial pattern of high turbidity class was carried out with a GIS software—IDRISI. It was concluded that with the use of OVERLAY and RECLASS functions in the GIS approach a large number of turbidity maps could be easily compared and the turbidity trend determined. The GIS approach further permitted evaluation of the importance of such factors as water depths, mean tidal differences, and water salinity to sedimentation in the study region.     

Surface description for urban climate studies: A gis based methodology

In order to understand the nature of the urban climate, predict the effects of urbanization, or attempt to ameliorate some of the negative hydroclimatic effects of urbanization, it is necessary to have a good understanding of the role and significance of the urban surface. This paper presents a methodology which uses GIS to represent the characteristics and morphology of the urban surface, which can be used to describe a site objectively, model fluxes, or ensure spatial consistency between measured and modelled data, all of which can vary through time. The methodology is illustrated with respect to Chicago, Illinois. Surface data collected at three spatial scales were used to construct a georeferenced database which was linked to an objective, dynamic accessing system. Spatial variability of surface cover, derived hydroclimatic attributes, and modelled fluxes associated with changes in the urban environment are used to illustrate potential applications of the approach.     

Crop area monitoring within an advanced agricultural information system

This paper describes a framework for an image processing procedure for operational agricultural crop area estimation. This operational framework has been conceived within the development of an Advanced Agricultural Information System (AAIS) for the “Regione del Veneto “ (RdV ‐ Veneto Region) in northeastern Italy. The objective of this program is to develop the ability to generating timely and accurate area estimates and production information for four major agricultural crops: soybeans, sugar beets, corn, and small grains. AAIS uses state of the art methods in remote sensing and geographic information systems (GIS) technology and integrates a variety of data types including satellite imagery. This paper describes the methodology developed for image and ancillary data processing for the production of crop area statistics. Using a combination of standard unsupervised classification and GIS operations that incorporate knowledge about the agricultural system, a “sequential masking” classification procedure was derived. This sequential masking procedure yielded crop classification accuracies that at the study site level range between 76% and 99% depending on the crop under study. We believe that classification accuracies will improve with full system implementation, along with the incorporation of new and/or improved thematic information and operational experience using AAIS‐based estimation.