Application of time- and magnitude-predictable model for long-term earthquake prediction in Iran

The regional time- and magnitude-predictable model has been applied successfully in diverse regions of the world to describe the occurrence of main shocks. In the current study, the model has been calibrated against the historical and instrumental catalog of Iranian earthquakes. The Iranian plateau is divided into 15 seismogenic provinces; then, the interevent times for strong main shocks have been determined for each one. The empirical relations reported by Papazachos et al. (Tectonophysics 271:295–323, 1997a) for the Alpine–Himalayan belt (including Iran) were adopted except for the constant terms that were calculated separately for every seismotectonic area. By using the calibrated equations developed for the study area and taking into account the occurrence time and magnitude of the last main shocks in each seismogenic source, the time-dependent conditional probabilities of occurrence P(?t) of the next main shocks during next 10, 20, 30, 40 and 50 years as well as the magnitude of the expected main shocks (M _f) have been estimated. The immediate probability (within next 10 years) of a large main shock is estimated to be high and moderate (>35 %) in all regions except zones 9 (M _f = 5.8) and 15 (M _f = 6.1). However, it should be noted that the probabilities have been estimated for different M _f values in 15 regions. Comparing the model predictions with the actual earthquake occurrence rates shows the good performance of the model for Iranian plateau.     

Ar–Ar age determinations of eclogitic clinopyroxene and garnet inclusions in diamonds from the Venetia and Orapa kimberlites

Ar–Ar age measurements are reported for selected eclogitic clinopyroxene and garnet inclusions in Orapa diamonds and clinopyroxene inclusions in Venetia diamonds. Laser drilling of encapsulated clinopyroxene inclusions within Venetia diamonds released a maximum of 3% of the total ⁴⁰Ar, indicating little diffusive transfer and storage of radiogenic ⁴⁰Ar at the diamond–inclusion boundary. Apparent ages obtained during stepped heating of three diamonds are consistent with diamond crystallisation occurring just prior to the kimberlite eruption 520 Ma ago. Stepped heating of three clinopyroxene-bearing Orapa diamonds gave ages of 906–1032 Ma, significantly above the eruption age, but consistent with previously determined isotopic ages. A few higher apparent ages hint at the presence an older generation of Orapa diamonds that formed >2500 Ma ago. Orapa garnets also contain measurable K contents, and record a range of ages between 1000 and 2500 Ma. The old apparent ages and lack of significant interface ⁴⁰Ar released by the laser probe, suggests that pre-eruption radiogenic ⁴⁰Ar and mantle-derived ⁴⁰Ar components are trapped in microinclusions within the pyroxene and garnet inclusions.     

Investigation of ammonia removal from polluted waters by Clinoptilolite zeolite

Ammonia nitrogen compounds in the wastewaters and effluents have harmful effects on water resources. Ion exchange with zeolites is a separation process for ammonia removal from effluents. The objective of this research was to study the efficiency of an ammonia removal and the factor affecting to this process. The Clinoptilolite was obtained from Semnan mines at the north part of Iran. The samples were grounded and sieved based on the U.S. standard mesh number 20, 30, 40 and conditioned by ammonia sulfate and sodium chloride solutions. The characteristics of samples for ammonia removal and the selectivity sequence for adsorbing interfering cations were then determined. Results shown that the average ion exchange capacity of zeolite in batch and continuous systems were 6.65–16 and 16.31–19.5 mg NH₄ ⁺ /g zeolite weight, respectively. In study on the zeolite for selective cations showed the ranking of K⁺, NH₄ ⁺, Na⁺, Ca²⁺ and Mg²⁺ respectively. Results indicated that high level of regeneration (95–98%) might be achieved with NaCl solution. Based on the results, Clinoptilolite may be effective applied in wastewater treatment, both from technical and economical aspects.     

Flow behind an attached shock wave in a radiating gas

A simple method is used to determine the curvature of an attached shock wave and the flow variable gradients behind the shock curve at the tip of a straight-edged wedge placed symmetrically in a supersonic flow of a radiating gas near the optically thin limit. The shock curvature and the flow variable gradients along the wedge at the tip are computed for a wide range of upstream flow Mach numbers and wedge angles. Several interesting results are noted; in particular, it is found that the effect of an increase in the upstream flow Mach number or the radiative flux is to enhance the shock wave curvature which, however, decreases with an increase in the specific heat ratio or the wedge angle.     

Experiments on steady buoyancy transfer through turbulent fluid layers separated by density interfaces

A laboratory experiment was performed to investigate mixing across a density interface which separates two turbulent fluid layers and coexists with a stabilizing buoyancy flux. It was found that the buoyancy flux (q₀) across the interface and through the turbulent layers (of depth D) becomes steady and constant in magnitude in the vertical direction, only when , where u is the horizontal r.m.s. velocity at the base of the mixed layers. The results suggest that mixing across the density interface is controlled by a dynamically important buoyancy gradient induced in the turbulent layers and that parameters such as the bulk Richardson number, , where Δb is the interfacial buoyancy jump, are of secondary importance. Measurements are used to infer the mixing mechanism at the interface, the mixing efficiency of stratified fluids and the entrainment law. Some geophysical applications of the results are also discussed.     

Tides in the Tongan Region of the Pacific Ocean

Tidal levels and currents in the Tongan region of the Pacific were simulated using a two-dimensional frequency-domain finite element model. The eight major diurnal and semidiurnal tidal constituents were modeled successfully, using open boundary conditions taken from a global tidal model based on the Topex/Poseidon satellite altimeter. Comparison of model results with observations from the single tide gauge site in the area were later used to adjust the boundary conditions. The validity of omitting horizontal eddy viscosity from the finite element model was checked by running an equivalent finite difference model. The results show that although the submarine Tongan ridge does not appear to trap tidal energy, there are residual tidal currents and possible recirculations which are capable of influencing biological productivity around Tonga. The model results are reduced to a simple method for predicting tidal heights in outlying areas, based only on the tidal calendar for the capital, Nuku'alofa.     

Isolation and Characterization of Collagen from Squid(Ommastrephes bartrami) Skin

Collagen of squid(Ommastrephes bartrami) skin was examined in the present study. Histology showed that collagen fiber in the skin was partially cross-linked with muscle fiber. Acid-solubilized collagen(ASC) and pepsin-solubilized collagen(PSC) were extracted from the skin and characterized. The results of amino acid composition and electrophoretic patterns revealed that ASC and PSC were both type Ⅰ collagen,containing α1 and α2 chains. FTIR(fourier transform infrared spectroscopy) investigations confirmed t...