SANICLAY: simple anisotropic clay plasticity model

SANICLAY is a new simple anisotropic clay plasticity model that builds on a modification of an earlier model with an associated flow rule, in order to include simulations of softening response under undrained compression following K_o consolidation. Non‐associativity is introduced by adopting a yield surface different than the plastic potential surface. Besides, the isotropic hardening of the yield surface both surfaces evolve according to a combined distortional and rotational hardening rule, simulating the evolving anisotropy. Although built on the general premises of critical state soil mechanics, the model induces a critical state line in the void ratio–mean effective stress space, which is a function of anisotropy. To ease interpretation, the model formulation is presented firstly in the triaxial stress space and subsequently, its multiaxial generalization is developed systematically, in a form appropriate for implementation in numerical codes. The SANICLAY is shown to provide successful simulation of both undrained and drained rate‐independent behaviour of normally consolidated sensitive clays, and to a satisfactory degree of accuracy of overconsolidated clays. The new model requires merely three constants more than those of the modified Cam clay model, all of which are easily calibrated from well‐established laboratory tests following a meticulously presented procedure. Copyright © 2006 John Wiley & Sons, Ltd.     

WEKU – a GIS-Supported stochastic model of groundwater residence times in upper aquifers for the supraregional groundwater management

 The supraregional GIS-supported stochastical model, WEKU, for the determination of groundwater residence times in the upper aquifers of large groundwater provinces is presented. Using a two-dimensional analytical model of groundwater flow, groundwater residence times are determined within two extreme cases. In the first case, maximal groundwater residence times are calculated, representing the part of groundwater, that is drained by the main surface water of a groundwater catchment area. In the second case, minimal groundwater residence times for drainage into the nearest surface water are determined. Using explicit distribution functions of the input parameters, mean values as well as potential ranges of variations of the groundwater residence times are derived. The WEKU model has been used for the determination of groundwater residence times throughout Germany. The model results – mean values and deviations of the groundwater velocity and the maximal and minimal groundwater residence times in the upper aquifers – are presented by general maps and discussed in detail. It is shown that the groundwater residence times in the upper aquifer vary regionally, differentiated between less than 1 year and more than 2000 years. Using this information, the time scales can be specified, until measures to remediate polluted groundwater resources may lead to a substantial groundwater quality improvement in the different groundwater provinces of Germany. With respect to its supraregional scale of application, the WEKU model may serve as a useful tool for the supraregional groundwater management on a state, federal or international level. Received: 15 August 1995 · Accepted: 15 October 1995     

Radon variations in a Hungarian village

 A steady radon exhalation is assumed in most publications. In a village of North-East Hungary, however, high radon concentrations have been measured, differing strongly in neighbouring houses and varying in time, due to the interplay of geochemical phenomena. Received: 20 November 1995 · Accepted: 18 June 1996     

STORING AND CATALOGUING ARCHITECTURAL PHOTOGRAMMETRY MATERIAL

The paper describes the material generated in carrying out architectural photogrammetric surveys. The importance of the archival nature of this material is highlighted and reference is made to the indexing and storing of the records.     

Low-frequency electric field fluctuations excited by ring current protons

Energetic protons haying ring type distributions are shown to generate low-frequency electrostatic waves, propagating nearly transverse to the geomagnetic field lines, in the ring current region by exciting Mode 1 arid Mode 2 nonresonant instabilities and a resonant instability. Mode 1 nonresonant instability has frequencies around ~4 Hz with transverse wavelengths of ~(8–80) km, and it is likely to occur in the region L = (7–8). Mode 2 nonresonant instability can generate frequencies ~(850–1450) Hz with transverse wavelengths ~(2–20) km. The typical frequencies and transverse wavelengths associated with the resonant instability are (950–1250) Hz and (30–65) km. Both the Mode 2 nonresonant instability and the resonant instability can occur in the ring current region with L = (4–6). The low-frequency modes driven by energetic protons could attain maximum saturation electric field amplitude varying from 0.8 mV/m to 70 mV/m. It is suggested that the turbulence produced by the low-frequency modes may cause pitch angle scattering of ring current protons in the region outside the plasmapause resulting in the ring current decay.     

Generating interface waves using a freely falling, instrumentedsource

In recent years, interface waves such as the Scholte wave have become important tools in the study of the geoacoustic properties of near-bottom seafloor sediments. Traditionally, these waves have been generated by explosive or pneumatic sources deployed at or near the seafloor and monitored by ocean-bottom seismographs or geophone arrays. While these sources generate the requisite interface waves, they also produce higher frequency compressional waves in the water and sediment that tend to contaminate the surface wave and make inversion of the data difficult in the near field. In this paper, a new source consisting of a freely falling projectile instrumented with an accelerometer is described. When the projectile impacts the bottom, the exact time history of the vertical force applied to the sediment is known and therefore may be convolved with the transfer function of a sediment geoacoustic model to produce accurate synthetic seismograms. Moreover, the vertical force applied to the seafloor is very efficient in generating surface wave motion while producing very little compressional wave energy so that the near-field signals are much more easily analyzed. An example of the use of the new source is presented including inversion of the received signals to obtain shear-wave velocity and attenuation as a function of depth in the near bottom sediments at a shallow-water site     

Infrared observations of serendipitous hard Chandra X-ray sources

We present observations of a sample of optically faint, hard X-ray sources of the kind likely to be responsible for much of the hard X-ray background. We confirm that such sources are easily detected in the near-infrared, and find that they have a featureless continuum suggesting that the active nucleus is heavily obscured. The infrared colours of the majority of the targets observed are consistent with absorbed elliptical host galaxies at z =1–2. It is likely that we are observing some of the brighter members of the important new class of X-ray type II quasars.     

Three-dimensional coronal structures using clark lake observations

We have undertaken a study of coronal features observed at meter-decameter wavelengths using the Clark Lake radioheliograph. Among the coronal structures we have studied are the radio manifestations of coronal streamers on the solar disk and above the solar limb. We have analyzed the radio data quantitatively, using ray-tracing models for comparison with the maps. Our study provides information about the streamers' three-dimensional shapes, scales, and density profiles, for comparison with related observations using white-light coronagraphs.