Correction method for full-depth current velocity with lowered acoustic Doppler current profiler (LADCP)

A new method is presented to process and correct full-depth current velocity data obtained from a lowered acoustic Doppler current profiler (LADCP). The analysis shows that, except near the surface, the echo intensity of a reflected sound pulse is closely correlated with the magnitude of the difference in vertical shear of velocity between downcast and upcast, indicating an error in velocity shear. The present method features the use of echo intensity for the correction of velocity shear. The correction values are determined as to fit LADCP velocity to shipboard ADCP (SADCP) and LADCP bottom-tracked velocities. The method is as follows. Initially, a profile of velocity relative to the sea surface is obtained by integrating vertical shears of velocity after low-quality data are rejected. Second, the relative velocity is fitted to the velocity at 100–800 dbar measured by SADCP to obtain an “absolute” velocity profile. Third, the velocity shear is corrected using the relationship between the errors in velocity shears and echo intensity, in order to adjust the velocity at sea bottom to the bottom-tracked velocity measured by LADCP. Finally, the velocity profile is obtained from the SADCP-fitted velocity at depths less than 800 dbar and the corrected velocity shear at depths greater than 800 dbar. This method is valid for a full-depth LADCP cast throughout which the echo intensity is relatively high (greater than 75 dB in the present analysis). Although the processed velocity may include errors of 1–2 cm s⁻¹, this method produced qualitatively good current structures in the Northeast Pacific Basin that were consistent with the deep current structures inferred from silicate distribution, and the averaged velocities were significantly different from those calculated by the Visbeck (2002) method.     

Effects of cold eddy on phytoplankton production and assemblages in Luzon strait bordering the South China Sea

The biochemical effects of a cold-core eddy that was shed from the Kuroshio Current at the Luzon Strait bordering the South China Sea (SCS) were studied in late spring, a relatively unproductive season in the SCS. The extent of the eddy was determined by time-series images of SeaWiFS ocean color, AVHRR sea surface temperature, and TOPEX/Jason-1 sea surface height anomaly. Nutrient budgets, nitrate-based new production, primary production, and phytoplankton assemblages were compared between the eddy and its surrounding Kuroshio and SCS waters. The enhanced productivity in the eddy was comparable to wintertime productivity in the SCS basin, which is supported by upwelled subsurface nitrate under the prevailing Northeastern Monsoon. There were more Synechococcus, pico-eucaryotes, and diatoms, but less Trichodesmium in the surface water inside the eddy than outside. Prochlorococcus and Richelia intracellularis showed no spatial differences. Water column-integrated primary production (IPP) inside the eddy was 2–3 times that outside the eddy in the SCS (1.09 vs. 0.59 g C m⁻²d⁻¹), as was nitrate-based new production (INP) (0.67 vs. 0.25 g C m⁻²d⁻¹). INP in the eddy was 6 times that in the Kuroshio (0.12 g C m⁻²d⁻¹). IPP and INP in the eddy were higher than the maximum production values ever measured in the SCS basin. Surface chlorophyll a concentration (0.40 mg m⁻³) in the eddy equaled the maximum concentration registered for the SCS basin and was higher than the wintertime average (0.29 ± 0.04 mg m⁻³). INP was 3.5 times as great and IPP was doubled in the eddy compared to the wintertime SCS basin. As cold core eddies form intermittently all year round as the Kuroshio invades the SCS, their effects on phytoplankton productivity and assemblages are likely to have important influences on the biogeochemical cycle of the region.     

Australia’s no-take marine protected areas: Appropriate conservation or inappropriate management of fishing?

The absence of properly identified mechanisms to adequately protect the marine environment remains a major shortcoming in Australia’s commitment to biodiversity conservation. The current commitment to a National Representative System of Marine Protected Areas (NRSMPA) falls far short of providing adequate protection against the suite of existing and potential threats even though areas are designated as being ‘protected’. In this paper it is argued that the actions taken under the NRSMPA are disproportionately concentrated on regulating fishing, including the closing of areas in so-called sanctuary zones to all types of fishing. In the absence of clearly identified threats from most forms of fishing and without assessment of how best to manage those few fishing threats that have been identified, such actions are inefficient and mostly inappropriate. Moreover, they do not provide adequate protection against the full suite of threats to marine environments. Adequate measures for the proper conservation of these areas and/or the protection of marine biodiversity more generally are not being provided and in most cases threats are not even adequately described and evaluated.     

Deep-water geomorphology of the glaciated Irish margin from high-resolution marine geophysical data

The continental margin offshore of western Ireland offers an opportunity to study the effects of glacial forcing on the morphology and sediment architecture of a mid-latitude margin. High resolution multibeam bathymetry and backscatter data, combined with shallow seismic and TOBI deep-towed side-scan sonar profiles, provide the basis for this study and allow a detailed geomorphological interpretation of the northwest Irish continental margin. Several features, including submarine mass failures, canyon systems and escarpments, are identified in the Rockall Trough for the first time. A new physiographic classification of the Irish margin is proposed and linked to the impact of glaciations along the margin. Correlation of the position and dimensions of moraines on the continental shelf with the level of canyon evolution suggests that the sediment and meltwater delivered by the British–Irish Ice Sheet played a fundamental role in shaping the margin including the upslope development of some of the canyon systems. The glacial influence is also suggested by the variable extent and backscatter signal of sedimentary lobes associated with the canyons. These lobes provide an indirect measurement of the amount of glaciogenic sediment delivered by the ice sheet into the Rockall Trough during the last glacial maximum. None of the sedimentary lobes demonstrates notable relief, indicating that the amount of glaciogenic sediment delivered by the British–Irish Ice Sheet into the Rockall Trough was limited. Their southward disappearance suggests a more restricted BIIS, which did not reach the shelf edge south of 54°23′ N. The various slope styles observed on the Irish margin represent snapshots of the progressive stages of slope development for a glacially-influenced passive margin and may provide a predictive model for the evolution of other such margins.     

Hydroelastic optimisation of a composite marine propeller in a non-uniform wake

The purpose of this paper is to optimise the hydroelastic performance of a composite marine propeller to reduce vibration and dynamic stress. A hydroelasticity method based on the finite element method (FEM) coupled with computational fluid dynamics (CFD) is used to simulate the composite marine propeller in a non-uniform wake. Composite blades can be considered as a cantilever-like laminated structure experiencing an unsteady hydrodynamic load and centrifugal force. The objective of the improved design is to minimise the vibratory hub loads. The ply angle and stacking sequence are considered as the design variables. The nonlinear periodic transient responses and vibration hub loads of the composite blade are obtained by solving coupled equations using the Newton–Raphson numerical procedure. Compared to the starting design of the propeller, the optimum solution results in a 49.6–70.6% reduction of the 7/rev hub loads.     

Further birth records of elephant seals Mirounga leonina in New Zealand (note)

The second and third recorded births of southern elephant seals Mirounga leonina on the mainland of New Zealand occurred at Kaikoura in mid‐October 1976. One female pup died within 14 d of birth and the other (sex unknown) disappeared from the region with its mother on 19 November 1976.     

Depth of settlement of two mussel species on suspended collectors in Marlborough Sounds,New Zealand (Note)

The preferred depth of settlement and settlement period of two species of mussel spat were monitored at Yncyca Bay (NZMS1 S15 220460) and Wet Inlet (NZMS1 S16 265432) in the Marlborough Sounds on collectors suspended in 0–4 m of water between 20 October 1975 and 4 April 1976. Peak settlement of Mytilus edulis aoteanus was between 20 October 1975 and 4 January 1976, and decreased with increasing depth. Peak settlement of Perna canaliculus was between 16 February 1976 and 12 April 1976, and showed no preferred depth of settlement.

Capture of wild stocks of Mytilus edulis aoteanus and Perna canaliculus spat for use in aquaculture has become more reliable through accurate forecasting of peak settlement periods, and knowledge of preferred depth of settlement of the two species.

Preferred depth of settlement of spat may affect the shore zonation of mussels.     

A new species of Plaxiphora (Mollusca: Polyplacophora) from southern New Zealand

Plaxiphora boydeni n.sp. from wave‐exposed rocky shores of southern New Zealand is described and illustrated. This is the first published record of the genus from the New Zealand mainland. P. boydeni is readily distinguished from the 2 other New Zealand species of the genus, which occur in the subantarctic region, by the absence of bristle‐tufts on the girdle.     

The effect of membrane filtration on estimates of microbial ATP in New Zealand freshwaters

Concentrations of microbial ATP in 15 New Zealand lakes were determined using 2 extraction techniques. ATP was found in both the paniculate (>0.45 μm) and dissolved (<0.45 μm) fractions of the water samples. Higher concentrations of paniculate ATP were obtained when ATP was extracted directly from freshwater samples rather than following pre‐concentration on to membrane filters. Recovery of particulate ATP declined with increasing volumes of sample filtered. The magnitude of the filtration effect varied unpredictably between lakes and within lakes with time. Corrections for the presence of dissolved ATP were necessary before estimates of particulate ATP could be made by the direct extraction technique. Concentrations of dissolved ATP up to 1.2 μg L^‐1 were observed. The direct extraction technique is recommended for more accurate determination of particulate ATP in New Zealand freshwaters.     

Two acoustic surveys of pelagic fish in Hawke Bay,New Zealand, 1980

The design and execution of two acoustic surveys of Hawke Bay in February and September/October 1980 are described. Though the resulting acoustic data were, for technical reasons, of limited value, they illustrate the information which may be drawn from acoustic surveys. Fish distributions may be rapidly mapped, not only by area, but throughout most of the water column and over time. Qualitative observations on fish distribution may be quantified. The estimation of variance in acoustic surveys is discussed in detail with particular emphasis on the problems of systematic surveys. The role of replicate observations is stressed. Coefficients of variation for relative fish density estimates from the two surveys probably lie between 5 and 30%.