The salt composition of rivers in Wrangel Island

Pioneer information about the chemical composition of river water in Wrangel Island has been obtained. It is shown that the water composition reflects the lithogeochemical specifics of primary rocks and ore mineralization. In contrast to many areas of the Russian Far North, river waters of the island are characterized by an elevated background value of total mineralization (i.e., total dissolved solids, TDS) (0.3–2 g/l) and specific chemical type (SO₄-Ca-Mg). This is related to abundance of Late Carboniferous gypsiferous and dolomitic sequences in the mountainous area of the island. It has also been established that the salt composition of some streams is appreciably governed by supergene alterations of the sulfide mineralization associated with the quartz-carbonate vein systems. They make up natural centers of surface water contamination. Waters in such streams are characterized by low pH values (2.4–5.5), high TDS (up to 6–23 g/l) and the SO₄-Mg composition. These waters are also marked by anomalously high concentrations of heavy and nonferrous metals, as well as REE, U, and Th.     

Influence of microstructure of loess on triaxial shear strength

Vicksburg loess is characterized by preferred orientation of constituent grains, which on the average dip 4° toward the west (N 80–85°W). This investigation was undertaken to study, quantitatively, the relationship between natural fabric anisotropies of Vicksburg loess and the orientation of applied stress distribution Results of the study indicate the fabric anisotropies in Vicksburg loess are reflected by definite variation in triaxial shear strength of dry and moist specimens.

In two series of triaxial tests, ultimate strength of the loess is maximum where σ₁ is perpendicular to grain orientation, and it is reduced where the principal stresses are 45° to the fabric plane. In this respect, Vicksburg loess may serve as a structural model for granular earth materials in illustrating the influence of fabric on ultimate strength. Moreover, the Mohr-Coulomb fracture line consists of two line segments, with an increase in slope at higher confining pressure. This characteristic suggests that poorly-cemented sands, or sandstones, and silts, or siltstones, may undergo two failures: one at small strains where cement bonds are disrupted and the other at larger strains where internal shearing resistance of granular components is exceeded.     

Agglutinated abyssal foraminifers of the equatorial pacific

The quantitative study of the distribution and taxonomic composition of recent living and dead (without plasma) benthic foraminifers revealed three foraminiferal assemblages in the bottom sediments of the Pacific Ocean at depths of 3350 to 4981 m. The assemblage dominated by the epibenthic Lagenammina difflugiformis, Reophax dentaliniformis, and Saccorhiza ramosa occupies the slopes of underwater hills. The assemblage with a high share of the infaunal Cribrostomoides subglobosum, C. nitidum, and Ammobaculites agglutinans is registered on the abyssal plateau. The assemblage with a significant proportion of the large Astrorhiza and Reophax species, which are characterized by an active way of life, populates gentle slopes and narrow depressions with potentially strong bottom currents.     

Sulfurous acid (H2SO3) on Io?

Sulfurous acid (H₂SO₃) has never been characterized or isolated on Earth. This is caused by the unfavorable conditions for H₂SO₃ within Earth's atmosphere due to the high temperatures, the high water content and the oxidizing environment. Kinetic investigations by means of transition state theory showed that the half-life of H₂SO₃ at 300 K is 1 day but at 100 K it is increased to 2.7 billion years. Natural conditions to form H₂SO₃ presumably require cryogenic SO₂ or SO₂/H₂O mixtures and high energy proton irradiation at temperatures around 100 K. Such conditions can be found on the Jupiter moons Io and Europa. Therefore, we calculated IR-spectra of H₂SO₃ which we compared with Galileo's spectra of Io and Europa. From the available data we surmise that H₂SO₃ is present on Io and probably but to a smaller extent on Europa.     

An Early Investigation Of The Striated Tail Of Comet Hale-Bopp (C/1995 O1)

The Sekanina-Farrell particle fragmentation model for the striated tails of dust comets is successfully applied to two images of comet Hale-Bopp to study the motions of 12 striae in a time span of March 12–15, 1997. There is evidence for recurring outbursts with a periodicity of 11^h21^m, consistent with results based on analysis of dust jets. The ejecta in all the striae appear to have been released from one source on the nucleus between the end of January and the second half of February 1997, some 60 to 40 days before perihelion. The parent particles were subjected to a radiation pressure acceleration of β_p ≃ 0.55 and their fragmentation lifetimes in 11 of the 12 striae were practically constant and equal to 13–15 days, when normalized to 1 AU from the Sun. Brief analysis of Watanabe et al.'s measurements of striae on their images from March 5–9, 1997 shows even shorter fragmentation lifetimes for the parent particles, mostly about 7–11 days at1 AU. This revised version was published online in July 2006 with corrections to the Cover Date.     

Center-to-Limb Variation of Solar Microwave Bursts

Statistical studies of hard X-ray flares position on the solar disk have shown that the more energetic hard X-rays have a tendency to be more concentrated near the limb rather than at disk center, whereas lower-energy hard X-ray emission seems isotropic. Since the high-frequency radio emission is believed to be produced by the same energetic electron population responsible for the high-energy hard X-rays, we searched the microwave/millimeter emitting bursts for center-to-limb variation in their emission. A total of 499 bursts observed by the radio telescopes in Bern at the frequencies of 3.1, 5.2, 8.4, 11.8, 19.6, 35.0, and 50.0 GHz were analyzed. Simultaneous Hα flares were used for determination of the radio burst position on the solar disk. For each of the 7 frequencies, the peak flux and duration were studied as a function of heliocentric position. For 312 bursts, spectral parameters such as spectral index, peak frequency, and flux at spectral maximum were analyzed. For a subset of 43 bursts with emission at all frequencies, the emission and spectral parameters were analyzed. Center-to-limb variations of the spectral parameters for all bursts were sought. In order to interpret the observational results, we have performed a numerical simulation of gyrosynchrotron spectra. We find that high-frequency events, which are also the more energetic ones, have larger center-to-limb variations in their parameters than do the overall flares. Moreover, this behavior agrees with theoretical predictions.     

Estimation of groundwater recharge rates using soil-water isotope profiles: a case study of two contrasting dune types on Langeoog Island,Germany

Hydrogeology Journal - The creation of artificial dunes for coastal protection may have important consequences for freshwater lenses in coastal aquifers. The objective of this study was to compare...     

Failure Loci of Some Igneous and Metamorphic Rocks

Summary Experimental evidence from true triaxial tests on dense rocks are analysed with emphasis on the failure modes of these materials under multiaxial loading, ambient temperature and external pressure. The strong dependence of the modes of fracture on the secondary components of applied stresses, and especially on the intermediate principal stress, indicated that the failure surface of these brittle materials may be appropriately described by a failure tensor polynomial criterion. As such, the elliptic paraboloid failure criterion was found to conveniently describe their mode of failure, by considering also the severe influence of anisotropy of the material.  For this purpose, a method developed recently (Theocaris and Panagiotopoulos, 1995a, 1995b) was applied, defining anisotropic hardening plasticity through an appropriate sequence of anisotropic elasticity problems. Assuming a particular path of loading or unloading, we measured the instantaneous tension and compression yield stresses along the transient principal-stress directions. These parameters completely define the instantaneous state of anisotropy of the body for the corresponding loading step, by applying the theory of the elliptic paraboloid failure locus (EPFS) (Theocaris, 1989a). A parameter identification problem was formulated on the constitutive expressions for this most general failure criterion. Then, by applying convenient constraints derived from the EPFS theory, which serve as filters throughout the whole procedure, the characteristic values of terms defining the variable components of the failure tensor polynomial were calculated, as the material was continuously loaded from the elastic into the plastic region and up to the ultimate failure load. Accurate simple tests in uniaxial tension and compression provided sufficient data for the definition of the yield loci of the material, at the considered loading step. These tests may be complemented with biaxial and triaxial modes of loading of the specimens. The results improve the accuracy and sensitivity of the method. All such data were used as input values, for establishing the mode of plastic deformation of the body during particular loading paths.  Moreover, the method employed allows the complete definition of the components of the failure, H, and the strength differential effect, h, tensors at each loading step. These quantities define completely the failure tensor polynomial for each material. Therefore, it presents the important advantage over other experimental methods by clearly indicating the parts contributed to the failure mode (either by plasticity, or by the strength differential effect) and their evolution during plastic deformation.  As convenient prototype materials for testing the method, specimens of metamorphic rocks such as Westerly granite (G), or quartzite (Q) were selected. Interesting results concerning the mechanical and especially the failure modes of such materials were obtained. Furthermore, the mechanical tests indicated clearly some basic properties of these materials as concerns the mode of their structure.