Mineral magnetic and physical properties of surficial sediments and onshore samples from the southern basin of Lake Baikal, Siberia

Results of lithostratigraphic and mineral magnetic analysis of two surficial sediment cores (21 cm and 45 cm in length) collected from the Southern basin of Lake Baikal at a water depth of 1390 m, are presented. The sediments have been measured for a wide range of mineral magnetic parameters in order to assess their value in the identification of turbidite layers. Particle size and geochemical data are also presented and these explain some of the down core variations in magnetic mineralogy. It is suggested that changes in the particle size frequency distributions down core may be related to fossil diatom shells. One of the cores has been dated using ²¹⁰Pb. The sediment cores were cross-correlated using low frequency magnetic susceptibility (f) and these cores can also be correlated with a nearby core collected earlier in 1992. Changes in the magnetic parameters of lf, IRMs and HIRM₂₁₀ suggest that there are significant changes in the concentration of ferrimagnetic minerals in the sediment cores, indicating changing sediment sources and/or increasing concentrations of spheroidal carbonaceous particles and the dissolution of minerals through reduction below the oxidised layer within the sediment core.     

Spectroscopic binaries near the North Galactic Pole paper 6: BD 33° 2206

Photoelectric radial-velocity measurements have confirmed O. C. Wilson’s finding that BD 33° 2206, the secondary star in the wide visual binary ADS 8470, is a spectroscopic binary. It has an eccentric orbit with a period of 100 days. Its γ-velocity is close to the constant radial velocity of the visual primary, confirming the physical association of the stars.     

Fracturing and fluid‐flow during post‐rift subsidence in carbonates of the Jandaíra Formation,Potiguar Basin,NE Brazil

Pervasive fracture networks are common in many reservoir‐scale carbonate bodies even in the absence of large deformation and exert a major impact on their mechanical and flow behaviour. The Upper Cretaceous Jandaíra Formation is a few hundred meters thick succession of shallow water carbonates deposited during the early post‐rift stage of the Potiguar rift (NE Brazil). The Jandaíra Formation in the present onshore domain experienced <1.5 km thermal subsidence and, following Tertiary exhumation, forms outcrops over an area of >1000 km². The carbonates have a gentle, <5?, dip to the NE and are affected by few regional, low displacement faults or folds. Despite their simple tectonic history, carbonates display ubiquitous open fractures, sub‐vertical veins, and sub‐vertical as well as sub‐horizontal stylolites. Combining structural analysis, drone imaging, isotope studies and mathematical modelling, we reconstruct the fracturing history of the Jandaíra Formation during and following subsidence and analyse the impact fractures had on coeval fluid flow. We find that Jandaíra carbonates, fully cemented after early diagenesis, experienced negligible deformation during the first few hundreds of meters of subsidence but were pervasively fractured when they reached depths >400–500 m. Deformation was accommodated by a dense network of sub‐vertical mode I and hybrid fractures associated with sub‐vertical stylolites developed in a stress field characterised by a sub‐horizontal σ₁ and sub‐vertical σ₂. The development of a network of hybrid fractures, rarely reported in the literature, activated the circulation of waters charged in the mountainous region, flowing along the porous Açu sandstone underlying the Jandaíra carbonates and rising to the surface through the fractured carbonates. With persisting subsidence, carbonates reached depths of 800–900 m entering a depth interval characterised by a sub‐vertical σ₁. At this stage, sub‐horizontal stylolites developed liberating calcite which sealed the sub‐vertical open fractures transforming them in veins and preventing further flow. During Tertiary exhumation, several of the pre‐existing veins and stylolites opened and became longer, and new fractures were created typically with the same directions of the older features. The simplicity of our model suggests that most rocks in passive margin settings might have followed a similar evolution and thus display similar structures.     

Understanding the surface hydrology of the Lake Eyre Basin: Part 1—Rainfall

This is the first of two papers that describe the surface hydrology of the Lake Eyre Basin (LEB) (1,140,000 km²) in central Australia and compares some key characteristics with those observed from arid regions globally. This paper concentrates on annual rainfall, whereas the second paper is devoted to streamflow. The first part describes the LEB's climate (arid to semi-arid), which is dominated by a subtropical high pressure ridge stretching latitudinally across central Australia. Then follow major analyses that include the characteristics of rainfall, wet and dry spell lengths and cumulative surpluses and deficiencies, rainfall trends and intra- and inter-decadal fluctuations, and the relationship between rainfall and El Niño-Southern Oscillation (ENSO). The paper concludes with six conclusions, the key ones being: the variability of the annual rainfall (based on the coefficient of variation) in the LEB is approximately 60% greater than that found for stations located in arid regions in the rest of the world; there is a bias towards longer lengths of dry years than observed in the rest of Australia; and, there is a significant lag correlation between rainfall and ENSO, particularly in the east and in the latter part of a year.     

Bootstrapped discrete scale invariance analysis of geomagnetic dipole intensity

The technique of bootstrapped discrete scale invariance allows multiple time-series of different observables to be normalized in terms of observed and predicted characteristic timescales. A case study is presented using the SINT2000 time-series of virtual axial dipole moment, which spans the past 2 Myr. It is shown that this sequence not only bears a clear signature of a preferred timescale of about 55.6 Ka, but additionally predicts similar features (of shorter and longer duration) that are actually observed on the timescales of historical secular variation and dipole reversals, respectively. In turn, the latter two empirical sources both predict the characteristic timescale found in the dipole intensity sequence. These communal scaling characteristics suggest that a single underlying process could be driving dynamo fluctuations across all three observed timescales, from years to millions of years.     

1985-2005年环渤海地区土地利用变化时空格局

Based on TM image data and other survey materials, this paper analyzed the spatiotemporal patterns of land use change in the Bohai Rim during 1985–2005. The findings of this study are summarized as follows: (1) Land use pattern changed dramatically during 1985–2005. Industrial and residential land in urban and rural areas increased by 643,946 hm², of which urban construction land had the largest and fastest increase of 294,953 hm² at an annual rate of 3.72%. (2) The outward migration of rural population did not prevent the expansion of residential land in rural areas by 184,869 hm². This increase reveals that construction of rural residences makes seriously wasteful and inefficient use of land. (3) Arable land, woodland and grassland decreased at a rate of −0.02%, −0.12% and −1.32% annually, while unused land shrank by 157,444 hm² at an annual rate of −1.69%. (4) The change of land use types showed marked fluctuations over the two stages (1985–1995 and 1995–2005). In particular, arable land, woodland and unused land experienced an inversed trend of change. (5) There was a significant interaction between arable land and woodland. Industrial construction land in urban and rural areas showed a net trend of increase during the earlier period, but only adjustment to its internal structure during the second period. The loss of arable land to the construction of factories, mines and residences took place mainly in the fringe areas of large and medium-sized cities, along the routes of major roads, as well as in the economically developed coastal areas in the east. Such changes are closely related to the spatial differentiation of the level of urbanization and industrialization in the region.     

Surface Oscillations of a Free-Falling Droplet of an Ideal Fluid

According to observations, drops freely falling in the air under the action of gravity are deformed and oscillate in a wide range of frequencies and scales. A technique for calculating surface axisymmetric oscillations of a deformed droplet in the linear approximation under the assumption that the amplitude and wavelength are small when compared to the droplet diameter is proposed. The basic form of an axisymmetric droplet is chosen from observations. The calculation results for surface oscillations agree with recorded data on the varying shape of water droplets falling in the air.     

The Mechanical Coupling of Fluid-Filled Granular Material Under Shear

The coupled mechanics of fluid-filled granular media controls the physics of many Earth systems, for example saturated soils, fault gouge, and landslide shear zones. It is well established that when the pore fluid pressure rises, the shear resistance of fluid-filled granular systems decreases, and, as a result, catastrophic events such as soil liquefaction, earthquakes, and accelerating landslides may be triggered. Alternatively, when the pore pressure drops, the shear resistance of these geosystems increases. Despite the great importance of the coupled mechanics of grain–fluid systems, the basic physics that controls this coupling is far from understood. Fundamental questions that must be addressed include: what are the processes that control pore fluid pressurization and depressurization in response to deformation of the granular skeleton? and how do variations of pore pressure affect the mechanical strength of the grains skeleton? To answer these questions, a formulation for the pore fluid pressure and flow has been developed from mass and momentum conservation, and is coupled with a granular dynamics algorithm that solves the grain dynamics, to form a fully coupled model. The pore fluid formulation reveals that the evolution of pore pressure obeys viscoelastic rheology in response to pore space variations. Under undrained conditions elastic-like behavior dominates and leads to a linear relationship between pore pressure and overall volumetric strain. Viscous-like behavior dominates under well-drained conditions and leads to a linear relationship between pore pressure and volumetric strain rate. Numerical simulations reveal the possibility of liquefaction under drained and initially over-compacted conditions, which were often believed to be resistant to liquefaction. Under such conditions liquefaction occurs during short compactive phases that punctuate the overall dilative trend. In addition, the previously recognized generation of elevated pore pressure under undrained compactive conditions is observed. Simulations also show that during liquefaction events stress chains are detached, the external load becomes completely supported by the pressurized pore fluid, and shear resistance vanishes.     

Oceanic versus island arc origin of ophiolites

The silica content of basaltic rocks is an unreliable variable with which to distinguish ultramafic-mafic complexes developed at ocean ridges from those potentially formed beneath volcanic island arcs. Data from Appalachian ophiolites supports the view that silica metasomatism is responsible for the high silica content of supposed calc-alkaline basaltic rocks found in ophiolites such as Troodos, and that the high-silica (70 wt.%) leucocratic rocks associated with ophiolites are of tholeiitic rather than calc-alkaline parentage. The use of titanium as a discriminant of tectonic environment is also suspect because the titanium content of basalts associated with Appalachian ophiolites as well as those recently recovered from the Atlantic ocean floor ranges from values even lower than those typical of island arc tholeiites to values typical of abyssal tholeiites. However, the internal stratigraphy of ophiolites in both the Appalachian and Tethyan systems can only be explained on the basis of the postulate that ophiolites originate at oceanic spreading centres rather than beneath island arcs.     

Regularized derivatives of potential fields and their role in semi-automated interpretation methods

Evaluation of higher derivatives (gradients) of potential fields plays an important role in geophysical interpretation (qualitative and/or quantitative), as has been demonstrated in many approaches and methods. On the other hand, numerical evaluation of higher derivatives is an unstable process – it has the tendency to enlarge the noise content in the original data (to degrade the signal-to-noise ratio). One way to stabilize higher derivative evaluation is the utilization of the Tikhonov regularization. In the submitted contribution we present the derivation of the regularized derivative filter in the Fourier domain as a minimization task by means of using the classical calculus of variations. A very important part of the presented approach is the selection of the optimum regularization parameter – we are using the analysis of the C-norm function (constructed from the difference between two adjacent solutions, obtained for different values of regularization parameter). We show the influence of regularized derivatives on the properties of the classical 3D Euler deconvolution algorithm and apply it to high-sensitivity magnetometry data obtained from an unexploded ordnance detection survey. The solution obtained with regularized derivatives gives better focused depth-estimates, which are closer to the real position of sources (verified by excavation of unexploded projectiles).